Commit Graph

50 Commits

Author SHA1 Message Date
David Brownell d60ebc0ab5 jtag/tcl.c cleanup -- split out "adapter.c"
Clean up the jtag/tcl.c file, which was one of the biggest and
messiest ones in that directory.  Do it by splitting out all the
generic adapter commands to a separate "adapter.c" file (leaving
the "tcl.c" file holding only JTAG utilities).

Also rename the little-used "jtag interface" to "adapter_name", which
should have been at least re-categorized earlier (it's not jtag-only).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-27 10:07:13 -07:00
Spencer Oliver 3ad171cd53 SCRIPT: add add_script_search_dir cmd
Add a add_script_search_dir cmd so that adding search
dir's can be added to cfg scripts.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-17 09:57:44 +00:00
David Brownell 1bd3ae3986 rename jtag_nsrst_assert_width as adapter_nsrst_assert_width
Globally rename "jtag_nsrst_assert_width" as "adapter_nsrst_assert_width",
and move it out of the "jtag" command group ...  it needs to be used with
non-JTAG transports

Includes a migration aid (in jtag/startup.tcl) so that old user scripts
won't break.  That aid should Sunset in about a year.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 08:42:26 -07:00
David Brownell b559b273b5 rename jtag_nsrst_delay as adapter_nsrst_delay
Globally rename "jtag_nsrst_delay" as "adapter_nsrst_delay", and move it
out of the "jtag" command group ...  it needs to be used with non-JTAG
transports

Includes a migration aid (in jtag/startup.tcl) so that old user scripts
won't break.  That aid should Sunset in about a year.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 08:41:30 -07:00
David Brownell 96f9790279 rename jtag_khz as adapter_khz
Globally rename "jtag_khz" as "adapter_khz", and move it out of the "jtag"
command group ...  it needs to be used with non-JTAG transports

Includes a migration aid (in jtag/startup.tcl) so that old user scripts
won't break.  That aid should Sunset in about a year.  (We may want to
update it to include a nag message too.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 08:37:43 -07:00
Michal Demin 24e1e3dd26 Add support for Bus Pirate as a JTAG adapter.
This includes a driver and matching config file.  This support needs to be
enabled through the initial "configure" (use "--enable-buspirate").

Signed-off-by: Michal Demin <michaldemin@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-11 11:35:50 -08:00
David Brownell 53b3d4dd53 LPC1768 updates, IAR board support
Fix some issues with the generic LPC1768 config file:

 - Handle the post-reset clock config:  4 MHz internal RC, no PLL.
   This affects flash and JTAG clocking.

 - Remove JTAG adapter config; they don't all support trst_and_srst

 - Remove the rest of the bogus "reset-init" event handler.

 - Allow explicit CCLK configuration, instead of assuming 12 MHz;
   some boards will use 100 Mhz (or the post-reset 4 MHz).

 - Simplify: rely on defaults for endianness and IR-Capture value

 - Update some comments too

Build on those fixes to make a trivial config for the IAR LPC1768
kickstart board (by Olimex) start working.

Also, add doxygen to the lpc2000 flash driver, primarily to note a
configuration problem with driver: it wrongly assumes the core clock
rate never changes.  Configs that are safe for updating flash after
"reset halt" will thus often be unsafe later ... e.g. for LPC1768,
after switching to use PLL0 at 100 MHz.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-02 15:02:01 -08:00
David Brownell e70d42a727 new "stellaris recover" command
Stellaris chips have a procedure for restoring the chip to
what's effectively the "as-manufactured" state, with all the
non-volatile memory erased.  That includes all flash memory,
plus things like the flash protection bits and various control
words which can for example disable debugger access.  clearly,
this can be useful during development.

Luminary/TI provides an MS-Windows utility to perform this
procedure along with its Stellaris developer kits.  Now OpenOCD
users will no longer need to use that MS-Windows utility.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-27 00:31:35 -08:00
David Brownell b853b9dbc0 Open the merge window for the 0.5.0 release cycle.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-21 13:27:37 -08:00
David Brownell a2ce3a51df NEWS: mention removal of obsolete commands
Removed remaining support for various commands, like advice for
migrating old-style TAP declarations.

The documentation no longer describes them either ... so if users have
been delaying config updates, they may need to consult older releases.

