Commit Graph

457 Commits

Author SHA1 Message Date
Marc Schink
7c38f24529 tcl: Adapt config files to new ftdi command syntax
The patch was created automatically using the following
script:

%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---
(cat << EOF
ftdi_device_desc ftdi device_desc
ftdi_serial ftdi serial
ftdi_channel ftdi channel
ftdi_layout_init ftdi layout_init
ftdi_layout_signal ftdi layout_signal
ftdi_set_signal ftdi set_signal
ftdi_get_signal ftdi get_signal
ftdi_vid_pid ftdi vid_pid
ftdi_tdo_sample_edge ftdi tdo_sample_edge
EOF
) | while read a b; do
sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" )
done
%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---

Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6333
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-07-20 14:51:20 +01:00
Marek Vasut
fb34fd60ca tcl/board: Add Renesas Falcon board
Add board configuration for Renesas Falcon board based on the R8A779A0 V3U SoC.

Change-Id: If8369f2e2b97dfea9ccbee2c9b916ef7094f9b92
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/6315
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-26 14:39:37 +01:00
Rohit Singh
af39ee607c tcl: Add support for the Digilent Nexys Video board
* https://store.digilentinc.com/nexys-video-artix-7-fpga-trainer-board-for-multimedia-applications/
* https://reference.digilentinc.com/_media/nexys-video:nexys_video_sch.pdf

The Nexys Video board has FTDI FT2232 whose channel B is connected to
Artix-7 FPGA's JTAG pins, and can be supported by OpenOCD's
ftdi interface. Tested to be working fine on real hardware.

Change-Id: I2996166dc8c2b6c08a9390958adfcdec8fc2bd37
Signed-off-by: Rohit Singh <rohit91.2008@gmail.com>
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/4364
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 23:50:58 +01:00
Marc Schink
3b4e40120b tcl/board: Add ST NUCLEO-8S208RB
Change-Id: I384c6ad9b4cbabbc004160677f600d8c4bd3eb71
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6268
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-05-29 21:36:21 +01:00
Antonio Borneo
30f3a2a650 tcl: remove remaining deprecated commands
There are still few adapter_khz, ftdi_location, jtag_nsrst_delay
and xds110_serial strolling around ...

Change-Id: I3e8503dcc3875e3c92e6536f3d455a5e448d51ff
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6270
Tested-by: jenkins
2021-05-29 21:34:27 +01:00
Antonio Borneo
2a1f3b2574 tcl: fix some minor typo
Minor typos found by the new checkpatch boosted by the dictionary
provided by 'codespell'.
While there, fix one indentation.

Change-Id: I72369ed26f363bacd760b40b8c83dd95e89d28a4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6214
Tested-by: jenkins
2021-05-22 10:06:26 +01:00
Antonio Borneo
f440af41ff tcl/rp2040: remove empty line at end of file
Change-Id: I212a96b77282b151a8ecbd46a6436e2bbbda4161
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6221
Tested-by: jenkins
2021-05-22 10:06:01 +01:00
Antonio Borneo
64d89d5ee1 tcl: [3/3] prepare for jimtcl 0.81 'expr' syntax change
Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single
arg") drops the support for multi-argument syntax for the TCL
command 'expr'.

Fix manually the remaining lines that don't match simple patterns
and would require dedicated boring scripting.
Remove the 'expr' command where appropriate.

Change-Id: Ia75210c8447f88d38515addab4a836af9103096d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6161
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-05-08 09:49:08 +01:00
Antonio Borneo
f5657aa76e tcl: [1/3] prepare for jimtcl 0.81 'expr' syntax change
Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single
arg") drops the support for multi-argument syntax for the TCL
command 'expr'.

In the TCL scripts distributed with OpenOCD there are 1700+ lines
that should be modified before switching to jimtcl 0.81.

