Commit Graph

9422 Commits

Author SHA1 Message Date
Joerg Wunsch d674018432 Add Microchip SAME51 Curiosity Nano board
This board is (software wise) similar to the existing SAME54 Xplained
Pro board, with just a slightly different MCU. (Hardware wise, it
features a vastly different form factor.)

Signed-off-by: Jörg Wunsch <openocd@uriah.heep.sax.de>
Change-Id: I5e5435d49d333fb74471994ee84de59ed983153c
Reviewed-on: https://review.openocd.org/c/openocd/+/6747
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Axel W.
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-11 17:44:58 +00:00
Jan Matyas 654c18a408 doc: Updated RISC-V memory-related cmds in documentation
- "riscv set_prefer_sba" - removed from the doc, superseded
  by the latter
- "riscv set_mem_access" - new command, new entry added
  into the doc

This change only addresses the documentation. The corresponding
implementation of the RISC-V commands is already merged.

Change-Id: I3c07672cde94324407cf667504dba5402f63a543
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6743
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-12-11 17:44:17 +00:00
Jan Matyas d8f64f8e35 doc: Update doc for commands "riscv expose_csrs" and "riscv expose_custom"
These commands were extended/improved in the last drop
of RISC-V target updates. Update also the documentation
to properly describe how the commands should be used now.

Change-Id: I9e2ba6adbe1a4c032b96f5f8ff2d4791fa4c2527
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6738
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
2021-12-11 17:43:40 +00:00
Yasushi SHOJI e5a93e3e7a doc/openocd.texi: Document find and ocd_find command
Document both find and ocd_find command under Config File Guidelines
-> Interface Config Files.  find command is used in the previous
section as well but the previous section is more about using OpenOCD.

The section added is "aimed at any user who needs to write a config
file".

Change-Id: I698207fe58d564c615a15b50756aa5547a5f40b7
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6737
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-11 17:42:52 +00:00
Yasushi SHOJI 37407f4a7b doc/openocd.texi: Document command mode command
Document "command mode" command Server Configuration -> Configuration
Stage.  The text is taken from command's help string.

In addition to the help string, this commit explain the words
mismatch, the doc uses "stage" but the command and source code uses
"mode" to describe the same thing.

Change-Id: I1d5fc8c64a3a0b07ea8430bf016bcbd54e52da1c
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6736
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-11 17:42:33 +00:00
Yasushi SHOJI d7142a5727 target/target: Check checksum_memory before call
Make sure checksum_memory is present.  Otherwise it'll segfault.

Change-Id: If31123323bd8a03282da43505c9604fde735ad0e
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6758
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-11 17:41:46 +00:00
Tomas Vanek 2753c9868e doc: document noinit command
Change-Id: I915c7d3231935fd44407b5fa65d86d4cb93e8db5
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6761
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-11 17:41:01 +00:00
Tomas Vanek dfc9b8e90d doc: list internal commands called by init
Change-Id: I5534c94a983906533a1b38c30ec3eb982e62dee7
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6760
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-11 17:40:43 +00:00
Antonio Borneo 68ec9d2175 adi_v5_swd: add jtag-to-swd through dormant
ARM IHI 0031A does not support SWJ-DP, so no switch between JTAG
and SWD is considered.
ARM IHI 0031B is not publicly available and it's reported as
"Confidential Beta" in the history list in following doc versions.
From ARM IHI 0031C the direct switch between JTAG and SWD is
already deprecated in favor of passing through dormant mode. With
no access to IHI 0031B we haven't info if any device strictly
requires the direct switch.

OpenOCD implements only the deprecated direct switch, so changing
it could cause regression on devices that do not implement dormant
mode.
Plus, not all the adapters support dormant mode.

Nevertheless there are already target devices that only allow
entering in SWD by passing through dormant.

Let the code try both method, alternating one tentative with the
deprecated legacy direct switch, then another tentative passing
through dormant, and repeat till timeout.
This would work on any device that don't support dormant, on new
devices that require switch through dormant and will work with
adapters that don't support dormant.

Change-Id: Ib8619635277d497872079a33fa4e38be9beb84a0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6695
Tested-by: jenkins
2021-12-11 17:39:58 +00:00
Antonio Borneo 8a448573fb cortex_m: remove last references to debugport_init()
The function debugport_init() has never existed in OpenOCD code,
but few comments erroneously references it in place of the
existing function ahbap_debugport_init().

