94db77a0e6
This enable the stm32f2x flash driver to use the asynchronous algorithm support. Speed increase is as follows: before - wrote 1048576 bytes from file stm32f4x.bin in 30.453804s (33.625 KiB/s) after - wrote 1048576 bytes from file stm32f4x.bin in 23.679497s (43.244 KiB/s) This also fixes a bug that was in the old flash loader. The old loader waited while bit16 of the status reg was 0, the new loader waits until this bit is 0 as stated in the flash spec. Bizarrely this bug did not effect programming on any tested parts. Change-Id: I3efc94d42cbe81283673a8f4203700638080af6e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/460 Tested-by: jenkins |
||
---|---|---|
.. | ||
checksum | ||
flash | ||
README |
Included in these directories are the src to the various ram loaders used within openocd. ** target checksum loaders ** checksum/armv4_5_crc.s : - ARMv4 and ARMv5 checksum loader : see target/arm_crc_code.c:arm_crc_code checksum/armv7m_crc.s : - ARMv7m checksum loader : see target/armv7m.c:cortex_m3_crc_code checksum/mips32.s : - MIPS32 checksum loader : see target/mips32.c:mips_crc_code ** target flash loaders ** flash/pic32mx.s : - Microchip PIC32 flash loader : see flash/nor/pic32mx.c:pic32mx_flash_write_code flash/stellaris.s : - TI Stellaris flash loader : see flash/nor/stellaris.c:stellaris_write_code flash/stm32x.s : - ST STM32 flash loader : see flash/nor/stm32x.c:stm32x_flash_write_code flash/str7x.s : - ST STR7 flash loader : see flash/nor/str7x.c:str7x_flash_write_code flash/str9x.s : - ST STR9 flash loader : see flash/nor/str9x.c:str9x_flash_write_code Spencer Oliver spen@spen-soft.co.uk