Do not split in multiple lines the calls to register_commands*().
No change in code behaviour, just make it easy to grep in the code
and identify the commands that can be registered.
This would help detecting undocumented commands.
Change-Id: Id654e107cdabf7ee31fc3d227c1d2a59acc5669e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6716
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Ignore ack received after DP_TARGETSEL write to prevent false error.
This change also fixes a bug:
Received ACK FAULT or JUNK value were incorrectly stored to queued_retval
and later used as bitbang_swd_run_queue() error return.
Use LOG_ERROR for parity mismatch.
Change-Id: I5ff1f658f221af78d8bbec8416a7a0fc64ba2550
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6700
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Ignore ack received after DP_TARGETSEL write to prevent false error.
Inspired by Graham Sanderson's http://review.openocd.org/4935
Change-Id: I04fd77cde3244de250743d8c8bfb93ed26379385
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6698
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
According to ARM IHI0031C+ chapter 2.3.11 "TARGETSEL, Target Selection register"
multidrop capable DPv2 must not drive SWDIO line during the response phase
of a write to TARGETSEL register.
Introduce helper functions swd_cmd_returns_ack() and swd_ack_to_error_code()
to centralize these tests from all drivers to one place.
Introduce distinct error codes for SWD protocol.
Partly inspired by Graham Sanderson's http://review.openocd.org/4935
Change-Id: Ie5f9edb22e066a933a534bf2b29e7e1d3087dad1
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6699
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
hla_layout.h uses explicitly tpiu_pin_protocol enum defined in
arm_tpiu_swo.h.
To make this header file consistent, add the missing include.
Change-Id: Ibecc279da8d6859ced2b8377e812554c747d81bb
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6687
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Added "jtag_vpi:" prefixes to log messages from the jtag_vpi
driver. The intention is to make it clear what the messages
relate to. Without the prefix, many of the log messages
won't make much sense to the user.
This change does not alter any functionality, just
the printed text.
Example:
Before:
Error: Can't connect to 127.0.0.1 : 5555
After:
Error: jtag_vpi: Can't connect to 127.0.0.1 : 5555
Change-Id: I779c379f52722b094b200d08b25ab0f7280d2845
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6686
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
While there, replace the SWD_CMD_PARK macro to the magic number.
Change-Id: Id9094dcb2b010b9e894a5ed9e4a99d2287e5969c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6691
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
detected in ubuntu 20.04
sometimes, the stlink-server response could be segmented on multiple
packets.
this causes stlink_tcp_send_cmd to fail with the following msg:
Error: failed to receive USB CMD response
because the received_size < expected size
to fix the issue, do recv in a loop till all data is received
or timeout is reached.
Change-Id: I46cc60c231b4cc52f150ead268f843bc60c41149
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6671
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
At exit, free the memory allocated to hold the USB location.
Change-Id: I050701f4dc8be14fd40e8add9d0b047461fa0d1c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6646
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
The only purpose of include file driver.h was to expose the API
to register the adapter's commands.
Move the prototype in adapter.h, already used by openocd.c.
Change-Id: Ie1090c60ef9e5bac5ea187c87bed6e7b08d9671c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6645
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
After moved the code, align the include files.
Change-Id: I514a3020648816810d69f76c2ec4f6e52a1c57ab
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6643
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Move the static variables used to configure the adapter in
the struct adapter_config.
Change-Id: I1639e2bd39d0cbb12c71dfa347025558879d8b1d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6642
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
The configuration code for adapter parameters is spread around.
Move in adapter.c the code that handles the configuration of
adapter speed.
For convenience, move also the functions adapter_init() and
adapter_quit(), that anyway have no reason to be in file core.c
To simplify the review, the code moved is not modified. It will be
cleaned and adapted in the following changes.
Change-Id: I2b38975a0cd2e74d3d2de6c56ea17818ff225fd8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6641
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
The configuration code for adapter parameters is spread around.
Add a struct in adapter.c aimed at containing all the adapter's
configuration data.
Move in adapter.c the code related to configuring 'usb location'
and the copyright tag.
Add adapter.h to export the functions.
While there:
- rework the copyright and the SPDX tag;
- rename the 'usb location' functions;
- remove the JTAG_SRC variable in Makefile.am.
Change-Id: I4fe0d32991a8a30e315807180688035ae9ee01ce
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6640
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
The variable 'jtag' is set to 'adapter_driver' during adapter
initialization and is used:
- to check if adapter has been initialized;
- as local copy of adapter_driver.
Introduce a static flag to check if the adapter has been already
initialized and a convenience test function.
Use the test function and the original value of adapter_driver in
the code and drop the variable 'jtag'.
Change-Id: I1b1c54d3b36d7b60390985d787c8449432788141
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6639
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Current code assumes all the GPIO signals are manipulated via a single
32-bit register so using higher GPIOs silently fails.
