More driver related changes.
This commit is contained in:
parent
67fd015ca3
commit
9488499f5d
|
@ -58,6 +58,8 @@ void Error_Handler(void);
|
||||||
/* USER CODE END EFP */
|
/* USER CODE END EFP */
|
||||||
|
|
||||||
/* Private defines -----------------------------------------------------------*/
|
/* Private defines -----------------------------------------------------------*/
|
||||||
|
#define LCD_BL_Pin GPIO_PIN_1
|
||||||
|
#define LCD_BL_GPIO_Port GPIOB
|
||||||
/* USER CODE BEGIN Private defines */
|
/* USER CODE BEGIN Private defines */
|
||||||
|
|
||||||
/* USER CODE END Private defines */
|
/* USER CODE END Private defines */
|
||||||
|
|
|
@ -24,14 +24,30 @@ typedef enum {
|
||||||
OTM_ERROR
|
OTM_ERROR
|
||||||
} otm_ret_t;
|
} otm_ret_t;
|
||||||
|
|
||||||
|
typedef enum {
|
||||||
|
OTM_HORIZONTAL,
|
||||||
|
OTM_HORIZONTAL_INV,
|
||||||
|
OTM_VERTICAL,
|
||||||
|
OTM_VERTICAL_INV
|
||||||
|
} otm_direction_t;
|
||||||
|
|
||||||
typedef struct {
|
typedef struct {
|
||||||
otm_ret_t (*write_cmd_cb)(void *handle, otm_data_t reg, otm_data_t val);
|
otm_ret_t (*write_reg_cb)(void *handle, otm_data_t *reg, uint8_t len);
|
||||||
otm_ret_t (*write_data_cb)(void *handle, otm_data_t *data, uint32_t len);
|
otm_ret_t (*write_data_cb)(void *handle, otm_data_t *data, uint32_t len);
|
||||||
|
otm_ret_t (*delay_cb)(void *handle, uint32_t usec);
|
||||||
} otm_cb_t;
|
} otm_cb_t;
|
||||||
|
|
||||||
typedef struct {
|
typedef struct {
|
||||||
|
otm_direction_t direction;
|
||||||
void *user_data;
|
void *user_data;
|
||||||
otm_cb_t cb;
|
otm_cb_t cb;
|
||||||
} otm_t;
|
} otm_t;
|
||||||
|
|
||||||
|
#define OTM_ERROR_CHECK(x) if(x != OTM_OK) return OTM_ERROR
|
||||||
|
|
||||||
|
otm_ret_t otm_lcd_init(otm_t *lcd);
|
||||||
|
otm_ret_t otm_lcd_display(otm_t *lcd, uint8_t on);
|
||||||
|
otm_ret_t otm_lcd_upload(otm_t *lcd, uint16_t x1, uint16_t x2, uint16_t y1, uint16_t y2, uint16_t *data);
|
||||||
|
otm_ret_t otm_lcd_direction(otm_t *lcd, otm_direction_t direction);
|
||||||
|
|
||||||
#endif
|
#endif
|
|
@ -0,0 +1,10 @@
|
||||||
|
#ifndef __OTM_LCD_IMPL_H
|
||||||
|
#define __OTM_LCD_IMPL_H
|
||||||
|
|
||||||
|
#include "otm8009a_lcd.h"
|
||||||
|
|
||||||
|
otm_ret_t _otm_impl_write_reg(void *handle, otm_data_t *reg, uint8_t len);
|
||||||
|
otm_ret_t _otm_impl_write_data(void *handle, otm_data_t *data, uint32_t len);
|
||||||
|
otm_ret_t _otm_impl_delay(void *handle, uint32_t usec);
|
||||||
|
|
||||||
|
#endif
|
|
@ -56,6 +56,12 @@ void SVC_Handler(void);
|
||||||
void DebugMon_Handler(void);
|
void DebugMon_Handler(void);
|
||||||
void PendSV_Handler(void);
|
void PendSV_Handler(void);
|
||||||
void SysTick_Handler(void);
|
void SysTick_Handler(void);
|
||||||
|
void PVD_AVD_IRQHandler(void);
|
||||||
|
void FLASH_IRQHandler(void);
|
||||||
|
void RCC_IRQHandler(void);
|
||||||
|
void FPU_IRQHandler(void);
|
||||||
|
void QUADSPI_IRQHandler(void);
|
||||||
|
void HSEM1_IRQHandler(void);
|
||||||
/* USER CODE BEGIN EFP */
|
/* USER CODE BEGIN EFP */
|
||||||
|
|
||||||
/* USER CODE END EFP */
|
/* USER CODE END EFP */
|
||||||
|
|
|
@ -23,6 +23,10 @@
|
||||||
/* Private includes ----------------------------------------------------------*/
|
/* Private includes ----------------------------------------------------------*/
|
||||||
/* USER CODE BEGIN Includes */
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
#include <string.h>
|
||||||
|
#include "otm8009a_lcd.h"
|
||||||
|
#include "otm_lcd_impl.h"
|
||||||
|
|
||||||
/* USER CODE END Includes */
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
/* Private typedef -----------------------------------------------------------*/
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
@ -49,6 +53,15 @@ SRAM_HandleTypeDef hsram1;
|
||||||
|
|
||||||
/* USER CODE BEGIN PV */
|
/* USER CODE BEGIN PV */
|
||||||
|
|
||||||
|
otm_t g_lcd = {
|
||||||
|
.cb = {
|
||||||
|
.delay_cb = _otm_impl_delay,
|
||||||
|
.write_data_cb = _otm_impl_write_data,
|
||||||
|
.write_reg_cb = _otm_impl_write_reg
|
||||||
|
},
|
||||||
|
.user_data = NULL
|
||||||
|
};
|
||||||
|
|
||||||
/* USER CODE END PV */
|
/* USER CODE END PV */
|
||||||
|
|
||||||
/* Private function prototypes -----------------------------------------------*/
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
@ -75,6 +88,9 @@ int main(void)
|
||||||
{
|
{
|
||||||
/* USER CODE BEGIN 1 */
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
SCB->VTOR = 0x90000000;
|
||||||
|
__enable_irq();
|
||||||
|
|
||||||
/* USER CODE END 1 */
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
/* MPU Configuration--------------------------------------------------------*/
|
/* MPU Configuration--------------------------------------------------------*/
|
||||||
|
@ -109,6 +125,12 @@ int main(void)
|
||||||
MX_RTC_Init();
|
MX_RTC_Init();
|
||||||
/* USER CODE BEGIN 2 */
|
/* USER CODE BEGIN 2 */
|
||||||
|
|
||||||
|
otm_lcd_init(&g_lcd);
|
||||||
|
otm_lcd_direction(&g_lcd, OTM_HORIZONTAL_INV);
|
||||||
|
uint32_t color[1024];
|
||||||
|
memset(color, 0xFF, 1024 * 4);
|
||||||
|
otm_lcd_upload(&g_lcd, 0, 99, 0, 9, (uint16_t *)color);
|
||||||
|
|
||||||
/* USER CODE END 2 */
|
/* USER CODE END 2 */
|
||||||
|
|
||||||
/* Infinite loop */
|
/* Infinite loop */
|
||||||
|
@ -154,7 +176,7 @@ void SystemClock_Config(void)
|
||||||
RCC_OscInitStruct.PLL.PLLM = 8;
|
RCC_OscInitStruct.PLL.PLLM = 8;
|
||||||
RCC_OscInitStruct.PLL.PLLN = 336;
|
RCC_OscInitStruct.PLL.PLLN = 336;
|
||||||
RCC_OscInitStruct.PLL.PLLP = 2;