Apply the script below on every script in tcl folder. It fixes
more than 92% of the lines

%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---
 #!/usr/bin/perl -Wpi

 my $re_sym = qr{[a-z_][a-z0-9_]*}i;
 my $re_var = qr{(?:\$|\$::)$re_sym};
 my $re_const = qr{0x[0-9a-f]+|[0-9]+|[0-9]*\.[0-9]*}i;
 my $re_item = qr{(?:~\s*)?(?:$re_var|$re_const)};
 my $re_op = qr{<<|>>|[+\-*/&|]};
 my $re_expr = qr{(
     (?:\(\s*(?:$re_item|(?-1))\s*\)|$re_item)
     \s*$re_op\s*
     (?:$re_item|(?-1)|\(\s*(?:$re_item|(?-1))\s*\))
 )}x;

 # [expr [dict get $regsC100 SYM] + HEXNUM]
 s/\[expr (\[dict get $re_var $re_sym\s*\] \+ *$re_const)\]/\[expr \{$1\}\]/;

 # [ expr (EXPR) ]
 # [ expr EXPR ]
 # note: $re_expr captures '$3'
 s/\[(\s*expr\s*)\((\s*$re_expr\s*)\)(\s*)\]/\[$1\{$2\}$4\]/;
 s/\[(\s*expr\s*)($re_expr)(\s*)\]/\[$1\{$2\}$4\]/;
%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---

Change-Id: I0d6bddc6abf6dd29062f2b4e72b5a2b5080293b9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6159
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-05-08 09:48:44 +01:00
Peter Lawrence
b60d06ae32 tcl/board: add pico-debug support
pico-debug is not a board; it is a virtual CMSIS-DAP adapter that
runs on the same RP2040 also being debugged.  This is possible due
to pico-debug running on the normally-dormant second Cortex-M0+
core (Core1), providing debugging of the first core (Core0).
As such, it could be used on a variety of RP2040-based boards.

Since a flash driver is useful (if not essential), a flash driver
is included.  This driver code originated on RPi's bespoke OpenOCD
fork; lipstick was added to this particular pig to make it more
presentable on OpenOCD proper.

no new Clang analyzer warnings

Change-Id: I31f98b5ea1664f0adfbc184b57efba963acfb958
Signed-off-by: Peter Lawrence <majbthrd@gmail.com>
Reviewed-on: http://openocd.zylin.com/6075
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-05-02 22:40:24 +01:00
Antonio Borneo
df443551a8 board: imx53: fix l2 cache initialization
Both http://openocd.zylin.com/542/ and http://openocd.zylin.com/543/
introduce the same typo in the bitfield for initializing the l2
cache of imx53.
One year later, http://openocd.zylin.com/1461/ copy-pastes the same
typo.
The comment above the code show that it's really an error and not
the expected behaviour.

Fix the typo replacing the incorrect comparison '<' with a left
shift.

Change-Id: I43725731a2228e28a676215f76936fa289d9395e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: e3b3273433 ("cfg: add imx53loco board config")
Fixes: 108a458ab8 ("cfg: add icnova_imx53_sodimm board config")
Fixes: e608ced330 ("ftdi/board: Add support for DENX M53EVK")
Reviewed-on: http://openocd.zylin.com/6156
Tested-by: jenkins
Reviewed-by: Adrian M Negreanu <adrian.negreanu@nxp.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2021-04-25 23:04:52 +01:00
Antonio Borneo
bc7d36d886 udev rules: add missing Altera USB Blaster devices
All Altera USB Blaster devices require a dedicated line in the
udev rules, but some USB VID/PID present in interface and board
config file is missing in udev rules.

Add the missing Altera USB Blaster devices in udev rules.
While there, fix an incorrect pair VID/PID that are reported
swapped inside a comment.

Change-Id: I2d67e90b10db99ef2638405585859c1393456f65
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6102
Tested-by: jenkins
2021-04-05 23:24:49 +01:00
Antonio Borneo
b0fe92dba7 zy1000: drop the code, deprecated in v0.10.0
The code for zy1000 has been marked as deprecated in release
v0.10.0, 4 years ago.

Time to drop it!

