openocd/tcl/chip/atmel/at91/at91_wdt.cfg
Antonio Borneo 573a39b36c tcl: add SPDX tag
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
	fgrep -rL SPDX tcl | while read a;do \
	sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
	}' $a;done

With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.

Change-Id: Ief3da306a6e1978de7dfb8f552f9ff23151f9944
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7030
Tested-by: jenkins
2022-06-24 21:54:12 +00:00

20 lines
962 B
INI

# SPDX-License-Identifier: GPL-2.0-or-later
set AT91_WDT_CR [expr {$AT91_WDT + 0x00}] ;# Watchdog Control Register
set AT91_WDT_WDRSTT [expr {1 << 0}] ;# Restart
set AT91_WDT_KEY [expr {0xa5 << 24}] ;# KEY Password
set AT91_WDT_MR [expr {$AT91_WDT + 0x04}] ;# Watchdog Mode Register
set AT91_WDT_WDV [expr {0xfff << 0}] ;# Counter Value
set AT91_WDT_WDFIEN [expr {1 << 12}] ;# Fault Interrupt Enable
set AT91_WDT_WDRSTEN [expr {1 << 13}] ;# Reset Processor
set AT91_WDT_WDRPROC [expr {1 << 14}] ;# Timer Restart
set AT91_WDT_WDDIS [expr {1 << 15}] ;# Watchdog Disable
set AT91_WDT_WDD [expr {0xfff << 16}] ;# Delta Value
set AT91_WDT_WDDBGHLT [expr {1 << 28}] ;# Debug Halt
set AT91_WDT_WDIDLEHLT [expr {1 << 29}] ;# Idle Halt
set AT91_WDT_SR [expr {$AT91_WDT + 0x08}] ;# Watchdog Status Register
set AT91_WDT_WDUNF [expr {1 << 0}] ;# Watchdog Underflow
set AT91_WDT_WDERR [expr {1 << 1}] ;# Watchdog Error