Fix the check instead of trying to handle additional GPIOs (available on
Raspberry Pi Compute Modules) as that would slow the driver down.
Change-Id: Ib3b5864afb3b972d952f9b74665201cd93924959
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6658
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This includes a USB blaster configuration that only worked with that
low-level access and some obsolete build-tests.
Change-Id: I53d27cbf782ebbd131b1af25e358adf35f2b4500
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6660
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This is a follow-up to 2f424b7eb, which added support for opendrain
srst, finishing up support for opendrain reset signals.
Signed-off-by: Alex Crawford <openocd@code.acrawford.com>
Change-Id: Ib79b2e12f2a9469fd6c53bb839c0d2e8e46103a4
Reviewed-on: https://review.openocd.org/c/openocd/+/6598
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The main purpose of TCP server is to allow multiple clients to
connect and share the same physical stlink.
The commands RW MISC don't lock the communication between command
and answer, thus cannot prevent another client to break this
sequence. The commands are not supposed to be used in shared mode.
Prevent the use of RW MISC commands on a (possibly) shared TCP
backend.
This degrades the overall performance, but the shared mode already
adds its own overhead, so this is not really an issue.
Change-Id: I713d912a269664859c8142932a9905d24b6d3caa
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6608
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Firmware versions V2J32 and V3J2 introduce the commands RW-MISC
to put in a single USB packet a sequence of mem_ap read/write.
These commands provide a significant speed improvement while
accessing the debug unit at scattered addresses.
Add the low level commands and extend high level implementation.
Skip for the moment the command to read the max number of items
allowed by the firmware and use some hardcoded values.
Change-Id: I8adc630cc0de733511e9d94533cbfe9f3b301a83
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6607
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
The stlink commands for buffer read/write carry the associated CSW
value that has to be used. We can dequeue any CSW write request
and add the CSW in the following buffer read/write.
In preparation to next patch that uses stlink commands misc-rw
(commands that don't handle CSW value), let's dequeue only those
CSW write that don't change csw_default.
Keep a local cache of last csw_default.
Tag the queued CSW writes that change csw_default.
Dequeue only the un-tagged CSW writes.
On buffer read/write commands, limiting the dequeued CSW write
surely adds a performance penalty. But csw_default is not changed
often so the penalty is not significant.
Change-Id: I538d257fe3c434fc97587846d759951384327f02
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6606
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Firmware versions V2J26 and V3J1 introduce the command
STLINK_DEBUG_WRITEMEM_32BIT_NO_ADDR_INC
Firmware versions V2J32 and V3J2 introduce the command
STLINK_DEBUG_READMEM_32BIT_NO_ADDR_INC
These new commands can provide speed improvement to Cortex-A
memory download (its debug port use a FIFO for data transfer).
Add the low level commands and extend high level implementation.
Change-Id: I3b65acbeaec3bd305f5568b9ee4bc9495b113448
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6605
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Detect a sequence of memory AP operations that can be issued as a
single stlink command.
This improves the data throughput during memory transfer.
Change-Id: Ifa4488513346fc7cd0c9317b7d24ef510ccfd959
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6604
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
By using the stlink commands for memory read write we can gain
some performance, but only when TAR and/or CSW are changed.
During long transfers with constant CSW and TAR auto-incremented
there is no gain, since the same amount of USB/TCP packet is used.
Plus, by dropping ADIv5 packed transfers the performance is lower
on 8 and 16 bits transfers.
This changes opens the opportunity for collapsing memory burst
accesses in a single stlink USB/TCP packet.
Initialize the values of enum queue_cmd to easily extract the word
size through a macro, even if this is not used here.
Change-Id: I6661a00d468a1591a253cba9feb3bdb3f7474f5a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6603
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Recent versions of stlink firmware allow accessing access port
other than zero and setting the CSW.
Modify the internal API to provide ap_num and csw.
There is no interest to modify HLA to use ap_num and csw, so set
and use some backward compatible defaults.
Change-Id: I3f6dfc6c670d19467d9f5e717c6c956db6faf7f3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6602
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Implement a minimalist queue for DP/AP commands and reorganize the
code to use it.
There is no performance improvement; the queue elements are still
sent one-by-one on USB or on TCP during dap_run().
Change-Id: I8353563e59f883624bcc0fbe8b54955e4f27ccfa
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6601
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Both HLA and ADIv5 layers limit the memory transfer within blocks
whose boundaries are aligned at 1024 or 4096 bytes.
New stlink firmware handle the ADIv5 TAR autoincrement, making
possible to send memory transfers across the boundary of 1024 or
4096 byte. OpenOCD doesn't use this feature yet.
Use the correct buffer size in the code, even if it is not used.