Change-Id: I08fca2a2bf8f616f031e15fd37dac3197a40ba50
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6090
Tested-by: jenkins
2021-03-19 21:55:50 +00:00
Felipe Balbi
5e57090203 Add configuration file for Olimex H405
Change-Id: I34a030f65ebe041408655ea9792346b146bd1092
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Reviewed-on: http://openocd.zylin.com/6049
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10 21:34:32 +00:00
Anthony Ferranti
cc9e3c2f7b eMAG: Add Ampere eMAG config files
Add board and target configuration files for
Ampere eMAG8180 board and Ampere eMAG processor.

Tested on an Ampere eMAG8180 development platform.

Change-Id: I222653f0fc12d25202a7e469db3594076cbc38ed
Signed-off-by: Anthony Ferranti <ferranti@os.amperecomputing.com>
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-on: http://openocd.zylin.com/5569
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10 21:27:01 +00:00
Nishanth Menon
7e16194828 tcl/board: Add AM642 EVM basic support
Add basic connection details with AM642 EVM

Change-Id: I95dcf6afadb61bfd8456b79274eae863b834167d
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-on: http://openocd.zylin.com/5952
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Vignesh Raghavendra
Tested-by: jenkins
2021-03-10 21:24:23 +00:00
Nishanth Menon
fe09811ea4 tcl/board: Add J7200 EVM basic support
Add basic connection details with J7200 EVM

Change-Id: Ia8fa5033a693ac09849d33693c81b8cb206f17c1
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-on: http://openocd.zylin.com/5951
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-03-10 21:24:18 +00:00
Nishanth Menon
e8c7689c61 tcl/board: Add J721E EVM basic support
Add basic connection details with J721E EVM

Change-Id: I0c2d25252432914d8e371e81761a59c05924bd8e
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-on: http://openocd.zylin.com/5185
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-03-10 21:24:13 +00:00
Nishanth Menon
39f8327639 tcl/board: Add AM654 EVM basic support
Add basic connection details with AM654 evm

Change-Id: Iea2240860e50ae42cf6f1617a10e24f63c6dd988
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-on: http://openocd.zylin.com/5183
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-03-10 21:24:05 +00:00
Tarek BOCHKATI
3d736e0488 flash/stm32l4x: STM32L55/L56xx basic support (non-secure mode)
STM32L5 have 512 Kbytes of Flash memory with dual bank architecture.
STM32L5 flash is quite similar to L4 flash, mainly register names
and offsets and some bits are changed.
NON-SECURE flash is located at 0x8000000 like L4 devices, so no
big change is needed (secure flash will be subject of another change).

Note: flash driver name is set stm32l5x, in order to extend the commands
with specific L5 commands (to manage TZEN for example ...)

Note: this works only when TZEN=0

Change-Id: Ie758abb4aa19a3f29eeb0702d7dcb43992e4c639
Signed-off-by: Michael Jung <mijung@gmx.net>
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5510
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-11-15 21:55:20 +00:00
Antonio Borneo
175f30e695 tcl/board: rename board file ST b-l475e-iot01a
Use the board file name as <company>_<name>.cfg

Add the SPDX tag to workaround an error in checkpatch that fails
to recognize as valid a patch that only changes a file name.