|
RCC_OscInitStruct.PLL.PLLP = 2;
|
||||||
RCC_OscInitStruct.PLL.PLLQ = 2;
|
RCC_OscInitStruct.PLL.PLLQ = 4;
|
||||||
RCC_OscInitStruct.PLL.PLLR = 2;
|
RCC_OscInitStruct.PLL.PLLR = 2;
|
||||||
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_0;
|
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_0;
|
||||||
RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
|
RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
|
||||||
|
@ -182,7 +204,7 @@ void SystemClock_Config(void)
|
||||||
}
|
}
|
||||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_QSPI
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_QSPI
|
||||||
|RCC_PERIPHCLK_FMC|RCC_PERIPHCLK_CKPER;
|
|RCC_PERIPHCLK_FMC|RCC_PERIPHCLK_CKPER;
|
||||||
PeriphClkInitStruct.FmcClockSelection = RCC_FMCCLKSOURCE_D1HCLK;
|
PeriphClkInitStruct.FmcClockSelection = RCC_FMCCLKSOURCE_PLL;
|
||||||
PeriphClkInitStruct.QspiClockSelection = RCC_QSPICLKSOURCE_CLKP;
|
PeriphClkInitStruct.QspiClockSelection = RCC_QSPICLKSOURCE_CLKP;
|
||||||
PeriphClkInitStruct.CkperClockSelection = RCC_CLKPSOURCE_HSI;
|
PeriphClkInitStruct.CkperClockSelection = RCC_CLKPSOURCE_HSI;
|
||||||
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
|
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
|
||||||
|
@ -205,6 +227,8 @@ static void MX_QUADSPI_Init(void)
|
||||||
|
|
||||||
/* USER CODE BEGIN QUADSPI_Init 0 */
|
/* USER CODE BEGIN QUADSPI_Init 0 */
|
||||||
|
|
||||||
|
return;
|
||||||
|
|
||||||
/* USER CODE END QUADSPI_Init 0 */
|
/* USER CODE END QUADSPI_Init 0 */
|
||||||
|
|
||||||
/* USER CODE BEGIN QUADSPI_Init 1 */
|
/* USER CODE BEGIN QUADSPI_Init 1 */
|
||||||
|
@ -354,6 +378,7 @@ static void MX_FMC_Init(void)
|
||||||
*/
|
*/
|
||||||
static void MX_GPIO_Init(void)
|
static void MX_GPIO_Init(void)
|
||||||
{
|
{
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
|
||||||
/* GPIO Ports Clock Enable */
|
/* GPIO Ports Clock Enable */
|
||||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||||
|
@ -363,6 +388,16 @@ static void MX_GPIO_Init(void)
|
||||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||||
|
|
||||||
|
/*Configure GPIO pin Output Level */
|
||||||
|
HAL_GPIO_WritePin(LCD_BL_GPIO_Port, LCD_BL_Pin, GPIO_PIN_SET);
|
||||||
|
|
||||||
|
/*Configure GPIO pin : LCD_BL_Pin */
|
||||||
|
GPIO_InitStruct.Pin = LCD_BL_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
HAL_GPIO_Init(LCD_BL_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
||||||
/* USER CODE BEGIN 4 */
|
/* USER CODE BEGIN 4 */
|
||||||
|
@ -436,6 +471,21 @@ void MPU_Config(void)
|
||||||
MPU_InitStruct.IsCacheable = MPU_ACCESS_CACHEABLE;
|
MPU_InitStruct.IsCacheable = MPU_ACCESS_CACHEABLE;
|
||||||
MPU_InitStruct.IsBufferable = MPU_ACCESS_BUFFERABLE;
|
MPU_InitStruct.IsBufferable = MPU_ACCESS_BUFFERABLE;
|
||||||
|
|
||||||
|
HAL_MPU_ConfigRegion(&MPU_InitStruct);
|
||||||
|
/** Initializes and configures the Region and the memory to be protected
|
||||||
|
*/
|
||||||
|
MPU_InitStruct.Enable = MPU_REGION_ENABLE;
|
||||||
|
MPU_InitStruct.Number = MPU_REGION_NUMBER4;
|
||||||
|
MPU_InitStruct.BaseAddress = 0x60000000;
|
||||||
|
MPU_InitStruct.Size = MPU_REGION_SIZE_256MB;
|
||||||
|
MPU_InitStruct.SubRegionDisable = 0x0;
|
||||||
|
MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL0;
|
||||||
|
MPU_InitStruct.AccessPermission = MPU_REGION_FULL_ACCESS;
|
||||||
|
MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_DISABLE;
|
||||||
|
MPU_InitStruct.IsShareable = MPU_ACCESS_SHAREABLE;
|
||||||
|
MPU_InitStruct.IsCacheable = MPU_ACCESS_NOT_CACHEABLE;
|
||||||
|
MPU_InitStruct.IsBufferable = MPU_ACCESS_BUFFERABLE;
|
||||||
|
|
||||||
HAL_MPU_ConfigRegion(&MPU_InitStruct);
|
HAL_MPU_ConfigRegion(&MPU_InitStruct);
|
||||||
/* Enables the MPU */
|
/* Enables the MPU */
|
||||||
HAL_MPU_Enable(MPU_HFNMI_PRIVDEF_NONE);
|
HAL_MPU_Enable(MPU_HFNMI_PRIVDEF_NONE);
|
||||||
|
|
|
@ -50,17 +50,87 @@ uint16_t otm8009a_800480_16b_init_sequence[] = {
|
||||||
0x0001, 0xcca1, 0x0000, 0x0001, 0xcca2, 0x0000, 0x0001, 0xcca3, 0x0000,
|
0x0001, 0xcca1, 0x0000, 0x0001, 0xcca2, 0x0000, 0x0001, 0xcca3, 0x0000,
|
||||||
0x0001, 0xcca4, 0x0000, 0x0001, 0xcca5, 0x0000, 0x0001, 0xcca6, 0x0000,
|
0x0001, 0xcca4, 0x0000, 0x0001, 0xcca5, 0x0000, 0x0001, 0xcca6, 0x0000,
|
||||||
0x0001, 0xcca7, 0x0000, 0x0001, 0xcca8, 0x0000, 0x0001, 0xcca9, 0x0000,
|
0x0001, 0xcca7, 0x0000, 0x0001, 0xcca8, 0x0000, 0x0001, 0xcca9, 0x0000,
|
||||||
|
0x0001, 0x3a00, 0x0057
|
||||||
};
|
};
|
||||||
|
|
||||||
otm_ret_t _otm_lcd_init_seq(otm_t *lcd) {
|
otm_ret_t _otm_lcd_init_seq(otm_t *lcd) {
|
||||||
uint16_t i = 0;
|
uint16_t i = 0;
|
||||||
while(i < (sizeof(OTM_PANEL_SELECTION) / sizeof(otm_data_t))) {
|
while(i < (sizeof(OTM_PANEL_SELECTION) / sizeof(otm_data_t))) {
|
||||||
OLED_ERROR_CHECK(lcd->cb.write_cmd_cb(lcd->user_data, &OTM_PANEL_SELECTION[i + 1], OTM_PANEL_SELECTION[i] + 1));
|
OTM_ERROR_CHECK(lcd->cb.write_reg_cb(lcd->user_data, &OTM_PANEL_SELECTION[i + 1], OTM_PANEL_SELECTION[i] + 1));
|
||||||
i += OTM_PANEL_SELECTION[i] + 2;
|
i += OTM_PANEL_SELECTION[i] + 2;
|
||||||
}
|
}
|
||||||
return OTM_OK;
|
return OTM_OK;
|
||||||
}
|
}
|
||||||
|
|
||||||
otm_ret_t otm_lcd_init(otm_t *lcd) {
|
otm_ret_t _otm_lcd_sleep(otm_t *lcd, uint8_t sleep) {
|
||||||
|
uint16_t reg = sleep ? 0x1000 : 0x1100; // SLPIN : SLPOUT
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.write_reg_cb(lcd->user_data, ®, 0x01));
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.delay_cb(lcd->user_data, 10000)); // 5ms delay.