While there, split SWIM buffer size from JTAG/SWD case; stlink has
a dedicated command to retrieve SWIM buffer size, but currently
not implemented in OpenOCD.
Change-Id: Id46c0356ef21cead08726c044a1cd9725fd4f923
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6600
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Commit e3f3f60a02 ("adapter speed: require init script setting
and centralize activation from drivers to core.c") has already
dropped the only use of variable 'jtag_speed'.
Remove the variable.
Change-Id: Iff096df0022982cf90795aa62d6b3406203f7b14
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6638
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The struct aice_interface_param_s is declared but is never
referenced.
Drop it.
Change-Id: I4e6493d4baf292bb55dbd40228d4fa7c9e2afab5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6637
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The initialization is barely readable, while actually only few
fields are set with value nor zero nor NULL.
Rewrite the initialization using C99 struct designations.
Change-Id: I4d288e6536ebe7110a184db6540223fc67361ec3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6636
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
There is no reason to add the 'src' prefix.
Remove it.
Change-Id: Id7d7ee8b3807fb90381cc1d6d545321020bc06c1
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6634
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Clang scan-build complains about a variable assigned but never
used.
Although the value stored to 'val' is used in the
enclosing expression, the value is never actually read
from 'val'
Remove the dead assignment. While there, reduce the scope of the
variable by declaring the variable at the point of first use.
Change-Id: Ibe2b55a7d70597833cfa7f3d843e7c3d2407f2df
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6587
Tested-by: jenkins
The header files under src/helper/ can currently be included with
either
#include <bits.h>
or
#include <helper/bits.h>
This is because we specify both "src/" and "src/helper/" directories
as include directories. Some files name under "src/helper/", such as
types.h, log.h, and util.h are too generic and could be ambiguous
depending on the search path.
This commit remove "src/helper/" from our include dir and make C files
include explicitly.
Change-Id: I38fc9b96ba01a513d4a72757d40007e21b502f25
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6507
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Either for testing new commands and to retrieve information that
don't fit in any specific place of OpenOCD, for example monitoring
the target's VDD power supply from a TCL script.
Change-Id: Id43ced92c799b115bb1da1c236090b0752329051
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6564
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Some MCUs (e.g. the STM32F3) directly expose the internal reset line to
an external pin. When this signal is driven by a push/pull line, it can
actually be inhibited by the external driver. This results in a setup
where the MCU cannot reset itself, for example, by a watchdog timeout or
a sysreset request. To fix this condition, support for open drain output
on the SRST line is required.
Note that because `reset_config srst_open_drain` is the default, all
users of this adapter will switch over to an open drain output unless
explicitly configured otherwise.
Signed-off-by: Alex Crawford <openocd@code.acrawford.com>
Change-Id: I89b39b03aa03f826ed3c45793412780448940bcc
Reviewed-on: https://review.openocd.org/c/openocd/+/6559
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
1. Use TCP_NODELAY, which makes things twice as fast.
2. Get rid of a bunch of unnecessary socket block/non-block calls, which
improves speed another 10% or so.
Change-Id: I415db5746d55374a14564b1973b81e3517f5cb67
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6534
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The include file 'armv7m.h' includes 'arm_adi_v5.h' only to get
the definition of 'struct adiv5_ap', but doesn't need the struct
content.
Reducing the cross dependencies speeds-up the compile time during
code development by avoiding re-compiling file.
Relax the dependency by locally declaring 'struct adiv5_ap' in
'armv7m.h' and remove the include of 'arm_adi_v5.h'.
Fix the other files that have now lost the includes file that
'arm_adi_v5.h' depends from.
Change-Id: Ic0d40b17db6045fa43f348bda83eaf211a6b347d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6468
Tested-by: jenkins
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Add the 0x3754 PID used by some STLINK-V3 devices when MSD has been
disabled. This PID has been observed on a Nucleo-G431RB board.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Change-Id: Idb85874fa5a9dff5940bae7e95426a956693b976
Reviewed-on: https://review.openocd.org/c/openocd/+/6555
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
We are already at the limit for the number of VID/PID pairs declared
in stlink.cfg and stlink-dap.cfg. Increase the maximum number of pairs
from 8 to 16 to make room for a few more devices.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Change-Id: Ifad8e7ef67b930edbb5421730f00eb3390812f06
Reviewed-on: https://review.openocd.org/c/openocd/+/6554
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The NULL pointers preceded by cast where not detected by the
scripting tools looking for NULL pointer comparison.
Remove them and, while there, further simplify the code and apply
the other coding style rules.
Change-Id: Ia7406122e07ef56ef311579ab0ee7ddb22c8e4b5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6539
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
JEP106 encodes JEDEC-assigned manufacture code as:
a) a sequence of zero or more escape codes 0x7f;
b) an odd-parity bit of the next 7 bits;
c) 7 bits.