Change-Id: I929cd9e5f9fe2e7386950643487534c9a5a05bc6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: e44539d66c ("Flash, FRAM and EEPROM driver for STM32 QUAD-/OCTOSPI interface")
Reviewed-on: http://openocd.zylin.com/5931
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Tested-by: jenkins
2020-11-15 21:04:21 +00:00
Andreas Bolsch
e44539d66c Flash, FRAM and EEPROM driver for STM32 QUAD-/OCTOSPI interface
- write speed up to 150 kByte/s on STM32F469I-disco (due to
  SWD clock and USB connection), up to 1 MByte/s on Nucleo-F767ZI
  with external STLink-V3 or Nucleo-G474RE with two W25Q256FV in
  dual 4-line mode or STM32H73BI-Disco in octal mode
- tested with STM32L476G-disco (64MBit flash, 3-byte addr),
  STM32F412G-Disco, STM32F469I-Disco, STM32F746G-Disco, and
  STM32L476G-Disco (all 128Mbit flash, 3-byte addr),
  STM32F723E-Disco, STM32F769I-Disco (512Mbit flash, 4-byte addr)
  STM32L4R9I-Disco, STM32L4P5G-Disco (512MBit octo-flash, DTR, 4-byte addr)
  STM32H745I-Disco, STM32H747I-Disco (two 512MBit flash, 4-byte addr)
  STM32H73BI-Disco, STM32H735G-Disco (512MBit octo-flash, DTR, 4-byte addr)
- suitable cfg for Discovery boards included
- limited parsing of SFDP data if flash device not hardcoded
  (tested only in single/quad mode as most devices either don't
  support SFDP at all or have empty(!) SFDP memory)
- 'set' command for auto detection override (e. g. for EEPROMs)
- 'cmd' command for arbitrary SPI commands (reconfiguration, testing etc.)
- makefile for creation of binary loader files
- tcl/board/stm32f469discovery.cfg superseded by stm32f469i-disco.cfg
- tcl/board/stm32f7discovery.cfg removed as name is ambiguous
  (superseded by stm32f746g-disco.cfg vs. stm32f769i-disco.cfg)
- dual 4-line mode tested on Nucleo-F767ZI, Nucleo-H743ZI and Nucleo-H7A3ZI-Q
  with two W25Q256FV, and on Nucleo-L496ZP-P and Nucleo-L4R5ZI
  with two W25Q128FV, sample cfg files included and on STM32H745I-Disco,
  STM32H747I-Disco, STM32H750B-Disco
- read/verify/erase_check uses indirect read mode to work around silicon bug in
  H7, L4+ and MP1 memory mapped mode (last bytes not readable, accessing last
  bytes causes debug interface to hang)
- octospi supported only in single/dual 1-line, 2-line, 4-line
  and single 8-line modes, (not in hyper flash mode)

Requirements:
GPIOs must be initialized appropriately, and SPI flash chip be configured
appropriately (1-line ..., QPI, 4-byte addresses ...). This is board/chip
specific, cf. included cfg files. The driver infers most parameters from
current setting in CR, CCR, ... registers.

Change-Id: I54858fbbe8758c3a5fe58812e93f5f39514704f8
Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-on: http://openocd.zylin.com/4321
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>
2020-11-08 22:46:00 +00:00
Antonio Borneo
91c4c83f44 tcl/board: fix changed target config filenames
In commit a1ce28b118 ("rename some target scripts to be
consistent with the rest") the following renames was applied, but
the old names are still referenced:
	tcl/target/{sam7se512.cfg => at91sam7se512.cfg}
	tcl/target/{sam7x256.cfg => at91sam7x256.cfg}

Fix the board files to use to correct target config filename.

Change-Id: I7698aa0da7db95c2bd9ba7ab8c260905a975c857
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5888
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2020-10-30 22:03:14 +00:00
Antonio Borneo
962697823e tcl/board: drop 'tcl' prefix in 'find' command
When OpenOCD is installed to the host the 'tcl' folder gets
usually installed in /usr/share/openocd/, thus having 'tcl' as
prefix of the target's file causes 'find' to fail.

Remove the 'tcl' folder prefix.

Change-Id: I3dc484c8de6af8f5aae4dd1b230522ee47ae2ba6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5887
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2020-10-30 22:03:10 +00:00
Karl Palsson
a92d275fec board: drop open-bldc
This is a) broken and b) doesn't include anything other than the
(broken) target alias.  Don't see any reason for it to exist.

Change-Id: I833635eeac392bf7c0c39f51ff2f76525ba2d406
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/5884
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-10-30 22:02:03 +00:00
Ulrich-Lorenz Schlüter
a31e579e87 tcl: board/dp_busblaster_v4 Busblaster v4.1a by Seed Studio added
Change-Id: I53141d7f6f022f9dee641858f5fb0e0b70c049f8
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Ulrich-Lorenz Schlüter <audiomobster@gmail.com>
Reviewed-on: http://openocd.zylin.com/5549
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-10-03 11:20:59 +01:00
Jan Kowalewski
1593e4a47e tcl/board: Add QuickLogic QuickFeather configuration
Add configuration for QuickLogic QuickFeather development kit.