|
||||||
|
|
||||||
|
return OTM_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
otm_ret_t _otm_lcd_window(otm_t *lcd, uint16_t x_start, uint16_t x_end, uint16_t y_start, uint16_t y_end) {
|
||||||
|
uint16_t reg[] = { 0x2A00, x_start >> 0x08U };
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.write_reg_cb(lcd->user_data, reg, 0x02));
|
||||||
|
reg[0] = 0x2A01; reg[1] = x_start & 0xFFU;
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.write_reg_cb(lcd->user_data, reg, 0x02));
|
||||||
|
reg[0] = 0x2A02; reg[1] = x_end >> 0x08U;
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.write_reg_cb(lcd->user_data, reg, 0x02));
|
||||||
|
reg[0] = 0x2A03; reg[1] = x_end & 0xFFU;
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.write_reg_cb(lcd->user_data, reg, 0x02));
|
||||||
|
reg[0] = 0x2B00; reg[1] = y_start >> 0x08U;
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.write_reg_cb(lcd->user_data, reg, 0x02));
|
||||||
|
reg[0] = 0x2B01; reg[1] = y_start & 0xFFU;
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.write_reg_cb(lcd->user_data, reg, 0x02));
|
||||||
|
reg[0] = 0x2B02; reg[1] = y_end >> 0x08U;
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.write_reg_cb(lcd->user_data, reg, 0x02));
|
||||||
|
reg[0] = 0x2B03; reg[1] = y_end & 0xFFU;
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.write_reg_cb(lcd->user_data, reg, 0x02));
|
||||||
|
|
||||||
|
return OTM_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
otm_ret_t otm_lcd_init(otm_t *lcd) {
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.delay_cb(lcd, 100000)); //50ms
|
||||||
|
OTM_ERROR_CHECK(_otm_lcd_init_seq(lcd));
|
||||||
|
OTM_ERROR_CHECK(_otm_lcd_sleep(lcd, 0));
|
||||||
|
OTM_ERROR_CHECK(otm_lcd_display(lcd, 1));
|
||||||
|
|
||||||
|
return OTM_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
otm_ret_t otm_lcd_display(otm_t *lcd, uint8_t on) {
|
||||||
|
uint16_t reg = on ? 0x2900 : 0x2800; // DISPON : DISPOFF
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.write_reg_cb(lcd->user_data, ®, 0x01));
|
||||||
|
|
||||||
|
return OTM_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
otm_ret_t otm_lcd_upload(otm_t *lcd, uint16_t x1, uint16_t x2, uint16_t y1, uint16_t y2, uint16_t *data) {
|
||||||
|
OTM_ERROR_CHECK(_otm_lcd_window(lcd, x1, x2, y1, y2));
|
||||||
|
|
||||||
|
uint32_t pixels = (y2 - y1 + 1) * (x2 - x1 + 1);
|
||||||
|
|
||||||
|
uint16_t reg = 0x2C00;
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.write_reg_cb(lcd->user_data, ®, 0x01));
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.write_data_cb(lcd->user_data, data, pixels * 2));
|
||||||
|
|
||||||
|
return OTM_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
otm_ret_t otm_lcd_direction(otm_t *lcd, otm_direction_t direction) {
|
||||||
|
uint16_t reg[] = { 0x3600, (1U << 5U) | (1U << 6U) };
|
||||||
|
switch(direction) {
|
||||||
|
case OTM_HORIZONTAL_INV:
|
||||||
|
reg[1] = (1U << 7U) | (1U << 5U);
|
||||||
|
break;
|
||||||
|
case OTM_HORIZONTAL:
|
||||||
|
default:
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
OTM_ERROR_CHECK(lcd->cb.write_reg_cb(lcd->user_data, reg, 0x02));
|
||||||
|
lcd->direction = direction;
|
||||||
|
|
||||||
|
return OTM_OK;
|
||||||
}
|
}
|
|
@ -0,0 +1,29 @@
|
||||||
|
#include "stm32h7xx_hal.h"
|
||||||
|
|
||||||
|
#include "otm_lcd_impl.h"
|
||||||
|
|
||||||
|
#define LCD_REGISTER_ADDR 0x60000000
|
||||||
|
#define LCD_DATA_ADDR 0x60020000
|
||||||
|
|
||||||
|
otm_ret_t _otm_impl_write_reg(void *handle, otm_data_t *reg, uint8_t len) {
|
||||||
|
*(uint16_t *)LCD_REGISTER_ADDR = *reg;
|
||||||
|
for(uint8_t i = 1; i < len; i++) {
|
||||||
|
*(uint16_t *)LCD_DATA_ADDR = reg[i];
|
||||||
|
}
|
||||||
|
|
||||||
|
return OTM_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
otm_ret_t _otm_impl_write_data(void *handle, otm_data_t *data, uint32_t len) {
|
||||||
|
for(uint32_t i = 0; i < len; i++){
|
||||||
|
*(uint16_t *)LCD_DATA_ADDR = data[i];
|
||||||
|
}
|
||||||
|
|
||||||
|
return OTM_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
otm_ret_t _otm_impl_delay(void *handle, uint32_t usec) {
|
||||||
|
HAL_Delay(usec / 1000);
|
||||||
|
|
||||||
|
return OTM_OK;
|
||||||
|
}
|
|
@ -71,6 +71,23 @@ void HAL_MspInit(void)
|
||||||
|
|
||||||
/* System interrupt init*/
|
/* System interrupt init*/
|
||||||
|
|
||||||
|
/* Peripheral interrupt init */
|
||||||
|
/* PVD_AVD_IRQn interrupt configuration */
|
||||||
|
HAL_NVIC_SetPriority(PVD_AVD_IRQn, 0, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(PVD_AVD_IRQn);
|
||||||
|
/* FLASH_IRQn interrupt configuration */
|
||||||
|
HAL_NVIC_SetPriority(FLASH_IRQn, 0, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(FLASH_IRQn);
|
||||||
|
/* RCC_IRQn interrupt configuration */
|
||||||
|
HAL_NVIC_SetPriority(RCC_IRQn, 0, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(RCC_IRQn);
|
||||||
|
/* FPU_IRQn interrupt configuration */
|
||||||
|
HAL_NVIC_SetPriority(FPU_IRQn, 0, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(FPU_IRQn);
|
||||||
|
/* HSEM1_IRQn interrupt configuration */
|
||||||
|
HAL_NVIC_SetPriority(HSEM1_IRQn, 0, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(HSEM1_IRQn);
|
||||||
|
|
||||||
/* USER CODE BEGIN MspInit 1 */
|
/* USER CODE BEGIN MspInit 1 */
|
||||||
|
|
||||||
/* USER CODE END MspInit 1 */
|
/* USER CODE END MspInit 1 */
|
||||||
|
@ -133,6 +150,9 @@ void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi)
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI;
|
GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI;
|
||||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* QUADSPI interrupt Init */
|
||||||
|
HAL_NVIC_SetPriority(QUADSPI_IRQn, 0, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(QUADSPI_IRQn);
|
||||||
/* USER CODE BEGIN QUADSPI_MspInit 1 */
|
/* USER CODE BEGIN QUADSPI_MspInit 1 */
|
||||||
|
|
||||||
/* USER CODE END QUADSPI_MspInit 1 */
|
/* USER CODE END QUADSPI_MspInit 1 */
|
||||||
|
@ -172,6 +192,8 @@ void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi)
|
||||||
|
|
||||||
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_9|GPIO_PIN_10);
|
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_9|GPIO_PIN_10);
|
||||||
|
|
||||||
|
/* QUADSPI interrupt DeInit */
|
||||||
|
HAL_NVIC_DisableIRQ(QUADSPI_IRQn);
|
||||||
/* USER CODE BEGIN QUADSPI_MspDeInit 1 */
|
/* USER CODE BEGIN QUADSPI_MspDeInit 1 */
|
||||||
|
|
||||||
/* USER CODE END QUADSPI_MspDeInit 1 */
|
/* USER CODE END QUADSPI_MspDeInit 1 */
|
||||||
|
|
|
@ -56,7 +56,7 @@
|
||||||
/* USER CODE END 0 */
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
/* External variables --------------------------------------------------------*/
|
/* External variables --------------------------------------------------------*/
|
||||||
|
extern QSPI_HandleTypeDef hqspi;
|
||||||
/* USER CODE BEGIN EV */
|
/* USER CODE BEGIN EV */
|
||||||
|
|
||||||
/* USER CODE END EV */
|
/* USER CODE END EV */
|
||||||
|
@ -200,6 +200,88 @@ void SysTick_Handler(void)
|
||||||
/* please refer to the startup file (startup_stm32h7xx.s). */
|
/* please refer to the startup file (startup_stm32h7xx.s). */
|
||||||
/******************************************************************************/
|
/******************************************************************************/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles PVD and AVD interrupts through EXTI line 16.