The same code is often represented as a single value composed by
the logical OR between:
- the number of escape codes in a), shifted left by 7 positions;
- the 7 bits in c).
This is the preferred packed representation used by this change.
Currently there are only two uses of JEP106 in openocd to get the
manufacturer name:
- to decode the JTAG IDCODE of each TAP, where the JEP106 code is
already packed as in the preferred representation above in bits
IDCODE[11:1];
- to decode the ARM CoreSight PIDR register, where the JEP106 code
is split in 3 parts:
= PIDR3[3:0], corresponding to bits [10:7] of the packed code;
= PIDR2[2:0], corresponding to bits [6:4] of the packed code;
= PIDR1[7:4], corresponding to bits [3:0] of the packed code.
Wrap the existing JEP106 decode function in a simpler API using
the packed code.
Simplify the callers by skipping the bit unpacking.
Change the manufacturer code in CoreSight table dap_partnums[] to
match the packed representation, by removing the always-one bit 7
erroneously taken from PIDR bit JEDEC and included in the former
table.
Change-Id: I63eb4da9e6801fab25e330f1f6b792d2fd619493
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6418
Tested-by: jenkins
Commit 89f07325f2 ("stlink: Set speed before entering JTAG/SWD
mode") anticipates setting the adapter speed just before entering
in the JTAG/SWD mode. This to initiate the communication with the
speed selected by the user.
But SWIM doesn't allow setting the speed before entering in SWIM
mode. The resulting error causes OpenOCD to quit.
The problem only happens with stlink-v3, due to the different way
to set the adapter speed on different stlink versions.
Set the speed before entering in the mode only for JTAG and SWD
modes.
Change-Id: Iab42cd9d72ecfac14c7e17bae74e0dee2218b235
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 89f07325f2 ("stlink: Set speed before entering JTAG/SWD mode")
Reviewed-on: https://review.openocd.org/c/openocd/+/6443
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
the usage of COMMAND_PARSE_NUMBER is safer in COMMAND_HANDLERs since it provides
better error checking than strto** functions.
Change-Id: Ife9342c6088a241a0a4b77f9bd21f12c9b9862a0
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6420
Reviewed-by: Adrian M Negreanu <adrian.negreanu@nxp.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Use a command group 'ft232r' with subcommands instead of individual
commands with 'ft232r_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: I0dbeb4716330c83f8ce89b0d054eb0286b887bdf
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6409
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'usb_blaster' with subcommands instead of individual
commands with 'usb_blaster_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: I2ae3d96ba864c20d7db67c74677781a62bfc4eb5
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6407
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'buspirate' with subcommands instead of individual
commands with 'buspirate_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: Id999d4ba276af576fb22b76052f3c0a1f3e1b876
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6404
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'sysfsgpio' with subcommands instead of individual
commands with 'sysfsgpio_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: I103d8d9b0e3169a916d944a999579746f6f6a59c
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6402
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'linuxgpiod' with subcommands instead of individual
commands with 'linuxgpiod_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: Iad9b330363f81128ab1ec1cbc498df28ba2ca152
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6400
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'jtag_vpi' with subcommands instead of individual
commands with 'jtag_vpi_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: Ie1fcc2cc138796d27f1e862692bb9ef8b11bc10d
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6398
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'bcm2835gpio' with subcommands instead of individual
commands with 'bcm2835gpio_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: I8f7b14273b1b2813ac3c9704605d175fa2053008
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6396
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'jtag_dpi' with subcommands instead of individual
commands with 'jtag_dpi_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: I19271546235a3c6737f975976a0bf0a2f66cbbe7
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6394
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'vsllink' with subcommands instead of individual
commands with 'vsllink_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: I59273bd7cd08c9801e4a9b3de7beaa86ca854622
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6393
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'ulink' with subcommands instead of individual
commands with 'ulink_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: I600d65de2bbd5fb8107445f7fe93b6b24c572e3e
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6392
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'xlnx_pcie_xvc' with subcommands instead of individual
commands with 'xlnx_pcie_xvc_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: I0deaaa14ed14f65bf356f3c248331bfab472f08d
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6391
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'presto' with subcommands instead of individual
commands with 'presto_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: I883d8d87fd457d29cee8d12cd80f2e6c405e8f42
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6390
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'remote_bitbang' with subcommands instead of individual
commands with 'remote_bitbang_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: I2692320f19c8a357112a365db6ca7e13cd6ad411
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6389
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'openjtag' with subcommands instead of individual
commands with 'openjtag_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: Ie1b1bf0b7c03e7703cfb074e554288384bf7b1b9
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6387
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'parport' with subcommands instead of individual
commands with 'parport_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: I4cb7096a8ba8d6cd7a6dc970862cd73c32b5c0a2
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6385
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
By pressing CTRL-C on a running openocd with FTDI adapter, it's
possible to generate a segmentation fault that with valgrind is
dumped as a SIGABRT:
^CError: libusb_handle_events() failed with LIBUSB_ERROR_INTERRUPTED
==16594== Invalid read of size 8
==16594== at 0x48B2472: libusb_submit_transfer
==16594== by 0x48B4B0F: libusb_control_transfer
==16594== by 0x1A6B9D: mpsse_purge (mpsse.c:428)
==16594== by 0x1A7B96: mpsse_flush (mpsse.c:953)
==16594== by 0x19BA5B: ftdi_execute_queue (ftdi.c:654)
...