Change-Id: I39120714bf0bcafa86e0071c38da84a7d9f12a0d
Signed-off-by: Jan Kowalewski <jkowalewski@antmicro.com>
Reviewed-on: http://openocd.zylin.com/5803
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2020-10-03 11:20:43 +01:00
Alexandre Bourdiol
f1d77a485c tcl/board/st_nucleo_l1.cfg use dualbank configuration
st_nucleo_l1.cfg is based on STM32L152RET6 which support
dualbank flash.

Change-Id: I7ecdb7b7557229465e23eed667f20cd84197dfc7
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Reviewed-on: http://openocd.zylin.com/5829
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-09-05 16:48:26 +01:00
Hellosun Wu
105f8386ad tcl: Add support for NDS V5 target and xc7/Corvette-F1
The "Corvette-F1" is an Arduino-compatible evaluation platform,
which fully supports AndesCore. The board has FTDI FT2232 to
connected to FPGA's JTAG interface.

The "ADP-XC7KFF676" is a development and prototyping board that
provides capacity for evaluation of AndesCore processors.
It works with AICE in-circuit debugging tools.

This patch also include target/nds32v5.cfg to support AndesCore
N22/N25F and AndeShape Platform AE250.

Change-Id: I144d5063d5086d00ec44634a5028b5ea5d2eba33
Signed-off-by: Hellosun Wu <wujiheng.tw@gmail.com>
Reviewed-on: http://openocd.zylin.com/5338
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-08-16 11:48:53 +01:00
Evgeniy Didin
b2821b6074 Introduce tcl config files for Synopsys HSDK board
With this commit we add tcl configure files
for ARCv2 HS Development kit(HSDK). HSDK board
has Quad-core ARC HS38 CPU with L1 and L2
caches.

Change-Id: I372ef45428c7c7ca1421a6da3e5ed08b86f705e0
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Reviewed-on: http://openocd.zylin.com/5784
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-07-26 20:08:31 +01:00
Alistair Francis
7e78c04f1c board: Add the HiFive1 revB board configuration
Change-Id: If186afcfd2c87414b9323569a16aed9a6054c883
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-on: http://openocd.zylin.com/5680
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
2020-06-14 14:23:23 +01:00
Marc Schink
ae4113d877 tcl/boards: Rename 'ek-tm4c1294xl.cfg' to 'ti_ek-tm4c1294xl.cfg'
The new filename has a proper vendor prefix. Keep the old
configuration file for now but show a "deprecated" warning
at runtime.

Change-Id: If7465a752f47f3292e430c8b311148badfd384cd
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/5478
Tested-by: jenkins
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-06-06 18:01:31 +01:00
Marc Schink
fe13f61539 tcl/boards: Rename 'ek-tm4c123gxl.cfg' to 'ti_ek-tm4c123gxl.cfg'
The new filename has a proper vendor prefix. Keep the old
configuration file for now but show a "deprecated" warning
at runtime.

Change-Id: I13871ec13709055843e23b1b6da90694fd60505e
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/5477
Tested-by: jenkins
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-06-06 18:01:22 +01:00
Marc Schink
3076fc601d tcl/boards: Rename 'dk-tm4c129.cfg' to 'ti_dk-tm4c129.cfg'
The new filename has a proper vendor prefix. Keep the old
configuration file for now but show a "deprecated" warning
at runtime.

Change-Id: I30fcb8f291d401acaa1fe665db0eeabc250d24b6
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/5476
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-06-06 18:01:15 +01:00
Antonio Borneo
1156fcd79e tcl/board: add board ST nucleo-8l152r8
The transport SWIM is selected twice, in board and in target, thus
a warning is generated at run-time. It should be fixed by remove a
line in the target file, but does not harm so let's keep it there
for the time being.

Change-Id: I479004dc16005a330d552c8dbd5def61690f9b9f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5543
Tested-by: jenkins
2020-05-24 21:34:18 +01:00
Antonio Borneo
5df5e89cf3 tcl: remove trailing whitespace
The script checkpatch available in new Linux kernel offers an
experimental feature for automatically fix the code in place.
While still experimental, the feature works quite well for simple
fixes, like spacing.