|
||||||
|
*/
|
||||||
|
void PVD_AVD_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN PVD_AVD_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END PVD_AVD_IRQn 0 */
|
||||||
|
HAL_PWREx_PVD_AVD_IRQHandler();
|
||||||
|
/* USER CODE BEGIN PVD_AVD_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END PVD_AVD_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles Flash global interrupt.
|
||||||
|
*/
|
||||||
|
void FLASH_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN FLASH_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END FLASH_IRQn 0 */
|
||||||
|
HAL_FLASH_IRQHandler();
|
||||||
|
/* USER CODE BEGIN FLASH_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END FLASH_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles RCC global interrupt.
|
||||||
|
*/
|
||||||
|
void RCC_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN RCC_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END RCC_IRQn 0 */
|
||||||
|
/* USER CODE BEGIN RCC_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END RCC_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles FPU global interrupt.
|
||||||
|
*/
|
||||||
|
void FPU_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN FPU_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END FPU_IRQn 0 */
|
||||||
|
/* USER CODE BEGIN FPU_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END FPU_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles QUADSPI global interrupt.
|
||||||
|
*/
|
||||||
|
void QUADSPI_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN QUADSPI_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END QUADSPI_IRQn 0 */
|
||||||
|
HAL_QSPI_IRQHandler(&hqspi);
|
||||||
|
/* USER CODE BEGIN QUADSPI_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END QUADSPI_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles HSEM1 global interrupt.
|
||||||
|
*/
|
||||||
|
void HSEM1_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HSEM1_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END HSEM1_IRQn 0 */
|
||||||
|
HAL_HSEM_IRQHandler();
|
||||||
|
/* USER CODE BEGIN HSEM1_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END HSEM1_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
/* USER CODE BEGIN 1 */
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
/* USER CODE END 1 */
|
/* USER CODE END 1 */
|
||||||
|
|
4
Makefile
4
Makefile
|
@ -1,5 +1,5 @@
|
||||||
##########################################################################################################################
|
##########################################################################################################################
|
||||||
# File automatically-generated by tool: [projectgenerator] version: [3.11.2] date: [Thu Jan 28 01:56:49 CST 2021]
|
# File automatically-generated by tool: [projectgenerator] version: [3.11.2] date: [Thu Jan 28 22:34:22 CST 2021]
|
||||||
##########################################################################################################################
|
##########################################################################################################################
|
||||||
|
|
||||||
# ------------------------------------------------
|
# ------------------------------------------------
|
||||||
|
@ -39,6 +39,8 @@ C_SOURCES = \
|
||||||
Core/Src/main.c \
|
Core/Src/main.c \
|
||||||
Core/Src/stm32h7xx_it.c \
|
Core/Src/stm32h7xx_it.c \
|
||||||
Core/Src/stm32h7xx_hal_msp.c \
|
Core/Src/stm32h7xx_hal_msp.c \
|
||||||
|
Core/Src/otm8009a_lcd.c \
|
||||||
|
Core/Src/otm_lcd_impl.c \
|
||||||
Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c \
|
Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c \
|
||||||
Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_fmc.c \
|
Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_fmc.c \
|
||||||
Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c \
|
Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c \
|
||||||
|
|
|
@ -1,10 +1,12 @@
|
||||||
#MicroXplorer Configuration settings - do not modify
|
#MicroXplorer Configuration settings - do not modify
|
||||||
Mcu.Family=STM32H7
|
Mcu.Family=STM32H7
|
||||||
|
NVIC.FLASH_IRQn=true\:0\:0\:false\:false\:true\:true\:true
|
||||||
RCC.DIVQ2Freq_Value=16125000
|
RCC.DIVQ2Freq_Value=16125000
|
||||||
ProjectManager.MainLocation=Core/Src
|
ProjectManager.MainLocation=Core/Src
|
||||||
SH.FMC_D7_DA7.0=FMC_D7,16b-d1
|
SH.FMC_D7_DA7.0=FMC_D7,16b-d1
|
||||||
SH.FMC_D0_DA0.ConfNb=1
|
SH.FMC_D0_DA0.ConfNb=1
|
||||||
RCC.SAI1Freq_Value=168000000
|
CORTEX_M7.DisableExec-Cortex_Memory_Protection_Unit_Region4_Settings=MPU_INSTRUCTION_ACCESS_DISABLE
|
||||||
|
RCC.SAI1Freq_Value=84000000
|
||||||
RCC.CortexFreq_Value=168000000
|
RCC.CortexFreq_Value=168000000
|
||||||
SH.FMC_D6_DA6.ConfNb=1
|
SH.FMC_D6_DA6.ConfNb=1
|
||||||
SH.FMC_D9_DA9.ConfNb=1
|
SH.FMC_D9_DA9.ConfNb=1
|
||||||
|
@ -18,7 +20,7 @@ PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
|
||||||
PC10.Locked=true
|
PC10.Locked=true
|
||||||
PC10.Signal=QUADSPI_BK1_IO1
|
PC10.Signal=QUADSPI_BK1_IO1
|
||||||
PC15-OSC32_OUT\ (OSC32_OUT).Mode=LSE-External-Oscillator
|
PC15-OSC32_OUT\ (OSC32_OUT).Mode=LSE-External-Oscillator
|
||||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,4-MX_FMC_Init-FMC-false-HAL-true,5-MX_QUADSPI_Init-QUADSPI-false-HAL-true,6-MX_RTC_Init-RTC-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true
|
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_FMC_Init-FMC-false-HAL-true,4-MX_QUADSPI_Init-QUADSPI-false-HAL-true,5-MX_RTC_Init-RTC-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true