==16594== Address 0x6158568 is 72 bytes inside a block of size 216 free'd
==16594== at 0x484118B: free (vg_replace_malloc.c:755)
==16594== by 0x1A7B88: mpsse_flush (mpsse.c:950)
==16594== by 0x19BA5B: ftdi_execute_queue (ftdi.c:654)
...
==16594== Block was alloc'd at
==16594== at 0x48435FF: calloc (vg_replace_malloc.c:1117)
==16594== by 0x48B2259: libusb_alloc_transfer
==16594== by 0x1A7A26: mpsse_flush (mpsse.c:880)
==16594== by 0x19BA5B: ftdi_execute_queue (ftdi.c:654)
...
==16594== Process terminating with default action of signal 6 (SIGABRT):
dumping core
...
Aborted (core dumped)
The error is in mpsse_flush() that, following valgrind dump:
- allocates the buffer at line mpsse.c:880
read_transfer = libusb_alloc_transfer(0);
- frees the buffer at line mpsse.c:950
libusb_free_transfer(read_transfer);
- still pretends to use the freed buffer at line mpsse.c:953
mpsse_purge(ctx);
Move the call to mpsse_purge() right before freeing the buffer.
Change-Id: I47c71ec8c283f4b037fdd7cd72ca2e877cd3a851
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6417
Tested-by: jenkins
Adds a new, optional configuration "bcm2835gpio_swdio_dir_num" to
the BCM2835 driver, to control the direction of an external buffer
driver IC in SWD mode. For example, this is needed to use a level-
shifting buffer, such as the SN74LVC2T45 used on the JTAG Hat
Change-Id: If5c146f310ecf8ceae85443b3670936467d2786d
Signed-off-by: Matthew Mets <matt@blinkinlabs.com>
Reviewed-on: http://openocd.zylin.com/6371
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Commit fceb29d03f ("jtag/aice: use macros in place of const
variables") replaces some 'static const uint8_t' with macros.
This breaks the build on MacOS because the macro values are of
'int' type that doesn't match with the printf format 'PRIx8'.
error: format specifies type 'unsigned char' but the
argument has type 'int' [-Werror,-Wformat]
Replace the printf format 'PRIx8' with 'x'.
While there, remove a useless cast to uint32_t and fix the printf
format too.
Change-Id: Ib87298a61637b75a2813f209e5209d39ab2745f8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: fceb29d03f ("jtag/aice: use macros in place of const variables")
Reviewed-on: http://openocd.zylin.com/6380
Tested-by: jenkins
The new checkpatch can automatically fix the code, but this
feature is still error prone and not complete.
Patch generated automatically through the new checkpatch with
flags "--types CONSTANT_COMPARISON --fix-inplace".
Some Yoda condition is detected by checkpatch but not fixed; it
will be fixed manually in a following commit.
Change-Id: Ifaaa1159e63dbd1db6aa3c017125df9874fa9703
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6355
Tested-by: jenkins
For the remaining NULL comparisons, remove then manually.
While there, make more readable a loop, by moving the assigment
out of the loop condition.
Change-Id: I44193aaa95813156a3a79c16b80e1ad333dc1eaf
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6353
Tested-by: jenkins
Patch generated automatically through a modified checkpatch that
detects the patterns
if (NULL == symbol)
if (NULL != symbol)
and through flags "--types COMPARISON_TO_NULL --fix-inplace".
The unmodified checkpatch detects this pattern as Yoda condition,
but it's odd fixing it as Yoda condition and then again as NULL
comparison. This triggered the modification to the script.
Change-Id: I5fe984a85e9c4fc799f049211797aef891ebce18
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6352
Tested-by: jenkins
Patch generated automatically through the new checkpatch with
flags "--types COMPARISON_TO_NULL --fix-inplace".
This only fixes the comparisons
if (symbol == NULL)
if (symbol != NULL)
The case of NULL on the left side of the comparison is not tested.
Some automatic fix is incorrect and has been massaged by hands:
- if (*psig == NULL)
+ if (*!psig)
changed as
+ if (!*psig)
Change-Id: If4a1e2b4e547e223532e8e3d9da89bf9cb382ce6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6351
Tested-by: jenkins
There are more than 1000 NULL comparisons to be aligned to the
coding style.