ALL this stuff has been clearly marked as "do not use" for at least a
year now, so anyone still using it hasn't been holding up their end.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-13 20:14:49 -08:00
David Brownell 82c3c47825 NEWS updates
Summarize most ARM11 and Cortex-A8 updates as "acting much more
like other ARMs", and mention code sharing.

Clarify a few other points, including support for "reset-assert"
on all ARMs except Cortex-M (which doesn't exactly need it).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-22 22:49:42 -08:00
David Brownell 187ccb60ee NEWS: include s3c64xx NAND driver
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-15 09:36:01 -08:00
David Brownell 73566405b6 NOR: add optional "flash erase_address" sector padding
Add a NOR flash mechanism where erase_address ranges can be padded
out to sector boundaries, triggering a diagnostic:

  > flash erase_address 0x0001f980 16
  address range 0x0001f980 .. 0x0001f98f is not sector-aligned
  Command handler execution failed
  in procedure 'flash' called at file "command.c", line 647
  called at file "command.c", line 361
  >

  > flash erase_address pad 0x0001f980 16
  Adding extra erase range, 0x0001f800 to 0x0001f97f
  Adding extra erase range, 0x0001f990 to 0x0001fbff
  erased address 0x0001f980 (length 16) in 0.095975s (0.163 kb/s)
  >

This addresses what would otherwise be something of a functional
regression.  An earlier version of the interface had a dangerous
problem:  it would silently erase data outside the range it was
told to erase.  Fixing that bug turned up some folk who relied on
that unsafe behavior.  (The classic problem with interface bugs!)
Now they can get that behavior again.  If they really need it,
just specify "pad".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-13 23:33:25 -08:00
David Brownell d91941d5a0 Cortex-M3: improved core exception handling
This updates three aspects of debugger/exception interactions:

 - Save the user's "vector_catch" setting, and restore it after reset.
   Previously, it was obliterated (rather annoyingly) each time.

 - Don't catch BusFault and HardFault exceptions unless the user says
   to do so.  Target firmware may need to handle them.

 - Don't modify SHCSR to prevent escalating BusFault to HardFault.
   Target firmware may expect to handle it as a HardFault.

Those simplifications fix several bugs.  In one annoying case, OpenOCD
would cause the target to lock up on ome faults which triggered after
the debugger disconnected.

NOTE:  a known remaining issue is that OpenOCD can still leave DEMCR
set after an otherwise-clean OpenOCD shutdown.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-13 03:17:23 -08:00
David Brownell c1cb20971e Coexist with quilt: rename PATCHES --> PATCHES.txt
The issues is on Win32, which ignores case in filesystem
and thus doesn't tolerate the quilt "patches" directory.

Rename, and add "patches" to .gitignore so that developers
can choose to use quilt for local patch management.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-08 17:20:47 -08:00
David Brownell ec297e4bf1 Fix Luminary FT2232 layout docs/configs
Most of this patch updates documentation and comments for various
Luminary boards, supporting two bug fixes by helping to make sense
of the current mess:

 - Recent rev C lm3s811 eval boards didn't work.  They must use
   the ICDI layout, which sets up some signals that the older
   boards didn't need.  This is actually safe and appropriate
   for *all* recent boards ... so just make "luminary.cfg" use
   the ICDI layout.

 - "luminary-lm3s811.cfg", was previously unusable!  No VID/PID;
   and the wrong vendor string.  Make it work, but reserve it
   for older boards where the ICDI layout is wrong.

 - Default the LM3748 eval board to "luminary.cfg", like the
   other boards.  If someone uses an external JTAG adapter, all
   boards will use the same workaround (override that default).

The difference between the two FT2232 layouts is that eventually
the EVB layout will fail cleanly when asked to enable SWO trace,
but the ICDI layout will as cleanly be able to enable it.  Folk
using "luminary.cfg" with Rev B boards won't see anything going
wrong until SWO support is (someday) added.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-28 12:59:47 -08:00
Catalin Patulea 84dbf8ab5a Driver for USB-JTAG, Altera USB-Blaster and compatibles
The 10-pin JTAG layout used with these adapters is used by
a variety of platforms including AVR.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-26 15:05:06 -08:00
David Brownell 07c06ec5e2 Packaging fix, NEWS update
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-21 12:50:17 -08:00
David Brownell abe8b43755 ETM: add "etm trigger_debug" command
In conjunction with manual register setup, this lets the ETM trigger
cause entry to debug state.   It should make it easier to test and
bugfix the ETM code, by enabling non-trace usage and isolating bugs
specific to thef ETM support.  (One current issue being that trace
data collection using the ETB doesn't yet behave.)