|
||||||
SH.FMC_D6_DA6.0=FMC_D6,16b-d1
|
SH.FMC_D6_DA6.0=FMC_D6,16b-d1
|
||||||
VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
|
VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
|
||||||
RCC.RTCFreq_Value=32000
|
RCC.RTCFreq_Value=32000
|
||||||
|
@ -27,6 +29,7 @@ CORTEX_M7.AccessPermission-Cortex_Memory_Protection_Unit_Region2_Settings=MPU_RE
|
||||||
VP_RTC_VS_RTC_Calendar.Signal=RTC_VS_RTC_Calendar
|
VP_RTC_VS_RTC_Calendar.Signal=RTC_VS_RTC_Calendar
|
||||||
RCC.CpuClockFreq_Value=168000000
|
RCC.CpuClockFreq_Value=168000000
|
||||||
RCC.VCO2OutputFreq_Value=32250000
|
RCC.VCO2OutputFreq_Value=32250000
|
||||||
|
CORTEX_M7.IsShareable-Cortex_Memory_Protection_Unit_Region4_Settings=MPU_ACCESS_SHAREABLE
|
||||||
SH.FMC_D5_DA5.0=FMC_D5,16b-d1
|
SH.FMC_D5_DA5.0=FMC_D5,16b-d1
|
||||||
SH.FMC_NOE.ConfNb=1
|
SH.FMC_NOE.ConfNb=1
|
||||||
PinOutPanel.RotationAngle=0
|
PinOutPanel.RotationAngle=0
|
||||||
|
@ -51,7 +54,7 @@ Mcu.IP1=FMC
|
||||||
CORTEX_M7.IsBufferable-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_ACCESS_BUFFERABLE
|
CORTEX_M7.IsBufferable-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_ACCESS_BUFFERABLE
|
||||||
Mcu.UserConstants=
|
Mcu.UserConstants=
|
||||||
RCC.DIVP3Freq_Value=16125000
|
RCC.DIVP3Freq_Value=16125000
|
||||||
RCC.SDMMCFreq_Value=168000000
|
RCC.SDMMCFreq_Value=84000000
|
||||||
Mcu.ThirdPartyNb=0
|
Mcu.ThirdPartyNb=0
|
||||||
SH.FMC_D11_DA11.0=FMC_D11,16b-d1
|
SH.FMC_D11_DA11.0=FMC_D11,16b-d1
|
||||||
RCC.HCLKFreq_Value=84000000
|
RCC.HCLKFreq_Value=84000000
|
||||||
|
@ -61,17 +64,17 @@ Mcu.IPNb=7
|
||||||
ProjectManager.PreviousToolchain=
|
ProjectManager.PreviousToolchain=
|
||||||
PD4.Signal=FMC_NOE
|
PD4.Signal=FMC_NOE
|
||||||
SH.FMC_NWE.ConfNb=1
|
SH.FMC_NWE.ConfNb=1
|
||||||
RCC.SPDIFRXFreq_Value=168000000
|
RCC.SPDIFRXFreq_Value=84000000
|
||||||
SH.FMC_D10_DA10.ConfNb=1
|
SH.FMC_D10_DA10.ConfNb=1
|
||||||
PC7.Signal=FMC_NE1
|
PC7.Signal=FMC_NE1
|
||||||
CORTEX_M7.TypeExtField-Cortex_Memory_Protection_Unit_Region3_Settings=MPU_TEX_LEVEL1
|
CORTEX_M7.TypeExtField-Cortex_Memory_Protection_Unit_Region3_Settings=MPU_TEX_LEVEL1
|
||||||
RCC.DIVQ3Freq_Value=16125000
|
RCC.DIVQ3Freq_Value=16125000
|
||||||
Mcu.Pin6=PB2
|
Mcu.Pin6=PB1
|
||||||
PD0.Signal=FMC_D2_DA2
|
PD0.Signal=FMC_D2_DA2
|
||||||
Mcu.Pin7=PE7
|
Mcu.Pin7=PB2
|
||||||
PD8.Signal=FMC_D13_DA13
|
PD8.Signal=FMC_D13_DA13
|
||||||
Mcu.Pin8=PE8
|
Mcu.Pin8=PE7
|
||||||
Mcu.Pin9=PE9
|
Mcu.Pin9=PE8
|
||||||
Mcu.Pin0=PE2
|
Mcu.Pin0=PE2
|
||||||
Mcu.Pin1=PC14-OSC32_IN (OSC32_IN)
|
Mcu.Pin1=PC14-OSC32_IN (OSC32_IN)
|
||||||
GPIO.groupedBy=
|
GPIO.groupedBy=
|
||||||
|
@ -101,6 +104,7 @@ PE13.Signal=FMC_D10_DA10
|
||||||
ProjectManager.BackupPrevious=false
|
ProjectManager.BackupPrevious=false
|
||||||
RCC.FMCFreq_Value=84000000
|
RCC.FMCFreq_Value=84000000
|
||||||
PE9.Signal=FMC_D6_DA6
|
PE9.Signal=FMC_D6_DA6
|
||||||
|
PB1.GPIO_Label=LCD_BL
|
||||||
SH.FMC_D15_DA15.ConfNb=1
|
SH.FMC_D15_DA15.ConfNb=1
|
||||||
RCC.USART16Freq_Value=84000000
|
RCC.USART16Freq_Value=84000000
|
||||||
File.Version=6
|
File.Version=6
|
||||||
|
@ -110,6 +114,7 @@ PE2.Signal=QUADSPI_BK1_IO2
|
||||||
SH.FMC_D2_DA2.ConfNb=1
|
SH.FMC_D2_DA2.ConfNb=1
|
||||||
SH.FMC_D1_DA1.0=FMC_D1,16b-d1
|
SH.FMC_D1_DA1.0=FMC_D1,16b-d1
|
||||||
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
CORTEX_M7.Size-Cortex_Memory_Protection_Unit_Region4_Settings=MPU_REGION_SIZE_256MB
|
||||||
RCC.DIVR2Freq_Value=16125000
|
RCC.DIVR2Freq_Value=16125000
|
||||||
PE10.Signal=FMC_D7_DA7
|
PE10.Signal=FMC_D7_DA7
|
||||||
CORTEX_M7.DisableExec-Cortex_Memory_Protection_Unit_Region0_Settings=MPU_INSTRUCTION_ACCESS_DISABLE
|
CORTEX_M7.DisableExec-Cortex_Memory_Protection_Unit_Region0_Settings=MPU_INSTRUCTION_ACCESS_DISABLE
|
||||||
|
@ -117,8 +122,10 @@ ProjectManager.HalAssertFull=false
|
||||||
RCC.DIVP2Freq_Value=16125000
|
RCC.DIVP2Freq_Value=16125000
|
||||||
ProjectManager.ProjectName=STM32H750_LCD
|
ProjectManager.ProjectName=STM32H750_LCD
|
||||||
RCC.APB3Freq_Value=84000000
|
RCC.APB3Freq_Value=84000000
|
||||||
|
PB1.PinState=GPIO_PIN_SET
|
||||||
RCC.MCO2PinFreq_Value=168000000
|
RCC.MCO2PinFreq_Value=168000000
|
||||||
Mcu.Package=LQFP100
|
Mcu.Package=LQFP100
|
||||||
|
PB1.Signal=GPIO_Output
|
||||||
SH.FMC_D0_DA0.0=FMC_D0,16b-d1
|
SH.FMC_D0_DA0.0=FMC_D0,16b-d1
|
||||||
CORTEX_M7.BaseAddress-Cortex_Memory_Protection_Unit_Region1_Settings=0x90000000
|
CORTEX_M7.BaseAddress-Cortex_Memory_Protection_Unit_Region1_Settings=0x90000000
|
||||||
RCC.EnbaleCSS=true
|
RCC.EnbaleCSS=true
|
||||||
|
@ -126,6 +133,7 @@ SH.FMC_D4_DA4.ConfNb=1
|
||||||
ProjectManager.ToolChainLocation=
|
ProjectManager.ToolChainLocation=
|
||||||
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
|
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
|
||||||
VP_RTC_VS_RTC_Calendar.Mode=RTC_Calendar
|
VP_RTC_VS_RTC_Calendar.Mode=RTC_Calendar
|
||||||
|
CORTEX_M7.BaseAddress-Cortex_Memory_Protection_Unit_Region4_Settings=0x60000000
|
||||||
SH.FMC_D4_DA4.0=FMC_D4,16b-d1
|
SH.FMC_D4_DA4.0=FMC_D4,16b-d1
|
||||||
RCC.DFSDMFreq_Value=84000000
|
RCC.DFSDMFreq_Value=84000000
|
||||||
RCC.DIVR1Freq_Value=168000000
|
RCC.DIVR1Freq_Value=168000000
|
||||||
|
@ -134,7 +142,7 @@ PC14-OSC32_IN\ (OSC32_IN).Mode=LSE-External-Oscillator
|
||||||
RCC.TraceFreq_Value=64000000
|
RCC.TraceFreq_Value=64000000
|
||||||
RCC.APB4Freq_Value=84000000
|
RCC.APB4Freq_Value=84000000
|
||||||
RCC.CECFreq_Value=32000