Commit 00dbc185ee ("arm_adi_v5: Split ahbap_debugport_init")
splits the function ahbap_debugport_init() in dap_dp_init() and
mem_ap_init(), but did not removed all the incorrect comments
about debugport_init(). Few of such comments has been removed in
later patches.

Remove the last comment that references debugport_init().

Change-Id: Ibd1f125475386e5653340fedf706903a0ee15897
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6694
Tested-by: jenkins
2021-12-11 17:32:10 +00:00
Jan Matyas b1de116160 gdb_server: added and improved several debug prints
Added and improved several prints related to the GDB connection
and various error states that may occur in relation to this
connection.

Change-Id: I233246190b613cc925b783561cfa3aa5267360fd
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6288
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-12-03 22:00:19 +00:00
Tomas Vanek f735faa931 target,flash: allow target_free_working_area on NULL area pointer
Standard C library free() allows NULL pointer as a parameter.

Change target_free_working_area() to conform this convention.

Remove NULL pointer tests before target_free_working_area() calls.

While on it add missing setting pointer to NULL after target_free_working_area().

Change-Id: I7c692ab04a9933398ba5bc614723ad0bdecb87b3
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6712
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-03 21:59:20 +00:00
Tim Newsome 35f284fe7c flash/nor/fespi: algorithm, large address, errors
* Move more smarts into the target algorithm code, and rewrite that in C
  so it's easier to understand/maintain.
* Support >24-bit addresses.
* Check for errors.

Change-Id: I3b1a143589fe6defafb8f95820aa682acc9646e7
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6679
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-03 21:58:55 +00:00
Yasushi SHOJI 15110b2b5b doc/openocd.texi: Document usage command
Document usage command under General Commands -> Server Commands. The
text is taken from the command's help string.

Change-Id: I957cb46cca98181c3c5e676228c5c103e47bb655
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6735
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-03 21:55:46 +00:00
Yasushi SHOJI 39197e3e53 doc/openocd.texi: Document add_help_text and add_usage_text
Document add_help_text and add_usage_text under Genral Commands ->
Misc Commands.  The text are taken from command's help strings.

Change-Id: I2bbbee8e5faa8d9654227c304e0528f5144275e8
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6734
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-03 21:55:02 +00:00
Tomas Vanek 6179d9f848 doc: document 'cmsis-dap cmd' command
Change-Id: I90b7f020ee2bf078fdf22e3d21423f333ae061ac
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6732
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-03 21:54:03 +00:00
Tomas Vanek bbe8b0df17 doc: fix list of supported nRF52 devices
Change-Id: I64d6d851dd9333689556b7062b1ff38d41b5ad32
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6731
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-03 21:53:49 +00:00
Tomas Vanek 21d11f13ec flash/nor/at91samd: remove 'at91samd info' command
The command is a stub only, does nothing.

Change-Id: Ib3b8c2122a9f6f2e179bee34ac56d0adf367bfcc
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6730
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-03 21:53:36 +00:00
Tomas Vanek c07e4b3782 doc: document 'atsamv gpnvm' command
Change-Id: I922c75e2d074447558f85bfda5421aa24a850be1
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6729
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-03 21:53:22 +00:00
Tomas Vanek abd94b8325 flash/nor/kinetis_ke: remove 'kinetis mdm test_securing' cmd
The command might be a leftover from development of the driver.
There is no documentation what it does.

Change-Id: Iaa5aa1ac51638bd6acce172a5dd03846a165dc27
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6728
Tested-by: jenkins
Reviewed-by: Ivan-Artekit <ivan@artekit.eu>
2021-12-03 21:53:07 +00:00
Tomas Vanek 55da5b47cb flash/nor/kinetis_ke: add .help fields for tcl commands
Add help texts from similar driver kinetis.c

While on it fix one existing help: the flash is obviously not NAND

Change-Id: Ibd295105586b008aaabf2fb4e4a75bf551266e38
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6727
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-03 21:52:49 +00:00
Tomas Vanek af723387be doc: mention SWD multidrop
Change-Id: I361dc351c407b67613eadef4d29e27ed0e00bd05
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6744
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-12-03 21:52:12 +00:00
Antonio Borneo 57d9fd9bbc tcl: stm32mp13x: add target and board config files
The stm32mp13x has one core Cortex-A7.