For recurrent NULL comparison it's preferable using trivial
scripts in order to minimize the review effort.
Patch generated automatically with the command:
sed -i PATTERN $(find src/ -type f)
where PATTERN is in the list:
's/(\([a-z][a-z0-9_]*\) == NULL)/(!\1)/g'
's/(\([a-z][a-z0-9_]*->[a-z][a-z0-9_]*\) == NULL)/(!\1)/g'
's/(\([a-z][a-z0-9_]*\.[a-z][a-z0-9_]*\) == NULL)/(!\1)/g'
's/(\([a-z][a-z0-9_]*\) != NULL)/(\1)/g'
's/(\([a-z][a-z0-9_]*->[a-z][a-z0-9_]*\) != NULL)/(\1)/g'
's/(\([a-z][a-z0-9_]*\.[a-z][a-z0-9_]*\) != NULL)/(\1)/g'
's/(NULL == \([a-z][a-z0-9_]*\))/(!\1)/g'
's/(NULL == \([a-z][a-z0-9_]*->[a-z][a-z0-9_]*\))/(!\1)/g'
's/(NULL == \([a-z][a-z0-9_]*\.[a-z][a-z0-9_]*\))/(!\1)/g'
's/(NULL != \([a-z][a-z0-9_]*\))/(\1)/g'
's/(NULL != \([a-z][a-z0-9_]*->[a-z][a-z0-9_]*\))/(\1)/g'
's/(NULL != \([a-z][a-z0-9_]*\.[a-z][a-z0-9_]*\))/(\1)/g'
Change-Id: Ida103e325d6d0600fb69c0b7a1557ee969db4417
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6350
Tested-by: jenkins
Fix the remaining Yoda conditions, detected by checkpatch but not
fixed automatically.
While there, apply minor style changes.
Change-Id: I6e1978b89c4d56a20aceaeb2b52968eb6384432a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6356
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Xiang W <wxjstz@126.com>
There are ~900 Yoda conditions to be aligned to the coding style.
For recurrent Yoda conditions it's preferable using a trivial
script in order to minimize the review effort.
E.g. comparison of uppercase macro/enum with lowercase variable:
- ...(ERROR_OK == retval)...
+ ...(retval == ERROR_OK)...
Patch generated automatically with the command:
sed -i \
's/(\([A-Z][A-Z0-9_]*\) \([=!]=\) \([a-z][a-z0-9_]*\))/(\3 \2 \1)/g' \
$(find src/ -type f)
While there, remove the braces {} around a single statement block
to prevent warning from checkpatch.
Change-Id: If585b0a4b4578879c87b2dd74d9e0025e275ec6b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6354
Tested-by: jenkins
Reviewed-by: Xiang W <wxjstz@126.com>
Uppercase symbols are normally used for macro or enum's values.
Convert the uppercase const variables to macros.
Change-Id: I749544c2e5deba65583824a7c2a6023e697714df
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6346
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>
Uppercase symbols are normally used for macro or enum's values.
Convert the uppercase const variables to macros.
Change-Id: I4ba47ce2d3183b50730c5a9a265f274c7b802519
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6345
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>
Reviewed-by: Xiang W <wxjstz@126.com>
Use a command group 'ftdi' with subcommands instead of individual
commands with 'ftdi_' prefix.
The old commands are still available for backward compatibility but
marked as deprecated.
Change-Id: I93a0ae7070226cd2fdea566effeb14a141269de8
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6332
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
No major cross dependency, just changes internal to each file or
function.
Change-Id: Ie6258a090ce53de5db65df6a77d57ac6bb899488
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6301
Tested-by: jenkins
The stlink driver incorrectly uses a NULL pointer for libusb's
struct libusb_context.
The correct value to be used is local in libusb_helper.c.
Move in the helper file, in a wrapper function, the only call that
requires the above value, and let stlink driver to use this
wrapper.
This issue has not triggered any visible problem until a code
refactoring [1] in libusb has made OpenOCD crashing on Windows and
on MacOS.
Change-Id: Id1818c8af7cf0d4d17dfa1d22aad079da01ef740
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: https://sourceforge.net/p/openocd/tickets/308/
Fixes: https://github.com/libusb/libusb/issues/928/
Fixes: 42d8fa899c ("stlink_usb: Submit multiple USB URBs at once to improve performance")
Link: [1] https://github.com/libusb/libusb/commit/32a22069428c
Reported-by: Andrzej Sierżęga <asier70@gmail.com>
Co-developed-by: Andrzej Sierżęga <asier70@gmail.com>
Co-developed-by: Xiaofan Chen <xiaofanc@gmail.com>
Reviewed-on: http://openocd.zylin.com/6331
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Change 7dd323b26 reduced remote bitbang performance a lot. This change
gets most of that performance back again, by reintroducing a write
buffer.