|
RCC.CECFreq_Value=32000
|
||||||
RCC.SAI23Freq_Value=168000000
|
RCC.SAI23Freq_Value=84000000
|
||||||
CORTEX_M7.Enable-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_REGION_ENABLE
|
CORTEX_M7.Enable-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_REGION_ENABLE
|
||||||
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
RCC.LPUART1Freq_Value=84000000
|
RCC.LPUART1Freq_Value=84000000
|
||||||
|
@ -145,21 +153,25 @@ PD15.Signal=FMC_D1_DA1
|
||||||
SH.FMC_D3_DA3.0=FMC_D3,16b-d1
|
SH.FMC_D3_DA3.0=FMC_D3,16b-d1
|
||||||
ProjectManager.CustomerFirmwarePackage=
|
ProjectManager.CustomerFirmwarePackage=
|
||||||
RCC.Tim2OutputFreq_Value=84000000
|
RCC.Tim2OutputFreq_Value=84000000
|
||||||
RCC.DFSDMACLkFreq_Value=168000000
|
NVIC.RCC_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
||||||
|
RCC.DFSDMACLkFreq_Value=84000000
|
||||||
RCC.VCO3OutputFreq_Value=32250000
|
RCC.VCO3OutputFreq_Value=32250000
|
||||||
SH.FMC_D3_DA3.ConfNb=1
|
SH.FMC_D3_DA3.ConfNb=1
|
||||||
VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
|
VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
|
||||||
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
|
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
|
||||||
CORTEX_M7.AccessPermission-Cortex_Memory_Protection_Unit_Region3_Settings=MPU_REGION_FULL_ACCESS
|
CORTEX_M7.AccessPermission-Cortex_Memory_Protection_Unit_Region3_Settings=MPU_REGION_FULL_ACCESS
|
||||||
|
NVIC.QUADSPI_IRQn=true\:0\:0\:false\:false\:true\:true\:true
|
||||||
ProjectManager.ProjectFileName=STM32H750_LCD.ioc
|
ProjectManager.ProjectFileName=STM32H750_LCD.ioc
|
||||||
CORTEX_M7.CPU_ICache=Enabled
|
CORTEX_M7.CPU_ICache=Enabled
|
||||||
Mcu.PinsNb=33
|
RCC.DIVQ1=4
|
||||||
|
Mcu.PinsNb=34
|
||||||
ProjectManager.NoMain=false
|
ProjectManager.NoMain=false
|
||||||
CORTEX_M7.IsShareable-Cortex_Memory_Protection_Unit_Region3_Settings=MPU_ACCESS_SHAREABLE
|
CORTEX_M7.IsShareable-Cortex_Memory_Protection_Unit_Region3_Settings=MPU_ACCESS_SHAREABLE
|
||||||
SH.FMC_D10_DA10.0=FMC_D10,16b-d1
|
SH.FMC_D10_DA10.0=FMC_D10,16b-d1
|
||||||
CORTEX_M7.IsBufferable-Cortex_Memory_Protection_Unit_Region2_Settings=MPU_ACCESS_BUFFERABLE
|
CORTEX_M7.IsBufferable-Cortex_Memory_Protection_Unit_Region2_Settings=MPU_ACCESS_BUFFERABLE
|
||||||
RCC.SWPMI1Freq_Value=84000000
|
RCC.SWPMI1Freq_Value=84000000
|
||||||
RCC.SAI4BFreq_Value=168000000
|
CORTEX_M7.Enable-Cortex_Memory_Protection_Unit_Region4_Settings=MPU_REGION_ENABLE
|
||||||
|
RCC.SAI4BFreq_Value=84000000
|
||||||
PC10.Mode=Single Bank 1
|
PC10.Mode=Single Bank 1
|
||||||
PD1.Signal=FMC_D3_DA3
|
PD1.Signal=FMC_D3_DA3
|
||||||
ProjectManager.DefaultFWLocation=true
|
ProjectManager.DefaultFWLocation=true
|
||||||
|
@ -177,9 +189,10 @@ PD10.Signal=FMC_D15_DA15
|
||||||
RCC.D1CPREFreq_Value=168000000
|
RCC.D1CPREFreq_Value=168000000
|
||||||
CORTEX_M7.MPU_Control=MPU_HFNMI_PRIVDEF_NONE
|
CORTEX_M7.MPU_Control=MPU_HFNMI_PRIVDEF_NONE
|
||||||
RCC.USART234578Freq_Value=84000000
|
RCC.USART234578Freq_Value=84000000
|
||||||
RCC.Tim1OutputFreq_Value=84000000
|
|
||||||
RCC.SPI45Freq_Value=84000000
|
RCC.SPI45Freq_Value=84000000
|
||||||
RCC.SPI123Freq_Value=168000000
|
RCC.Tim1OutputFreq_Value=84000000
|
||||||
|
RCC.SPI123Freq_Value=84000000
|
||||||
|
CORTEX_M7.IsBufferable-Cortex_Memory_Protection_Unit_Region4_Settings=MPU_ACCESS_BUFFERABLE
|
||||||
ProjectManager.TargetToolchain=Makefile
|
ProjectManager.TargetToolchain=Makefile
|
||||||
PC15-OSC32_OUT\ (OSC32_OUT).Signal=RCC_OSC32_OUT
|
PC15-OSC32_OUT\ (OSC32_OUT).Signal=RCC_OSC32_OUT
|
||||||
CORTEX_M7.TypeExtField-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_TEX_LEVEL1
|
CORTEX_M7.TypeExtField-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_TEX_LEVEL1
|
||||||
|
@ -193,11 +206,13 @@ CORTEX_M7.IsCacheable-Cortex_Memory_Protection_Unit_Region3_Settings=MPU_ACCESS_
|
||||||
RCC.DIVN1=336
|
RCC.DIVN1=336
|
||||||
CORTEX_M7.DisableExec-Cortex_Memory_Protection_Unit_Region3_Settings=MPU_INSTRUCTION_ACCESS_DISABLE
|
CORTEX_M7.DisableExec-Cortex_Memory_Protection_Unit_Region3_Settings=MPU_INSTRUCTION_ACCESS_DISABLE
|
||||||
ProjectManager.RegisterCallBack=
|
ProjectManager.RegisterCallBack=
|
||||||
RCC.USBFreq_Value=168000000
|
RCC.USBFreq_Value=84000000
|
||||||
PE11.Signal=FMC_D8_DA8
|
PE11.Signal=FMC_D8_DA8
|
||||||
PA1.Signal=QUADSPI_BK1_IO3
|
PA1.Signal=QUADSPI_BK1_IO3
|
||||||
RCC.CKPERFreq_Value=64000000
|
RCC.CKPERFreq_Value=64000000
|
||||||
|
PB1.Locked=true
|
||||||
PB10.Signal=QUADSPI_BK1_NCS
|
PB10.Signal=QUADSPI_BK1_NCS
|
||||||
|
NVIC.PVD_AVD_IRQn=true\:0\:0\:false\:false\:true\:true\:true
|
||||||
CORTEX_M7.Enable-Cortex_Memory_Protection_Unit_Region2_Settings=MPU_REGION_ENABLE
|
CORTEX_M7.Enable-Cortex_Memory_Protection_Unit_Region2_Settings=MPU_REGION_ENABLE
|
||||||
board=custom
|
board=custom
|
||||||
ProjectManager.LastFirmware=true
|
ProjectManager.LastFirmware=true
|
||||||
|
@ -210,45 +225,48 @@ PE15.Signal=FMC_D12_DA12
|
||||||
MxCube.Version=6.1.1
|
MxCube.Version=6.1.1
|
||||||
SH.FMC_D13_DA13.ConfNb=1
|
SH.FMC_D13_DA13.ConfNb=1
|
||||||
PE8.Signal=FMC_D5_DA5
|
PE8.Signal=FMC_D5_DA5
|
||||||
RCC.FDCANFreq_Value=168000000
|
RCC.FMCCLockSelection=RCC_FMCCLKSOURCE_PLL
|
||||||
|
RCC.FDCANFreq_Value=84000000
|
||||||
SH.FMC_D14_DA14.ConfNb=1
|
SH.FMC_D14_DA14.ConfNb=1
|
||||||
RCC.RNGFreq_Value=48000000
|
RCC.RNGFreq_Value=48000000
|
||||||
Mcu.Pin30=VP_RTC_VS_RTC_Activate
|
Mcu.Pin30=PD5
|
||||||
RCC.ADCFreq_Value=16125000
|
RCC.ADCFreq_Value=16125000
|
||||||