For example, many ARM9 cores with an ETM should be able to implement
four more (simple) breakpoints and two more (simple) watchpoints than
the EmbeddedICE supports.  Or, they should be able to support complex
breakpoints, incorporating ETM sequencer, counters, and/or subroutine
entry/exit criteria int criteria used to trigger debug entry.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-19 13:09:19 -08:00
David Brownell 9abad965ab ETM trigger_percent becomes an ETB command
This command was misplaced; it's not generic to all traceport drivers,
only the ETB supports this kind of configuration.  So move it, and
update the relevant documentation.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-19 13:06:46 -08:00
David Brownell bfadd79965 NEWS: mention libftdi 0.17 2009-12-19 13:01:30 -08:00
David Brownell 3f18900b19 NOR FLASH: only erase/unlock whole sectors
Much to my surprise, I observed a "flash erase_address ..."
command erasing data which I said should not be erased.

The issue turns out to be generic NOR flash code which was
silently, and rather dangerously, morphing partial-sector
references into unrequested whole-sector ones.

This patch removes that low-level morphing.  If desired, it
can and should be done in higher level code.  (We might need
to fix some stuff in the GDB server code.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-18 10:16:52 -08:00
David Brownell a0edb8a328 ARM11: basic watchpoint support
Use the DPM watchpoint support; remove old incomplete stubs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-04 18:57:31 -08:00
Nicolas Pitre ed59dfc80a basic ARM semihosting support
Semihosting enables code running on an ARM target to use the
I/O facilities on the host computer. The target application must
be linked against a library that forwards operation requests by
using the SVC instruction that is trapped at the Supervisor Call
vector by the debugger.  The "hosted" library version provided
with CodeSourcery's Sourcery G++ Lite for ARM EABI is one example.

This is currently available for ARM9 processors, but any ARM
variant should be able to support this with little additional work.

Tested using binaries compiled with Sourcery G++ Lite 2009q1-161
and ARM RVCT 3.0.

[dbrownell@users.sourceforge.net: doc tweaks, NEWS]

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-03 18:42:01 -08:00
David Brownell a65e75ea34 Tcl and doc: update to match new 'arm mcr ...' etc
Make them match the C code.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-01 01:10:19 -08:00
David Brownell 5782999f60 NEWS: mention new reset-assert event
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-27 18:53:43 -08:00
David Brownell 83568b6b62 NEWS updates
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-25 16:05:35 -08:00
Zachary T Welch 49036463db update NEWS with recent developments
Mention changes to flash bank command syntax, 'nand verify' command,
command error handling and reporting, and help/usage command upgrades.
2009-11-25 12:08:06 -08:00
Andreas Fritiofson 0583cb0a0d support for scripts in $HOME/.openocd
Add $HOME/.openocd as the first default script search directory, allowing
the user to override the standard scripts.

Update the user guide with information on where OpenOCD expects to find
configuration files and scripts. Also fixed some minor formatting issues.

Add entry to NEWS as well.

Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-24 08:57:02 +01:00
David Brownell f86137066a ARM: "armv4_5" command prefix becomes "arm"
Rename the "armv4_5" command prefix to straight "arm" so it makes
more sense for newer cores.  Add a simple compatibility script.

Make sure all the commands give the same "not an ARM" diagnostic
message (and fail properly) when called against non-ARM targets.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-16 16:36:09 -08:00
David Brownell 5d1a9033ab ARM11: use now-generic memory utils
Now the ARM11 cores can use the renamed arm_checksum_memory()
and arm_blank_check_memory() routines ... do so.

