2aada5b8d9
Commit d9ba56c295
did a bunch of
renaming of cortex_a8 to cortex_a, including the names in config
files. However that introduced a regression as the name in target_type
struct remained unchanged.
This adds the last missing bit: actual renaming of the target name as
understood by OpenOCD.
Also change the (hopefully) last instance of using it in the supplied
config files, namely from imx6.cfg.
Change-Id: Ib9289fc6d946630133ec6e36c20015ccb50acf61
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1420
Tested-by: jenkins
Reviewed-by: Chris Johns <chrisj@rtems.org>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
57 lines
1.5 KiB
INI
57 lines
1.5 KiB
INI
# Freescale i.MX6 series single/dual/quad core processor
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME imx6
|
|
}
|
|
|
|
# CoreSight Debug Access Port
|
|
if { [info exists DAP_TAPID] } {
|
|
set _DAP_TAPID $DAP_TAPID
|
|
} else {
|
|
set _DAP_TAPID 0x4ba00477
|
|
}
|
|
|
|
jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x01 -irmask 0x0f \
|
|
-expected-id $_DAP_TAPID
|
|
|
|
# SDMA / no IDCODE
|
|
jtag newtap $_CHIPNAME sdma -irlen 4 -ircapture 0x00 -irmask 0x0f
|
|
|
|
# System JTAG Controller
|
|
if { [info exists SJC_TAPID] } {
|
|
set _SJC_TAPID SJC_TAPID
|
|
} else {
|
|
set _SJC_TAPID 0x0191c01d
|
|
}
|
|
set _SJC_TAPID2 0x2191c01d
|
|
|
|
jtag newtap $_CHIPNAME sjc -irlen 5 -ircapture 0x01 -irmask 0x1f \
|
|
-expected-id $_SJC_TAPID -expected-id $_SJC_TAPID2
|
|
|
|
# GDB target: Cortex-A9, using DAP, configuring only one core
|
|
# Base addresses of cores:
|
|
# core 0 - 0x82150000
|
|
# core 1 - 0x82152000
|
|
# core 2 - 0x82154000
|
|
# core 3 - 0x82156000
|
|
set _TARGETNAME $_CHIPNAME.cpu.0
|
|
target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap \
|
|
-coreid 0 -dbgbase 0x82150000
|
|
|
|
# some TCK cycles are required to activate the DEBUG power domain
|
|
jtag configure $_CHIPNAME.sjc -event post-reset "runtest 100"
|
|
|
|
proc imx6_dbginit {target} {
|
|
# General Cortex A8/A9 debug initialisation
|
|
cortex_a dbginit
|
|
}
|
|
|
|
# Slow speed to be sure it will work
|
|
jtag_rclk 1000
|
|
$_TARGETNAME configure -event reset-start { jtag_rclk 1000 }
|
|
|
|
$_TARGETNAME configure -event reset-assert-post "imx6_dbginit $_TARGETNAME"
|
|
$_TARGETNAME configure -event gdb-attach { halt }
|