VP_SYS_VS_Systick.Mode=SysTick
|
VP_SYS_VS_Systick.Mode=SysTick
|
||||||
|
Mcu.Pin33=VP_SYS_VS_Systick
|
||||||
CORTEX_M7.AccessPermission-Cortex_Memory_Protection_Unit_Region0_Settings=MPU_REGION_FULL_ACCESS
|
CORTEX_M7.AccessPermission-Cortex_Memory_Protection_Unit_Region0_Settings=MPU_REGION_FULL_ACCESS
|
||||||
SH.FMC_D12_DA12.0=FMC_D12,16b-d1
|
SH.FMC_D12_DA12.0=FMC_D12,16b-d1
|
||||||
Mcu.Pin31=VP_RTC_VS_RTC_Calendar
|
Mcu.Pin31=VP_RTC_VS_RTC_Activate
|
||||||
Mcu.Pin32=VP_SYS_VS_Systick
|
Mcu.Pin32=VP_RTC_VS_RTC_Calendar
|
||||||
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:true
|
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:true
|
||||||
|
NVIC.HSEM1_IRQn=true\:0\:0\:false\:false\:true\:true\:true
|
||||||
SH.FMC_D11_DA11.ConfNb=1
|
SH.FMC_D11_DA11.ConfNb=1
|
||||||
ProjectManager.FreePins=false
|
ProjectManager.FreePins=false
|
||||||
RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVN1,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1Freq_Value,DIVQ2Freq_Value,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2Freq_Value,DIVR3Freq_Value,EnbaleCSS,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HPRE,HRTIMFreq_Value,HSE_VALUE,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLLSourceVirtual,QSPICLockSelection,QSPIFreq_Value,RNGFreq_Value,RTCFreq_Value,SAI1Freq_Value,SAI23Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16Freq_Value,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value
|
RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVN1,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1,DIVQ1Freq_Value,DIVQ2Freq_Value,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2Freq_Value,DIVR3Freq_Value,EnbaleCSS,FDCANFreq_Value,FMCCLockSelection,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HPRE,HRTIMFreq_Value,HSE_VALUE,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLLSourceVirtual,QSPICLockSelection,QSPIFreq_Value,RNGFreq_Value,RTCFreq_Value,SAI1Freq_Value,SAI23Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16Freq_Value,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value
|
||||||
ProjectManager.AskForMigrate=true
|
ProjectManager.AskForMigrate=true
|
||||||
Mcu.Name=STM32H750VBTx
|
Mcu.Name=STM32H750VBTx
|
||||||
RCC.LPTIM2Freq_Value=84000000
|
RCC.LPTIM2Freq_Value=84000000
|
||||||
CORTEX_M7.Size-Cortex_Memory_Protection_Unit_Region0_Settings=MPU_REGION_SIZE_4GB
|
CORTEX_M7.Size-Cortex_Memory_Protection_Unit_Region0_Settings=MPU_REGION_SIZE_4GB
|
||||||
PE12.Signal=FMC_D9_DA9
|
PE12.Signal=FMC_D9_DA9
|
||||||
Mcu.Pin26=PD0
|
Mcu.Pin26=PC10
|
||||||
Mcu.Pin27=PD1
|
Mcu.Pin27=PD0
|
||||||
Mcu.Pin24=PC9
|
Mcu.Pin24=PC7
|
||||||
CORTEX_M7.AccessPermission-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_REGION_FULL_ACCESS
|
CORTEX_M7.AccessPermission-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_REGION_FULL_ACCESS
|
||||||
ProjectManager.UnderRoot=false
|
ProjectManager.UnderRoot=false
|
||||||
Mcu.Pin25=PC10
|
Mcu.Pin25=PC9
|
||||||
CORTEX_M7.IsCacheable-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_ACCESS_CACHEABLE
|
CORTEX_M7.IsCacheable-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_ACCESS_CACHEABLE
|
||||||
CORTEX_M7.IPParameters=CPU_ICache,CPU_DCache,MPU_Control,Enable-Cortex_Memory_Protection_Unit_Region0_Settings,Size-Cortex_Memory_Protection_Unit_Region0_Settings,AccessPermission-Cortex_Memory_Protection_Unit_Region0_Settings,Enable-Cortex_Memory_Protection_Unit_Region1_Settings,BaseAddress-Cortex_Memory_Protection_Unit_Region1_Settings,Size-Cortex_Memory_Protection_Unit_Region1_Settings,TypeExtField-Cortex_Memory_Protection_Unit_Region1_Settings,AccessPermission-Cortex_Memory_Protection_Unit_Region1_Settings,IsShareable-Cortex_Memory_Protection_Unit_Region1_Settings,IsCacheable-Cortex_Memory_Protection_Unit_Region1_Settings,IsBufferable-Cortex_Memory_Protection_Unit_Region1_Settings,Enable-Cortex_Memory_Protection_Unit_Region2_Settings,BaseAddress-Cortex_Memory_Protection_Unit_Region2_Settings,Size-Cortex_Memory_Protection_Unit_Region2_Settings,TypeExtField-Cortex_Memory_Protection_Unit_Region2_Settings,AccessPermission-Cortex_Memory_Protection_Unit_Region2_Settings,DisableExec-Cortex_Memory_Protection_Unit_Region2_Settings,IsShareable-Cortex_Memory_Protection_Unit_Region2_Settings,IsCacheable-Cortex_Memory_Protection_Unit_Region2_Settings,IsBufferable-Cortex_Memory_Protection_Unit_Region2_Settings,Enable-Cortex_Memory_Protection_Unit_Region3_Settings,BaseAddress-Cortex_Memory_Protection_Unit_Region3_Settings,Size-Cortex_Memory_Protection_Unit_Region3_Settings,TypeExtField-Cortex_Memory_Protection_Unit_Region3_Settings,AccessPermission-Cortex_Memory_Protection_Unit_Region3_Settings,IsCacheable-Cortex_Memory_Protection_Unit_Region3_Settings,IsBufferable-Cortex_Memory_Protection_Unit_Region3_Settings,DisableExec-Cortex_Memory_Protection_Unit_Region3_Settings,IsShareable-Cortex_Memory_Protection_Unit_Region3_Settings,DisableExec-Cortex_Memory_Protection_Unit_Region0_Settings
|
