openocd/src/target
Paul Fertser c7384117c6 Allow transports to override the selected target (hla configs unification)
This should allow to share common configs for both regular access and
high-level adapters.

Use the newly-added functionality in stlink and icdi drivers, amend
the configs accordingly.

Runtime-tested with a TI tm4c123g board.

Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
[gus@projectgus.com: context-specific deprecation warnings]
Signed-off-by: Angus Gratton <gus@projectgus.com>
[andrew.smirnov@gmail.com: additional nrf51.cfg mods]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1664
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-11 21:25:56 +00:00
..
openrisc openrisc: add support for JTAG Serial Port 2014-06-22 08:39:08 +00:00
xscale update files to correct FSF address 2013-06-05 19:52:42 +00:00
adi_v5_cmsis_dap.c swd: Remove support for turnaround periods other than 1 2014-06-28 09:32:21 +00:00
adi_v5_jtag.c adi_v5: Remove unused features of the DAP and SWD interfaces 2014-06-28 09:26:36 +00:00
adi_v5_swd.c Relax polling check if not in JTAG mode 2014-06-28 09:34:55 +00:00
algorithm.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
algorithm.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm_adi_v5.c adi_v5_swd: Read RDBUFF once after a sequence of AP reads 2014-06-28 09:26:12 +00:00
arm_adi_v5.h adi_v5: Make sure all bit masks are unsigned and wide enough. 2014-06-28 09:32:41 +00:00
arm_disassembler.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm_disassembler.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm_dpm.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm_dpm.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm_jtag.c Retire jtag_add_dr_out 2014-01-20 13:28:26 +00:00
arm_jtag.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm_opcodes.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm_semihosting.c Remove unnecessary (void *) 2013-10-31 20:42:47 +00:00
arm_semihosting.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm_simulator.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm_simulator.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm.h target: fix incorrect arm cpu monitor mode encoding 2014-04-14 18:15:57 +00:00
arm7_9_common.c target: use target_buffer_set_u32_array 2013-11-07 21:38:49 +00:00
arm7_9_common.h arm7_9: Avoid infinite loops in bulk write dispatching 2013-10-15 20:41:08 +00:00
arm7tdmi.c Retire jtag_add_dr_out 2014-01-20 13:28:26 +00:00
arm7tdmi.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm9tdmi.c arm7_9: Avoid infinite loops in bulk write dispatching 2013-10-15 20:41:08 +00:00
arm9tdmi.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm11_dbgtap.c Don't cast return value of [cm]alloc 2014-03-30 03:53:45 +00:00
arm11_dbgtap.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm11.c target: remove unimplemented target_request_data implementations 2013-09-08 16:12:41 +00:00
arm11.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm720t.c [RFC] target: Move bulk_write_memory to arm7_9 2013-09-13 19:33:28 +00:00
arm720t.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm920t.c arm920t: fix write memory operations with caches enabled 2014-01-24 12:48:43 +00:00
arm920t.h arm7_9: Avoid infinite loops in bulk write dispatching 2013-10-15 20:41:08 +00:00
arm926ejs.c arm926ejs: fix write memory operations with caches enabled 2014-02-11 13:38:39 +00:00
arm926ejs.h arm7_9: Avoid infinite loops in bulk write dispatching 2013-10-15 20:41:08 +00:00
arm946e.c Clean up many C99 integer types format specifiers 2013-10-31 20:40:03 +00:00
arm946e.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
arm966e.c [RFC] target: Move bulk_write_memory to arm7_9 2013-09-13 19:33:28 +00:00
arm966e.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
armv4_5_cache.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