The board Discovery Kit includes an on-board STLink-V3 with SWD
connection.
The webpage of the board is not active yet.

Change-Id: I8836b26612a160ead79766955ebefaf3d21a329c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6675
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-12-03 21:50:59 +00:00
Antonio Borneo cb0be63b12 jimtcl: update to version 0.81 (2021-11-28)
Change-Id: I374348047331b88e35b6584a5c65d8a73240b8a1
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6757
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-03 21:47:07 +00:00
Doug Brunner 1ad6ed38b6 flash/nor/efm32: fixed BG1x identification
The EFM32 flash driver misidentifies the EFR32BG1B on my board as EFR32MG1B.
Looks like this was caused by a copy-paste error, fixed.

Signed-off-by: Doug Brunner <doug.a.brunner@gmail.com>
Change-Id: I3067f7ba132c2562487da8c2371f63a4843230c1
Reviewed-on: https://review.openocd.org/c/openocd/+/6666
Tested-by: jenkins
Reviewed-by: Fredrik Hederstierna <fredrik.hederstierna@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-11-29 09:50:17 +00:00
Antonio Borneo 1d1386e31e drivers: call adapter_get_required_serial() in jtag_libusb_open()
Now that adapter serial is handled independently from the adapter
drivers, move inside jtag_libusb_open() the call to
adapter_get_required_serial(), so every adapter that uses libusb
will automagically get USB serial support.

Extend the documentation to list the adapters involved.

Change-Id: I75b3482d38f8ed3418329f3106c5e8b689fd460b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6663
Tested-by: jenkins
2021-11-28 11:01:32 +00:00
Antonio Borneo c6460ea36d jtag/hla, jtag/stlink: switch to command 'adapter serial'
The driver hla defines the command 'hla_serial' to specify the
serial string of the adapter.
The driver st-link defines the command 'st-link serial' to specify
the serial string of the adapter.

Remove and deprecate the driver commands and use 'adapter serial'.

Change-Id: I9505c398a77125b1ebf4ba71da7baf4d663b75be
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6657
Tested-by: jenkins
2021-11-28 11:01:16 +00:00
Antonio Borneo ad18c1a47f jtag/jlink: switch to command 'adapter serial'
The driver jlink defines the command 'jlink serial' to specify the
serial string of the adapter.

Remove and deprecate the driver command, and use 'adapter serial'.

Note: in former code the commands 'jlink serial' and 'jlink usb'
were mutually exclusive; running one of them would invalidate the
effect of a previous execution of the other. The new code gives
priority to 'adapter serial', even if executed before 'jlink usb'.

Change-Id: I920b0c136716f459b6fd6f7da8a01a7fa1ed389f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6656
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
2021-11-28 11:00:55 +00:00
Antonio Borneo 61a2f3284b jtag/xds110: switch to command 'adapter serial'
The driver xds110 defines the command 'xds110 serial' to specify
the serial string of the adapter.

Remove and deprecate the driver command, and use 'adapter serial'.

Note: the original command 'xds110 serial' used a complex and
undocumented conversion of the serial number through multibyte
string, wide-character string and C cast. The XDS110 I can access
and the lsusb dumps available through Google don't show any
exotic USB serial that require such conversion. The original
developer doesn't remember any constraint that mandates such
conversion (see comments in https://review.openocd.org/4322/).
The conversion is removed by this patch.

Change-Id: I38909918079b2c1797ad85ebec2fea1b33743606
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6655
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2021-11-28 10:59:23 +00:00
Antonio Borneo 271e5416af jtag/vsllink: switch to command 'adapter serial'
The driver vsllink defines the command 'vsllink usb_serial' to
specify the serial string of the adapter.

Remove and deprecate the driver command, and use 'adapter serial'.

Change-Id: Iadcc018b8aa8974ccd7156915b84e58270fad29d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6654
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2021-11-28 10:59:01 +00:00
Antonio Borneo c41d9f6190 jtag/presto: switch to command 'adapter serial'
The driver presto defines the command 'presto serial' to specify
the serial string of the adapter.