Sanity checked with "flash erase_check" of both NOR banks on an
OMAP2420 ... the algorithm code dumped four lines of of "poll"
status after each of almost 520 blocks (yes, *very* annoying) but
gave plausible results after producing that spam.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-15 10:35:47 -08:00
Krzysztof Kajstura 2970696e89 JTAG: support KT-LINK adapter
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-04 21:20:44 -08:00
David Brownell 067501b0c7 Version 0.4.0-dev
Add "-dev" tag.  Update minor version number.
Archive old NEWS file, start a new one.
2009-11-04 19:44:36 -08:00
David Brownell efa7f8b4bb NEWS: mention switch to git! 2009-11-04 17:03:20 -08:00
David Brownell 0e37ea6499 NEWS refs repository history, not ChangeLog
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-04 15:54:33 -08:00
David Brownell 8152106419 NEWS: more info
There were a few more changes worth mentioning, including support
for more JTAG adapters, boundary scan improvements, another NAND
driver, and the Win64 stuff.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-30 20:21:31 -07:00
David Brownell 19b84dafb0 ARM: rename "arm9tdmi vector_catch" to "arm9 ..."
And update doc accordingly.  That EmbeddedICE register was
introduced for ARM9TDMI and then carried forward into most
new chips that use EmbeddedICE.
2009-10-25 14:03:14 -07:00
David Brownell 60e24aa597 make PXA255 targets enumerate sort-of-OK
Startup now mostly works, except that the initial target state
is "unknown" ... previously, it refused to even start.

Getting that far required fixing the ircapture value (which
can never have been correct!) and the default JTAG clock rate,
then providing custom reset script.

The "reset" command is still iffy.  DCSR updates, and loading
the debug handler, report numerous DR/IR capture failures.
But once that's done, "poll" reports that the CPU is halted
(which it shouldn't be, this was "reset run"!), due to the
rather curious reason "target-not-halted".

Summary:  you still can't debug these parts, but it's closer.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-08 23:51:50 -07:00
David Brownell 6160a946ec add overridable Tcl "init_reset"
This abstracts the "jtag arp_init-reset" call into a method
called from OpenOCD startup and reset processing.

Platforms which have different requirements for how such hard
resets must be performed can now override "init_reset" instead
of needing to rebuild custom hacked versions of the server.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-08 23:51:50 -07:00
dbrownell 3aa9fabfe9 Update the NEWS file to cover more of the user-visible changes.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2798 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-05 08:14:57 +00:00
oharboe ae17ce23eb arm11 hardware step using simulation + breakpoint. Use "hardware_step enable" command to revert to hardware stepping. Ideally we could retire the "hardware_step enable" command once we no longer believe it to be necessary.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2643 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-27 10:37:01 +00:00
oharboe 11856bcffc Michael Schwingen <rincewind@discworld.dascon.de> news about xscale
git-svn-id: svn://svn.berlios.de/openocd/trunk@2627 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-26 07:11:16 +00:00
oharboe 34e8c67b1f David Brownell <david-b@pacbell.net> Various updates to 0.3.0 NEWS
git-svn-id: svn://svn.berlios.de/openocd/trunk@2625 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25 20:03:35 +00:00
zwelch 4eb2e50e4d Archive released NEWS file: NEWS -> NEWS-0.2.0
Create new NEWS file from release script template.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2522 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-14 09:02:00 +00:00
zwelch 1930e08b99 Add NEWS file for the 0.2.0 release.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2474 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06 11:26:21 +00:00
ntfreak 4272b1989d - fix typo's
git-svn-id: svn://svn.berlios.de/openocd/trunk@991 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-22 20:58:57 +00:00
oharboe f8c133dfc5 Removed some obsolete stuff + Pushing things in the direction of openocd.texi
git-svn-id: svn://svn.berlios.de/openocd/trunk@990 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-21 08:36:42 +00:00
ntfreak 9e5a6679ca - added svn props
- fixed mixed line endings on flash.c, log.c, gdb_server.c

git-svn-id: svn://svn.berlios.de/openocd/trunk@371 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-28 10:07:54 +00:00
bodylove d7aec2f1e3 [MERGE] Merged all remaining changes between trunk and xscale big-endian branch.
They are now in sync.

        xscale-be branch is now closed.

git-svn-id: svn://svn.berlios.de/openocd/trunk@271 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-21 20:34:58 +00:00
drath 8b4e882a16 - prepare OpenOCD for branching, created ./trunk/
git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 10:36:31 +00:00