This patch has been created automatically with the script under
review for inclusion in OpenOCD, using the command:
	find tcl/ -type f -exec ./tools/scripts/checkpatch.pl \
	-q --types TRAILING_WHITESPACE --fix-inplace -f {} \;

The patch only changes amount and position of whitespace, thus
the following commands show empty diff
	git diff -w
	git log -w -p
	git log -w --stat

Change-Id: Ie7e3a236f4db9c70019e3b3c7e851edbd3a9dd84
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5616
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins
2020-05-09 14:38:40 +01:00
Antonio Borneo
6d3cb807aa tcl: fix typo and spelling
Identified by checkpatch script from Linux kernel v5.7-rc1 using
the command
	find tcl/ -type f -exec ./tools/scripts/checkpatch.pl \
	-q --types TYPO_SPELLING --strict -f {} \;

Change-Id: I7b523f0ab5ec047ff167742a44c29984ac672cf4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5615
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins
2020-05-09 14:37:35 +01:00
Antonio Borneo
9e23c9ae35 coding style: tcl: remove empty lines at end of text files
Empty lines at end of text files are useless.
Remove them.

Change-Id: I503cb0a96c7ccb132f4486c206a48831121d7abd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5171
Tested-by: jenkins
2020-05-02 15:40:12 +01:00
Liming Sun
699a8475a1 jtag/drivers: add debugging support for Mellanox BlueField SoC
This commits adds debugging support for the Mellanox BlueField
SoC via rshim, which is an interface accessible from external USB
or PCIe (for SmartNIC case) via the rshim driver. It implements
the arm dap interfaces based on the existing dapdirect framework.

Change-Id: I18eb1c54293ec2c581f853e0e55b3f96d7978b56
Signed-off-by: Liming Sun <lsun@mellanox.com>
Reviewed-on: http://openocd.zylin.com/5457
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-04-21 11:18:11 +01:00
Marek Vasut
278c7adcce tcl/target: Drop reference to renesas_gen2_common.cfg
Drop bogus reference to board/renesas_gen2_common.cfg , which is a
non-existing file.

Fixes: a01474bb4c ("tcl/target: Switch Renesas R-Car Gen2 boards to new config")
Change-Id: Icb22d8456b7ac94d3a9a4ed354b246ee1332b122
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5564
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-04-21 10:02:08 +01:00
Antonio Borneo
7a94d0a19f tcl: stm32mp15x: add target and board config files
The stm32mp15x has one or two Cortex-A7 (depending on the P/N) and
one Cortex-M4.
The second core is automatically detected by the target script.
In "engineering boot" all the cores are accessible.
In "production boot" the Cortex-M4 is kept in reset state after
power-on or NRST.

The board DK2 includes a ST-Link/V2, but only SWD is connected.

Change-Id: Ib6ebefcc696b1716e0f98694cadf0b04fd7d11d6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5454
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-04-21 08:52:48 +01:00
Evgeniy Didin
435e6101c6 Introduce ARCv2 tcl config files
With this commit we add tcl files which describes
ARCv2 architecture features and configure files
for ARCv2 EMSK board.

Changes since v1:
-Moved from http://openocd.zylin.com/#/c/5332/4
 into separate commit.

Changes:
22.01.2020:
-Removed "actionpoints" handling code in
 tcl/cpu/arc/v2.tcl because this capability
 is not supported yet.

Changes:
17.03.2020:
-Update Licence headers
-Cleanup indents
-Removed "reset halt" in boards .tcl
-Updated adapter frequency commands

Changes:
15.03.2020:
-Removed "init" in the of boards .tcl

Change-Id: I51bf620abe7b8e046e1dccc861a7d963965d3a42
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-on: http://openocd.zylin.com/5350
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-04-20 18:16:44 +01:00
Edward Fewell
4d7c48fb80 tcl/target: Enable using vectreset for CC3320SF targets
On CC32xx family of devices, sysrequest is disabled, and
vectreset is blocked by the boot loader (stops in a while(1)
statement). srst reset can leave the target in a state
that prevents debug.