CORTEX_M7.IPParameters=CPU_ICache,CPU_DCache,MPU_Control,Enable-Cortex_Memory_Protection_Unit_Region0_Settings,Size-Cortex_Memory_Protection_Unit_Region0_Settings,AccessPermission-Cortex_Memory_Protection_Unit_Region0_Settings,Enable-Cortex_Memory_Protection_Unit_Region1_Settings,BaseAddress-Cortex_Memory_Protection_Unit_Region1_Settings,Size-Cortex_Memory_Protection_Unit_Region1_Settings,TypeExtField-Cortex_Memory_Protection_Unit_Region1_Settings,AccessPermission-Cortex_Memory_Protection_Unit_Region1_Settings,IsShareable-Cortex_Memory_Protection_Unit_Region1_Settings,IsCacheable-Cortex_Memory_Protection_Unit_Region1_Settings,IsBufferable-Cortex_Memory_Protection_Unit_Region1_Settings,Enable-Cortex_Memory_Protection_Unit_Region2_Settings,BaseAddress-Cortex_Memory_Protection_Unit_Region2_Settings,Size-Cortex_Memory_Protection_Unit_Region2_Settings,TypeExtField-Cortex_Memory_Protection_Unit_Region2_Settings,AccessPermission-Cortex_Memory_Protection_Unit_Region2_Settings,DisableExec-Cortex_Memory_Protection_Unit_Region2_Settings,IsShareable-Cortex_Memory_Protection_Unit_Region2_Settings,IsCacheable-Cortex_Memory_Protection_Unit_Region2_Settings,IsBufferable-Cortex_Memory_Protection_Unit_Region2_Settings,Enable-Cortex_Memory_Protection_Unit_Region3_Settings,BaseAddress-Cortex_Memory_Protection_Unit_Region3_Settings,Size-Cortex_Memory_Protection_Unit_Region3_Settings,TypeExtField-Cortex_Memory_Protection_Unit_Region3_Settings,AccessPermission-Cortex_Memory_Protection_Unit_Region3_Settings,IsCacheable-Cortex_Memory_Protection_Unit_Region3_Settings,IsBufferable-Cortex_Memory_Protection_Unit_Region3_Settings,DisableExec-Cortex_Memory_Protection_Unit_Region3_Settings,IsShareable-Cortex_Memory_Protection_Unit_Region3_Settings,DisableExec-Cortex_Memory_Protection_Unit_Region0_Settings,Enable-Cortex_Memory_Protection_Unit_Region4_Settings,BaseAddress-Cortex_Memory_Protection_Unit_Region4_Settings,Size-Cortex_Memory_Protection_Unit_Region4_Settings,AccessPermission-Cortex_Memory_Protection_Unit_Region4_Settings,DisableExec-Cortex_Memory_Protection_Unit_Region4_Settings,IsBufferable-Cortex_Memory_Protection_Unit_Region4_Settings,IsShareable-Cortex_Memory_Protection_Unit_Region4_Settings
|
||||||
PD14.Signal=FMC_D0_DA0
|
PD14.Signal=FMC_D0_DA0
|
||||||
Mcu.Pin28=PD4
|
Mcu.Pin28=PD1
|
||||||
Mcu.IP6=SYS
|
Mcu.IP6=SYS
|
||||||
Mcu.Pin29=PD5
|
Mcu.Pin29=PD4
|
||||||
ProjectManager.CoupleFile=false
|
ProjectManager.CoupleFile=false
|
||||||
SH.FMC_D7_DA7.ConfNb=1
|
SH.FMC_D7_DA7.ConfNb=1
|
||||||
RCC.SYSCLKFreq_VALUE=168000000
|
RCC.SYSCLKFreq_VALUE=168000000
|
||||||
Mcu.Pin22=PD15
|
Mcu.Pin22=PD14
|
||||||
RCC.I2C123Freq_Value=84000000
|
RCC.I2C123Freq_Value=84000000
|
||||||
Mcu.Pin23=PC7
|
Mcu.Pin23=PD15
|
||||||
Mcu.Pin20=PD11
|
Mcu.Pin20=PD10
|
||||||
Mcu.Pin21=PD14
|
Mcu.Pin21=PD11
|
||||||
NVIC.ForceEnableDMAVector=true
|
NVIC.ForceEnableDMAVector=true
|
||||||
KeepUserPlacement=false
|
KeepUserPlacement=false
|
||||||
PC14-OSC32_IN\ (OSC32_IN).Signal=RCC_OSC32_IN
|
PC14-OSC32_IN\ (OSC32_IN).Signal=RCC_OSC32_IN
|
||||||
|
@ -258,26 +276,27 @@ PB2.Mode=Single Bank 1
|
||||||
ProjectManager.CompilerOptimize=6
|
ProjectManager.CompilerOptimize=6
|
||||||
RCC.QSPICLockSelection=RCC_QSPICLKSOURCE_CLKP
|
RCC.QSPICLockSelection=RCC_QSPICLKSOURCE_CLKP
|
||||||
ProjectManager.HeapSize=0x200
|
ProjectManager.HeapSize=0x200
|
||||||
Mcu.Pin15=PE15
|
Mcu.Pin15=PE14
|
||||||
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
Mcu.Pin16=PB10
|
Mcu.Pin16=PE15
|
||||||
Mcu.Pin13=PE13
|
Mcu.Pin13=PE12
|
||||||
Mcu.Pin14=PE14
|
Mcu.Pin14=PE13
|
||||||
CORTEX_M7.Enable-Cortex_Memory_Protection_Unit_Region3_Settings=MPU_REGION_ENABLE
|
CORTEX_M7.Enable-Cortex_Memory_Protection_Unit_Region3_Settings=MPU_REGION_ENABLE
|
||||||
Mcu.Pin19=PD10
|
Mcu.Pin19=PD9
|
||||||
CORTEX_M7.Size-Cortex_Memory_Protection_Unit_Region3_Settings=MPU_REGION_SIZE_512KB
|
CORTEX_M7.Size-Cortex_Memory_Protection_Unit_Region3_Settings=MPU_REGION_SIZE_512KB
|
||||||
RCC.LPTIM345Freq_Value=84000000
|
RCC.LPTIM345Freq_Value=84000000
|
||||||
ProjectManager.ComputerToolchain=false
|
ProjectManager.ComputerToolchain=false
|
||||||
Mcu.Pin17=PD8
|
Mcu.Pin17=PB10
|
||||||
Mcu.Pin18=PD9
|
Mcu.Pin18=PD8
|
||||||
CORTEX_M7.DisableExec-Cortex_Memory_Protection_Unit_Region2_Settings=MPU_INSTRUCTION_ACCESS_DISABLE
|
CORTEX_M7.DisableExec-Cortex_Memory_Protection_Unit_Region2_Settings=MPU_INSTRUCTION_ACCESS_DISABLE
|
||||||
RCC.LTDCFreq_Value=16125000
|
RCC.LTDCFreq_Value=16125000
|
||||||
RCC.SAI4AFreq_Value=168000000
|
RCC.SAI4AFreq_Value=84000000
|
||||||
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
|
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
|
||||||
Mcu.Pin11=PE11
|
Mcu.Pin11=PE10
|
||||||
Mcu.Pin12=PE12
|
Mcu.Pin12=PE11
|
||||||
Mcu.Pin10=PE10
|
Mcu.Pin10=PE9
|
||||||
RCC.DIVQ1Freq_Value=168000000
|
RCC.DIVQ1Freq_Value=84000000
|
||||||
|
NVIC.FPU_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
||||||
PC9.Signal=QUADSPI_BK1_IO0
|
PC9.Signal=QUADSPI_BK1_IO0
|
||||||
CORTEX_M7.CPU_DCache=Enabled
|
CORTEX_M7.CPU_DCache=Enabled
|
||||||
PC7.Mode=NorPsramChipSelect1_1
|
PC7.Mode=NorPsramChipSelect1_1
|
||||||
|
@ -286,5 +305,7 @@ RCC.HCLK3ClockFreq_Value=84000000
|
||||||
SH.FMC_D8_DA8.ConfNb=1
|
SH.FMC_D8_DA8.ConfNb=1
|
||||||
RCC.VCOInput2Freq_Value=250000
|
RCC.VCOInput2Freq_Value=250000
|
||||||
RCC.APB1Freq_Value=84000000
|
RCC.APB1Freq_Value=84000000
|
||||||
|
CORTEX_M7.AccessPermission-Cortex_Memory_Protection_Unit_Region4_Settings=MPU_REGION_FULL_ACCESS
|
||||||
ProjectManager.DeviceId=STM32H750VBTx
|
ProjectManager.DeviceId=STM32H750VBTx
|
||||||
ProjectManager.LibraryCopy=0
|
ProjectManager.LibraryCopy=0
|
||||||
|
PB1.GPIOParameters=PinState,GPIO_Label
|
||||||
|
|
|
@ -0,0 +1,7 @@
|
||||||
|
source /home/imi415/Documents/Conf/OpenOCD/interface/ft232-swd.cfg
|
||||||
|
|
||||||
|
source [find target/stm32h7x.cfg]
|
||||||
|
|
||||||
|
reset_config none
|
||||||
|
cortex_m reset_config sysresetreq
|
||||||
|
gdb_breakpoint_override hw
|
Loading…
Reference in New Issue