Remove and deprecate the driver command, and use 'adapter serial'.

Change-Id: I1a69acce7d4910082d2029d5941ae84f9424314c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6653
Tested-by: jenkins
2021-11-28 10:58:48 +00:00
Antonio Borneo d7b2313b5a jtag/kitprog: switch to command 'adapter serial'
The driver kitprog defines the command 'kitprog_serial' to specify
the serial string of the adapter.

Remove and deprecate the driver command, and use 'adapter serial'.

Change-Id: I844cb815af01137392b6d12e1b5972fc77ac092d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6652
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2021-11-28 10:58:14 +00:00
Antonio Borneo b1afd3dba4 jtag/ftdi: switch to command 'adapter serial'
The driver ftdi defines the command 'ftdi serial' to specify the
serial string of the adapter.

Remove and deprecate the driver command, and use 'adapter serial'.

Change-Id: Ia5b1f325b9fab8f58b5ea70f8b807e50b148b939
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6651
Tested-by: jenkins
2021-11-28 10:57:22 +00:00
Antonio Borneo 52b9497724 jtag/ft232r: switch to command 'adapter serial'
The driver ft232r defines the command 'ft232r serial_desc' to
specify the serial string of the adapter.

Remove and deprecate the driver command, and use 'adapter serial'.

Change-Id: I0bd909923a668420604fed3c9f6a260716b044c7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6650
Tested-by: jenkins
2021-11-28 10:56:16 +00:00
Antonio Borneo 248161cbf4 jtag/cmsis_dap: switch to command 'adapter serial'
The driver cmsis_dap defines the command 'cmsis_dap_serial' to
specify the serial string of the adapter.

Remove and deprecate the driver command, and use 'adapter serial'.

Change-Id: I88e2d4de360a6c6f23529bb18494962a267250df
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6649
Tested-by: jenkins
2021-11-28 10:55:49 +00:00
Antonio Borneo a3b69dee62 jtag/aice: switch to command 'adapter serial'
The driver aice defines the command 'aice serial' to specify the
serial string of the adapter, but actually does not use this value
in the code.

Remove and deprecate the driver command, and use 'adapter serial'.

Change-Id: I892e0a4e1b41a7a87adf54a5736abf7419f32979
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6648
Tested-by: jenkins
2021-11-28 10:50:50 +00:00
Antonio Borneo 0343ae7cc7 jtag/adapter: add command 'adapter serial'
Several adapter define their own command to specify the USB serial
number or serial string to be used during USB search.

Define a general command 'adapter serial' to be proposed as
replacement of the driver specific ones.
No driver is changed so far to use it.

Change-Id: I7631687a4163ccc63a9bdf3ad1fcb300fc483d3a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6647
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2021-11-28 10:49:51 +00:00
Tomas Vanek f66a16c4a0 target/hla_target: set cortex_m->common_magic
hla_target uses the same struct cortex_m_common as the standard cortex_m
target. Unlike the cortex_m target hla missed setting of common_magic.

Set commont_magic to help pointer verification.

Add convenience tests is_cortex_m_or_hla() and
is_cortex_m_with_dap_access()

Use proper test in cortex_m_verify_pointer() - this code relied on
unset common_magic on hla target before the change.

Change-Id: I4dae79f056c3d73adf524e26aa8ef2d3a57b471e
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6741
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-11-25 09:47:28 +00:00
Antonio Borneo 4626af4401 doc: fix typos in commands definition
Change-Id: Ie07260f229c6bd227bae0bf3dd97d29bf84c72ec
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6725
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-11-23 11:07:24 +00:00
Antonio Borneo 55159ea2e5 doc: remove non-existing command readgroup
The documentation included it in commit 4e79b48e2c ("Add new
target type: OpenRISC"), but the command was never added.

Remove it!

Change-Id: Ice5fa1ee4086b5f5ceb942c3ce68bc9bbd75d19b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 4e79b48e2c ("Add new target type: OpenRISC")
Reviewed-on: https://review.openocd.org/c/openocd/+/6723
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-11-23 11:07:03 +00:00
Antonio Borneo 563a5f5d78 doc: remove non-existing command swd wcr
The commands has been dropped in commit 150b7d26f2 ("arm_adi_v5:
Update DP (Debug Port) registers defined in ADIv5.2.") but the
documentation still keeps it.