armv4_5_cache.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
armv4_5_mmu.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
armv4_5_mmu.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
armv4_5.c Add GDB remote target description support for ARM4 2014-01-23 21:39:13 +00:00
armv4_5.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
armv7a.c Disable multiprocessor-id read on ARMv7-R cores 2014-06-01 17:37:56 +00:00
armv7a.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
armv7m.c armv7m: remove magic numbers for number of core registers 2014-03-29 07:47:48 +00:00
armv7m.h armv7m: remove magic numbers for number of core registers 2014-03-29 07:47:48 +00:00
avr32_ap7k.c mips32, dsp563xx: fix segfault on Gdb attach 2014-04-14 18:18:13 +00:00
avr32_ap7k.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
avr32_jtag.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
avr32_jtag.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
avr32_mem.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
avr32_mem.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
avr32_regs.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
avr32_regs.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
avrt.c target: remove unimplemented target_request_data implementations 2013-09-08 16:12:41 +00:00
avrt.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
breakpoints.c Clean up many C99 integer types format specifiers 2013-10-31 20:40:03 +00:00
breakpoints.h gdb server: new feature, add stop reason in stop reply packet for gdb 2013-08-07 21:01:08 +00:00
cortex_a.c cortex_a: target implementation renames cortex_a8 to cortex_a 2014-07-03 21:45:04 +00:00
cortex_a.h cortex_a: target implementation renames cortex_a8 to cortex_a 2014-07-03 21:45:04 +00:00
cortex_m.c Add error handling and remove double readout. 2014-06-28 18:50:53 +00:00
cortex_m.h cortex_m: target implementation renames cortex_m3 to cortex_m 2013-10-10 20:51:03 +00:00
dsp563xx_once.c dsp563xx: Adding breakpoint/watchpoint support. 2013-07-15 10:05:15 +00:00
dsp563xx_once.h dsp563xx: Adding breakpoint/watchpoint support. 2013-07-15 10:05:15 +00:00
dsp563xx.c mips32, dsp563xx: fix segfault on Gdb attach 2014-04-14 18:18:13 +00:00
dsp563xx.h dsp563xx: Adding breakpoint/watchpoint support. 2013-07-15 10:05:15 +00:00
dsp5680xx.c flash: Constify write buffer 2014-03-17 12:47:18 +00:00
dsp5680xx.h flash: Constify write buffer 2014-03-17 12:47:18 +00:00
embeddedice.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
embeddedice.h Retire jtag_add_dr_out 2014-01-20 13:28:26 +00:00
etb.c target: fix typos 2014-01-19 19:26:12 +00:00
etb.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
etm_dummy.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
etm_dummy.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
etm.c target: fix typos 2014-01-19 19:26:12 +00:00
etm.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
fa526.c arm7_9: Avoid infinite loops in bulk write dispatching 2013-10-15 20:41:08 +00:00
feroceon.c target: use target_buffer_set_u32_array 2013-11-07 21:38:49 +00:00
hla_target.c hla: Make consistent parameter naming 2013-11-07 22:19:50 +00:00
image.c Constify received GDB packet 2014-03-04 20:17:34 +00:00
image.h Constify received GDB packet 2014-03-04 20:17:34 +00:00
lakemont.c quark_x10xx: cleanup of LOG format specifiers 2014-05-31 12:01:31 +00:00
lakemont.h quark_x10xx: cleanup of LOG format specifiers 2014-05-31 12:01:31 +00:00
Makefile.am Fix some problems with the bin2char utility 2014-08-02 09:01:32 +00:00
mips_ejtag.c mips32: new code for pracc exec 2014-05-09 20:40:31 +00:00
mips_ejtag.h mips32: new code for pracc exec 2014-05-09 20:40:31 +00:00
mips_m4k.c mips_m4k.c: make sure fast_data_area is safe 2014-07-10 20:00:22 +00:00
mips_m4k.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
mips32_dmaacc.c Clean up const usage to avoid excessive casting 2013-10-31 20:42:34 +00:00