Performance numbers collected using DebugBreakpoint test from
riscv-tests/debug against a single 64-bit spike (RISC-V simulator)
instance. (Ubuntu 20.04.2, AMD Ryzen 5 3600)
Before Windows support was added: 3.09s
After Windows support was added: 12.67s
After this change: 4.69s
Signed-off-by: Tim Newsome <tim@sifive.com>
Change-Id: I72ff4912cbbf316a30ef065e5b8f461a555f06cc
Reviewed-on: http://openocd.zylin.com/6283
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This makes the messages consistent with most of the rest of
the OpenOCD output.
Change-Id: I915a01187e7fc317e02483ac0bbd39ec077d6321
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6274
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
With the API fixed to comply with OpenOCD coding style, fix all
the references in the code.
Patch generated automatically with the script below.
The list is in reverse order to replace a common prefix after the
replacement of the symbols with the same prefix.
%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---
(cat << EOF
Jim_SetResult_NvpUnknown jim_set_result_nvp_unknown
Jim_Nvp_value2name_simple jim_nvp_value2name_simple
Jim_Nvp_value2name_obj jim_nvp_value2name_obj
Jim_Nvp_value2name jim_nvp_value2name
Jim_Nvp_name2value_simple jim_nvp_name2value_simple
Jim_Nvp_name2value_obj_nocase jim_nvp_name2value_obj_nocase
Jim_Nvp_name2value_obj jim_nvp_name2value_obj
Jim_Nvp_name2value_nocase_simple jim_nvp_name2value_nocase_simple
Jim_Nvp_name2value_nocase jim_nvp_name2value_nocase
Jim_Nvp_name2value jim_nvp_name2value
Jim_Nvp struct jim_nvp
Jim_GetOpt_Wide jim_getopt_wide
Jim_GetOpt_String jim_getopt_string
Jim_GetOpt_Setup jim_getopt_setup
Jim_GetOpt_Obj jim_getopt_obj
Jim_GetOpt_NvpUnknown jim_getopt_nvp_unknown
Jim_GetOpt_Nvp jim_getopt_nvp
Jim_GetOpt_Enum jim_getopt_enum
Jim_GetOpt_Double jim_getopt_double
Jim_GetOpt_Debug jim_getopt_debug
Jim_GetOptInfo struct jim_getopt_info
Jim_GetNvp jim_get_nvp
Jim_Debug_ArgvString jim_debug_argv_string
EOF
) | while read a b; do
sed -i "s/$a/$b/g" $(find src -type f ! -name jim-nvp.\? )
done
%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---
Change-Id: I10a12bd64bb8b17575fd9150482c989c92b298a2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6184
Reviewed-by: Marc Schink <dev@zapb.de>
Tested-by: jenkins
The corresponding bit for each macro is changed, but this is not
relevant in the code.
Change-Id: I7039464f5a3d55d008208f44952aadeb815bd5a3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6212
Tested-by: jenkins
Some help text end with a useless space character.
Remove it.
Change-Id: I397e1194fac8042f0fab694222f925f906716de3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6222
Tested-by: jenkins
There are still few cases where the macro ARRAY_SIZE() should be
used in place of custom code.
Use ARRAY_SIZE() whenever possible.
Change-Id: Iba0127a02357bc704fe639e08562a4f9aa7011df
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6260
Reviewed-by: Xiang W <wxjstz@126.com>
Tested-by: jenkins
Replace the custom macro dimof() with the OpenOCD macro
ARRAY_SIZE().
Change-Id: I2fe638444f6c16f2a78c1fd558b21550f76282d6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6259
Tested-by: jenkins
Reviewed-by: Xiang W <wxjstz@126.com>
Minor typos found by the new checkpatch boosted by the dictionary
provided by 'codespell'.
Change-Id: I101c76a638805d77c1ff356cf0f027552389e5d3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6216
Tested-by: jenkins
Compile fails with error:
src/jtag/drivers/cmsis_dap.c:683:28: error: format specifies type
'unsigned char' but the argument has type 'int' [-Werror,-Wformat]
" received 0x%" PRIx8, CMD_DAP_TFER, resp[0]);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
Fix the format specifier.
Change-Id: I0a5a1a35452d634019989d14d849501fb8a7e93a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6255
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
IPDBG are utilities to debug IP-cores. It uses JTAG for
transport to/from the FPGA. The different UIs use TCP/IP
as transport. The JtagHost makes the bridge between these
two.
Comparable to the bridge between GDB and the in-circuit-
debugging-unit of a micro controller.
Change-Id: Ib1bc10dcbd4ea426e492bb7b2d85c1ed1b7a8d5a
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: http://openocd.zylin.com/5938
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single
arg") drops the support for multi-argument syntax for the TCL
command 'expr'.