This change enables using vectreset on SF variants by
moving the PC to the start of the user application in
internal flash. This allows for a more reliable reset,
but with two caveats:

1) This only works for the SF variant with internal
   flash.

2) This only resets the CPU and not any peripherals.

Tested on CC3220SF rev B Launchpad in both SWD and
JTAG modes. Confirmed proper behavior of reset,
reset init, reset halt, and reset run commands.

Update: reworked per comment in code review. Re-tested
with CC3220SF Launchpad as both CC3220SF and as
CC32xx board to confirm reset behavior as expected.

Update: Added adapter srst delay 1100 line to the
CC3200 LaunchXL configuration file.

Change-Id: Ibc042d785c846c2223ae55b8f2410b75ed2df354
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/5489
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-03-24 17:18:31 +00:00
Edward Fewell
c9ebd488ea drivers: xds110: Add support TCK changes in firmware update
Starting with XDS110 firmware version 3.0.0.0, the peak TCK
frequency became 14,000 kHz. So the delay count calculation
in the current driver has been updated to use the new
formula for setting the TCK speed depending on which version
of the firmware is detected. And because of the changes, the
default TCK settings for the XDS110 based Launchpads can be
adjusted to take advantage of the higher TCK performance.
Note that the values used have been determined through
testing in the automated test labs to be the highest TCK
frequency with the XDS110 that are still reliable.
Different boards have a different peak TCK setting that
should be safe.

Change-Id: I4d66e90d8fac8272641ba4db4a3a510e3b444d86
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/5493
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-03-24 17:17:02 +00:00
Marek Vasut
b304971f38 tcl/target: Unify Renesas R-Car JTAG reset config
Both Gen2 and Gen3 used the same init_reset{} implementation,
pull it into common file and include it from both generations.
Moreover, this behavior is SoC specific, not board specific,
so move the common init_reset into target/ directory.

Change-Id: I5489a4bff9a786da8cb7fd7a515b0c9ce9dc16e3
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5400
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-09 05:59:39 +00:00
luca vinci
6bc0a77a6e bluenrg-x: added support for BlueNRG-LP device
Extended bluenrg-x flash driver with BlueNRG-LP flash controller.
Changes include:
- register set for the flash controller
- made software structure prone to support more easily future devices
- updated target config file

Change-Id: I2e2dc70db32cf98c62e3a43f2e44a4600a25ac5b
Signed-off-by: luca vinci <luca.vinci@st.com>
Reviewed-on: http://openocd.zylin.com/5343
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-03-07 15:31:02 +00:00
Marek Vasut
a01474bb4c tcl/target: Switch Renesas R-Car Gen2 boards to new config
Switch Renesas R-Car Gen2 boards which are currently supported from
the old ad-hoc SoC configuration to the new unified configuration.

Change-Id: I8a67bceb3ae92d840ae4dbac20868c75e83f7d58
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5398
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-02 15:32:33 +00:00
Antonio Borneo
9d5767b6b0 coding style: add newline at end of text files
Some text file is missing newline at EOF.
Add it.

Change-Id: Ieebc790096f40961283c644642e56fde975e957f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5167
Tested-by: jenkins
2020-02-24 10:30:53 +00:00
Tarek BOCHKATI
22df29eee8 tcl/board: update ST NUCLEO-H745ZI-Q configuration file to use dapdirect
this board embeds and STLINK DAP capable firmware

Change-Id: I276e9f44ad6cf7d1ff664898bbc884676bdbc967
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5316
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-23 21:37:30 +00:00
Leonard Crestez
da181fc3ec tcl/board: Add imx8mp-evk
Board includes an internal adapter (interface/ftdi/imx8mp-evk.cfg) and a
standard external ARM-10 connector.

Change-Id: Ibb301011665b1edfb95be1213d8100143f6839dd
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-on: http://openocd.zylin.com/5427
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-23 21:32:37 +00:00