Remove it!

Change-Id: I4e88f481d943f064d919f8065562052244122bf0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 150b7d26f2 ("arm_adi_v5: Update DP (Debug Port) registers defined in ADIv5.2.")
Reviewed-on: https://review.openocd.org/c/openocd/+/6722
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-11-23 11:06:49 +00:00
Antonio Borneo cb97a4e821 doc: remove non-existing command riscv set_scratch_ram
The command was proposed in http://review.openocd.org/#/c/4578/2
and dropped in favor on existing work area commands.
Nevertheless the command landed in documentation.

Remove it!

Change-Id: I6e18124256f29be15d8593c07d96f61d19e983f8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: a51ab8ddf6 ("Add RISC-V support.")
Reviewed-on: https://review.openocd.org/c/openocd/+/6721
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
2021-11-23 11:05:35 +00:00
Antonio Borneo cbfd0b9aad flash/psoc6: initialize usage field
The missing initialization triggers a run-time error message:
	Error: BUG: command 'psoc6 reset_halt' does not have the '.usage'
		field filled out

Change-Id: I975e4ba99bd939aa924a9d62b1ab76b2ab5bf193
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6720
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-11-23 11:04:55 +00:00
Antonio Borneo facbb481b8 flash/rp2040: don't initialize to NULL fields in struct
When a struct is initialized, missing fields are already filled
with zero or NULL.
This change simplifies scripts to compare documentation and
registered commands.

Change-Id: I96fbdfa98bbb1f2b5e2a9532faf5a15cb5bc28dd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6719
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-11-23 11:04:42 +00:00
Antonio Borneo 43ea974555 openocd: declare struct command_registration in a single line
To simplify scripts to compare documentation and registered
commands.

Change-Id: I3bed5ba80ea8be1fd615697e80d66b42d7b45fd1
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6718
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-11-23 11:04:26 +00:00
Antonio Borneo b46cb18c91 openocd: use unique name for struct command_registration
Just to avoid name clash when comparing documentation with
registered commands through scripts.

Change-Id: I8832545d8d9236ea5dabe6e73732f51e5246caff
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6717
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2021-11-23 11:04:02 +00:00
Antonio Borneo b5d1b719e5 openocd: use single line for register_commands*()
Do not split in multiple lines the calls to register_commands*().
No change in code behaviour, just make it easy to grep in the code
and identify the commands that can be registered.
This would help detecting undocumented commands.

Change-Id: Id654e107cdabf7ee31fc3d227c1d2a59acc5669e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6716
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-11-23 11:03:38 +00:00
Tomas Vanek 8d9379c9ba target/arm_dap: check SWD DAP configuration
Raise error if

* more than one plain SWD DAPs are defined

* plain and multidrop DAPs are mixed

* two multidrop DAPs have the same TARGETSEL value

Inspired by Graham Sanderson's http://review.openocd.org/4935

Change-Id: I7279744464f5cc6477e50695c596be9c5e5507bf
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6142
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-11-20 14:48:26 +00:00
Tomas Vanek d203399787 target/adi_v5_swd: add support for SWD multidrop
Based on Graham Sanderson's http://review.openocd.org/4935

Unlike Graham Sanderson's version this patch does not add
any multidrop specific queuing.

Multidrop SWD is handled mostly by the same code as single SWD,
just a selection sequence is prepended to a SWD operation
as needed.

This is a minimal working implementation without checking for
configuration errors (mixing multidrop and non multidrop DPs,
multiple use of the same selection id etc...).

Multidrop switching likely demands changes in the adapter code.

Change-Id: I99a5742c209b49c0483e800f6105cb5e59a897d9
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6141
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-11-20 14:47:54 +00:00
Tomas Vanek b973a76d86 target/arm_adi_v5,arm_dap: introduce multidrop_targetsel and its configuration
Add multidrop_targetsel to struct adiv5_dap.
Add option -dp-id and -instance-id to dap create command.
Add convenience function dap_is_multidrop()

Change-Id: Ibb93abb5f50b3665c320a10c1497421035762134
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6140
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-11-20 14:47:04 +00:00