mips32_dmaacc.h Clean up const usage to avoid excessive casting 2013-10-31 20:42:34 +00:00
mips32_pracc.c target/mips32_pracc: fix C99 format specifiers 2014-05-31 12:02:28 +00:00
mips32_pracc.h mips32: new code for pracc exec 2014-05-09 20:40:31 +00:00
mips32.c mips: load code in buffer mode 2014-05-09 20:37:42 +00:00
mips32.h gdb_server: support gdb target description 2013-08-07 21:00:40 +00:00
nds32_aice.c nds32: support multi-target debugging 2013-09-13 19:37:58 +00:00
nds32_aice.h nds32: support multi-target debugging 2013-09-13 19:37:58 +00:00
nds32_cmd.c target: remove memory leaks 2014-03-29 08:04:55 +00:00
nds32_cmd.h nds32: add new target type nds32_v2, nds32_v3, nds32_v3m 2013-06-05 19:27:35 +00:00
nds32_disassembler.c target/nds32_disassembler: fix format specifiers warnings 2014-02-04 21:18:27 +00:00
nds32_disassembler.h nds32: add new target type nds32_v2, nds32_v3, nds32_v3m 2013-06-05 19:27:35 +00:00
nds32_edm.h nds32: add new target type nds32_v2, nds32_v3, nds32_v3m 2013-06-05 19:27:35 +00:00
nds32_insn.h nds32: add new target type nds32_v2, nds32_v3, nds32_v3m 2013-06-05 19:27:35 +00:00
nds32_reg.c Clean up many C99 integer types format specifiers 2013-10-31 20:40:03 +00:00
nds32_reg.h nds32: add new target type nds32_v2, nds32_v3, nds32_v3m 2013-06-05 19:27:35 +00:00
nds32_tlb.c nds32: add new target type nds32_v2, nds32_v3, nds32_v3m 2013-06-05 19:27:35 +00:00
nds32_tlb.h nds32: add new target type nds32_v2, nds32_v3, nds32_v3m 2013-06-05 19:27:35 +00:00
nds32_v2.c Conform to C99 integer types format specifiers 2014-01-15 12:40:42 +00:00
nds32_v2.h nds32: add new target type nds32_v2, nds32_v3, nds32_v3m 2013-06-05 19:27:35 +00:00
nds32_v3_common.c Conform to C99 integer types format specifiers 2014-01-15 12:40:42 +00:00
nds32_v3_common.h nds32: remove .soft_reset_halt dependency 2013-09-13 19:38:09 +00:00
nds32_v3.c Conform to C99 integer types format specifiers 2014-01-15 12:40:42 +00:00
nds32_v3.h nds32: add new target type nds32_v2, nds32_v3, nds32_v3m 2013-06-05 19:27:35 +00:00
nds32_v3m.c Conform to C99 integer types format specifiers 2014-01-15 12:40:42 +00:00
nds32_v3m.h nds32: add new target type nds32_v2, nds32_v3, nds32_v3m 2013-06-05 19:27:35 +00:00
nds32.c Don't cast return value of [cm]alloc 2014-03-30 03:53:45 +00:00
nds32.h nds32: Remove unused declaration 2013-10-15 20:41:27 +00:00
oocd_trace.c oocd_trace: fix warnings 2013-07-15 09:54:44 +00:00
oocd_trace.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
quark_x10xx.c quark_x10xx: add new target quark_x10xx 2014-02-11 13:07:29 +00:00
register.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
register.h gdb: add default description reg types 2013-09-21 20:08:16 +00:00
smp.c Constify received GDB packet 2014-03-04 20:17:34 +00:00
smp.h Constify received GDB packet 2014-03-04 20:17:34 +00:00
startup.tcl tcl: introduce using_(jtag|swd|hla) helpers and use them in reset handler 2014-06-28 09:28:12 +00:00
target_request.c target: check target supports target_request_data 2013-09-08 16:12:27 +00:00
target_request.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
target_type.h target: add profiling interface 2013-09-13 19:37:07 +00:00
target.c Allow transports to override the selected target (hla configs unification) 2014-08-11 21:25:56 +00:00
target.h flash: Constify write buffer 2014-03-17 12:47:18 +00:00
testee.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
trace.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
trace.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
x86_32_common.c quark_x10xx: cleanup of LOG format specifiers 2014-05-31 12:01:31 +00:00
x86_32_common.h quark_x10xx: cleanup of LOG format specifiers 2014-05-31 12:01:31 +00:00
xscale.c Fix some problems with the bin2char utility 2014-08-02 09:01:32 +00:00
xscale.h target: xscale more human vector catching 2013-07-01 08:44:59 +00:00