Modify the script startup.tcl compiled-in OpenOCD binary to comply
with the new jimtcl.
Change-Id: I520dcafacadaa289a815035f93f250447ca66ea0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6158
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
For both:
- TCL proc that redirect deprecated commands to the new commands,
- TCL proc used internally and not supposed to be exposed to user,
add their name to the list of commands that should be hide by the
telnet auto-complete.
Change-Id: I05237c6a79334b7d2b151dfb129fb57b2f40bba6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6195
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Remove a use of AH_BOTTOM from configure.ac. This macro is used by
autoheader to add '#include' of some include file to the end of
config.h.in and then to config.h. OpenOCD can be built with a custom
config.h, so it's preferable to move these '#include' statement directly
in the C files that need them dropping this unneeded dependency.
It also causes problems when I want to use the gnulib library (which
comes with its own Makefile, and does not have the same include path as
the top-level Makefile).
So this change touches a lot of files, but is actually really simple. It
does not affect functionality at all.
Change-Id: I52c70bf15eb2edc1dd10e0fde23b2bcd4caec000
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: http://openocd.zylin.com/6171
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Currently, all drscan commands will cycle through DR-PAUSE before reaching
TAP-IDLE. This patch provides a different path on FTDI driver.
This change is required for the ST On Chip Emulator (OnCE), to avoid
re-enabling the OnCE tap after every DRSCAN. This is because the OnCE
TAP (see ST Application Note AN4035) gets disabled if DR-PAUSE is entered
before DR-UPDATE.
With this commit, the current path:
DR-SHIFT -> DR-EXIT1 -> DR-PAUSE -> DR-EXIT2 -> DR-UPDATE -> IDLE
is changed to:
DR-SHIFT -> DR-EXIT1 -> DR-UPDATE -> IDLE
only if IDLE is the endstate (which is the driver default).
Before this patch, once the SHIFT sequence is complete, the driver would
normally move to the nearest stable state, which is DR-PAUSE, by clocking
out a '10' binary sequence. Then it would follow the path provided by
tap_get_tms_path() to reach endstate. It is done this way because
tap_get_tms_path() only supports stable states.
After this patch, the strategy is mostly the same, with the exception that,
if TAP_IDLE is the endstate, a '110' binary sequence is output after completing
the SHIFT sequence. This takes the TAP directly to IDLE, with no further action
required.
A scheme of the DR chain is shown below. A * character is used to mark the
stable states.
----------------------------------------------------------------------
| | 0
v 1 0 0 1 0 1 1 |
IDLE* -> SEL-DR -> CAPTURE -> SHIFT* -> EXIT1 -> PAUSE* -> EXIT2 -> UPDATE
| ^
1 | |
-----------------------------
Change-Id: Ib413e5c4c0bbf75dae0b4672119bae4ef03d0258
Signed-off-by: Luis de Arquer <luis.dearquer@inertim.com>
Reviewed-on: http://openocd.zylin.com/6123
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
The documentation of Jim_SetResultFormatted() reports that the jim
objects passed as arguments would be freed if have zero refcount.
Remove the useless Jim_IncrRefCount()/Jim_DecrRefCount().
Remove the dangerous Jim_FreeNewObj() that should trigger a double
free(). Not tested due to lack of aice adapter.
While there, rename some CamelCase symbol.
Change-Id: Ic56704c83d6391c38f6b0efa6566784d453bc0fb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6190
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Libusb defines both the struct and a typedef to the struct using
the same struct name. It's then possible to use either 'struct x'
and 'x'. E.g.:
typedef struct libusb_device libusb_device;
OpenOCD is not consistent and uses a mix of 'struct x' and 'x'.
To make OpenOCD code uniform, stick at project's coding style and
use 'struct x' in place of the typedef'd name.
Change-Id: I901458b680e42830d3f371e47997157f91b7f675
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6165
Tested-by: jenkins
Reviewed-by: Jonathan McDowell <noodles-openocd@earth.li>
Reviewed-by: Marc Schink <dev@zapb.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Uses CMSIS-DAP v 1.2 or higher protocol command DAP_SWD_Sequence
to write to DP TARGETSEL register. This write is not acknowledged
by device so we cannot use standard DAP_Transfer
Change-Id: Ib252d09570bcc2282be5f854e0ab9a0dfda06189
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/6117
Tested-by: jenkins
Reviewed-by: Peter Lawrence <majbthrd@gmail.com>
Antonio Borneo
Tomas Vanek
Tarek BOCHKATI
Jan Matyas
Paul Fertser
Andreas Fritiofson
Alex Crawford
Yasushi SHOJI
Tim Newsome
Andreas Sandberg
Marc Schink
PoroCYon
Matthew Mets
R. Diez
Adrian Negreanu
Daniel Anselmi
Luis de Arquer
Peter Lawrence