Wrote a default flash erase check fn which uses CFI's target algorithm
w/fallback to memory reads.
- "flash info" no longer prints erase status as it is stale.
- "flash erase_check" now prints erase status. erase check can take a
*long* time. Work in progress
- arm7/9 with seperate srst & trst now supports reset init/halt
after a power outage. arm7/9 no longer makes any assumptions
about state of target when reset is asserted.
- fixes for srst & trst capable arm7/9 with reset init/halt
- prepare_reset_halt retired. This code needs to be inside
assert_reset anyway
- haven't been able to get stm32 write algorithm to work. Fallback
flash write does work. Haven't found a version of openocd trunk
where this works.
- added target_free_all_working_areas_restore() which can
let be of restoring backups. This is needed when asserting
reset as the target must be assumed to be an unknown state.
Added some comments to working areas API
- str9 reset script fixes
- some guidelines
- fixed dangling callbacks upon reset timeout
git-svn-id: svn://svn.berlios.de/openocd/trunk@536 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- uses packed transfers for 8/16bit read/writes greater than 4bytes
- 8/16bit transfers now use address auto increment
git-svn-id: svn://svn.berlios.de/openocd/trunk@495 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- switch to synchronous halt during connect. This fixes the bug
where poll() was not invoked between halt() and servicing the
'g' register packet
- halt() no longer returns error code when target is already halted, just
logs a warning. Only the halt() implementation can say anything
meaningful about why a halt() failed, so error messages are pushed
up to halt()
- fixed soft_reset_halt infinite loop bug in arm7_9_common.c. The rest
of the implementations are still busted.
- by using USER() instead of command_print() the log gets the
source + line #. Nice.
- no longer invoke exit() if soft_reset_halt fails. A reset can often
fix the problem.
git-svn-id: svn://svn.berlios.de/openocd/trunk@475 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Small cosmetic fixes in the license header to make them all look the
same, fix some typos, update README.
git-svn-id: svn://svn.berlios.de/openocd/trunk@396 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added arch_state to show status of currently selected target
- simplified target->type->arch_state() api.
- clean up telnet output a bit
- fixed GDB output for arch_state
- removed a couple of unecessary exit()'s
- cleaned up error propagation a bit in a few places
git-svn-id: svn://svn.berlios.de/openocd/trunk@332 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- target request handler disabled by default until a target has been registered
git-svn-id: svn://svn.berlios.de/openocd/trunk@259 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Clean up, remove unused variables and code in armv7, cortex_m3 and stellaris code
- Move restore_context from cortex_m3 to armv7m
- Updated halt handling for cortex_m3
git-svn-id: svn://svn.berlios.de/openocd/trunk@206 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on ARM host (thanks to Vincent Palatin)
- various whitespace fixes
- removed various warnings
- add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann)
- fix OpenOCD compilation for various platforms (thanks to Uwe Hermann and Vincent Palatin)
- switched order of JTAG chain examination and validation (examine first, then multiple validation tries even if examination failed)
- added target_request subsystem to handle requests from the target (debug messages and tracepoints implemented, future enhancements might include
semihosting, all ARM7/9 only for now)
- added support for GDB vFlashXXX packets (thanks to Pavel Chromy)
- added support for receiving data via ARM7/9 DCC
- reworked flash writing. the 'flash write' command is now deprecated and replaced by 'flash write_binary' (old syntax and behaviour) and 'flash
write_image' (write image files (bin, hex, elf, s19) to a target).
- added support for AMD/ST/SST 29F400B non-cfi flashes
git-svn-id: svn://svn.berlios.de/openocd/trunk@190 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- ST STM32x flash support added
- cleaned up armv7m and cortex-m3 support, removed luminary specific code
- cortex-m3 16bit read/write added (required for STM32x flash programming)
git-svn-id: svn://svn.berlios.de/openocd/trunk@177 b42882b7-edfa-0310-969c-e2dbd0fdcd60
