stm32f1x: fix bug in flash loader and restrict instruction set to armv6-m

Correct the offset to the read pointer when clearing it on error.

Also restrict the instruction set to armv6-m so the flash driver can be
used on Cortex-M0 parts with the same flash controller.

Change-Id: I380f9dabcc41fb6e4d43a7e02f355e2381913f39
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/399
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
This commit is contained in:
Andreas Fritiofson 2012-01-25 01:10:24 +01:00 committed by Spencer Oliver
parent 61f3d4b7e4
commit 81b4ef6ee5
2 changed files with 51 additions and 36 deletions

View File

@ -20,7 +20,7 @@
.text
.syntax unified
.cpu cortex-m3
.cpu cortex-m0
.thumb
.thumb_func
.global write
@ -34,6 +34,7 @@
* Clobbered:
* r5 - rp
* r6 - wp, tmp
* r7 - tmp
*/
#define STM32_FLASH_CR_OFFSET 0x10 /* offset of CR register from flash reg base */
@ -48,24 +49,31 @@ wait_fifo:
beq wait_fifo
movs r6, #1 /* set PG flag to enable flash programming */
str r6, [r0, #STM32_FLASH_CR_OFFSET]
ldrh r6, [r5], #2 /* "*target_address++ = *rp++" */
strh r6, [r4], #2
ldrh r6, [r5] /* "*target_address++ = *rp++" */
strh r6, [r4]
adds r5, #2
adds r4, #2
busy:
ldr r6, [r0, #STM32_FLASH_SR_OFFSET] /* wait until BSY flag is reset */
tst r6, #1
movs r7, #1
tst r6, r7
bne busy
tst r6, #0x14 /* check the error bits */
movs r7, #0x14 /* check the error bits */
tst r6, r7
bne error
cmp r5, r3 /* wrap rp at end of buffer */
it cs
addcs r5, r2, #8
bcc no_wrap
mov r5, r2
adds r5, #8
no_wrap:
str r5, [r2, #4] /* store rp */
subs r1, r1, #1 /* decrement halfword count */
cbz r1, exit /* loop if not done */
b wait_fifo
cmp r1, #0
beq exit /* loop if not done */
b wait_fifo
error:
movs r0, #0
str r0, [r2, #2] /* set rp = 0 on error */
str r0, [r2, #4] /* set rp = 0 on error */
exit:
mov r0, r6 /* return status in r0 */
bkpt #0

View File

@ -635,35 +635,42 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
/* #define STM32_FLASH_CR_OFFSET 0x10 */
/* #define STM32_FLASH_SR_OFFSET 0x0C */
/* wait_fifo: */
0x16, 0x68, /* ldr r6, [r2, #0] */
0x00, 0x2e, /* cmp r6, #0 */
0x1a, 0xd0, /* beq exit */
0x55, 0x68, /* ldr r5, [r2, #4] */
0xb5, 0x42, /* cmp r5, r6 */
0xf9, 0xd0, /* beq wait_fifo */
0x01, 0x26, /* movs r6, #1 */
0x06, 0x61, /* str r6, [r0, #STM32_FLASH_CR_OFFSET] */
0x35, 0xf8, 0x02, 0x6b, /* ldrh r6, [r5], #2 */
0x24, 0xf8, 0x02, 0x6b, /* strh r6, [r4], #2 */
0x16, 0x68, /* ldr r6, [r2, #0] */
0x00, 0x2e, /* cmp r6, #0 */
0x1a, 0xd0, /* beq exit */
0x55, 0x68, /* ldr r5, [r2, #4] */
0xb5, 0x42, /* cmp r5, r6 */
0xf9, 0xd0, /* beq wait_fifo */
0x01, 0x26, /* movs r6, #1 */
0x06, 0x61, /* str r6, [r0, #STM32_FLASH_CR_OFFSET] */
0x2e, 0x88, /* ldrh r6, [r5, #0] */
0x26, 0x80, /* strh r6, [r4, #0] */
0x02, 0x35, /* adds r5, #2 */
0x02, 0x34, /* adds r4, #2 */
/* busy: */
0xc6, 0x68, /* ldr r6, [r0, #STM32_FLASH_SR_OFFSET] */
0x16, 0xf0, 0x01, 0x0f, /* tst r6, #1 */
0xfb, 0xd1, /* bne busy */
0x16, 0xf0, 0x14, 0x0f, /* tst r6, #0x14 */
0x07, 0xd1, /* bne error */
0x9d, 0x42, /* cmp r5, r3 */
0x28, 0xbf, /* it cs */
0x02, 0xf1, 0x08, 0x05, /* addcs r5, r2, #8 */
0x55, 0x60, /* str r5, [r2, #4] */
0x01, 0x39, /* subs r1, r1, #1 */
0x19, 0xb1, /* cbz r1, exit */
0xe4, 0xe7, /* b wait_fifo */
0xc6, 0x68, /* ldr r6, [r0, #STM32_FLASH_SR_OFFSET] */
0x01, 0x27, /* movs r7, #1 */
0x3e, 0x42, /* tst r6, r7 */
0xfb, 0xd1, /* bne busy */
0x14, 0x27, /* movs r7, #0x14 */
0x3e, 0x42, /* tst r6, r7 */
0x08, 0xd1, /* bne error */
0x9d, 0x42, /* cmp r5, r3 */
0x01, 0xd3, /* bcc no_wrap */
0x15, 0x46, /* mov r5, r2 */
0x08, 0x35, /* adds r5, #8 */
/* no_wrap: */
0x55, 0x60, /* str r5, [r2, #4] */
0x01, 0x39, /* subs r1, r1, #1 */
0x00, 0x29, /* cmp r1, #0 */
0x02, 0xd0, /* beq exit */
0xe3, 0xe7, /* b wait_fifo */
/* error: */
0x00, 0x20, /* movs r0, #0 */
0xc2, 0xf8, 0x02, 0x00, /* str r0, [r2, #2] */
0x00, 0x20, /* movs r0, #0 */
0x50, 0x60, /* str r0, [r2, #4] */
/* exit: */
0x30, 0x46, /* mov r0, r6 */
0x00, 0xbe, /* bkpt #0 */
0x30, 0x46, /* mov r0, r6 */
0x00, 0xbe, /* bkpt #0 */
};
/* flash write code */