Commit Graph

1133 Commits

Author SHA1 Message Date
Jacek Wuwer f998a2aaf1 Cadence virtual debug interface (vdebug) integration
Change-Id: I1bc105b3addc3f34161c2356c482ff3011e3f2cc
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6097
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-02-14 15:12:10 +00:00
Hans-Erik Floryd 5e0cc43838 tcl/board: Add EVB-LAN9255 config
Config for EVB-LAN9255, tested using Atmel-ICE debugger on J10
connector.

Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Change-Id: I8bcf779e9363499a98aa0b7d10819c53da6a19e7
Reviewed-on: https://review.openocd.org/c/openocd/+/6812
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-01-29 18:20:07 +00:00
Doug Brunner aad8718058 flash/nor/efr32: fixed lockbits and user data
Changed flash driver to support writing to the user data page, as well as to any portion of the lockbits page above 512 bytes (the amount used for the actual page lock words). The top part of the lockbits page is used on at least the EFR32xG1 chips for the SiLabs bootloader encryption keys.

As presented to the user, the lockbits page is the same size as the other pages, but any attempt to write to its low 512 bytes is an error. To enforce this, efr32x_write is renamed to efm32x_priv_write and a wrapper function is provided in its place. If the user erases the lockbits page, the driver rewrites the cached lock words after the erase. When the driver erases the lockbits page in order to update the lock words, it first takes a copy of anything stored in the top part of the page, and re-programs it after the erase operation.

There are now multiple instances of flash_bank for each target, and the flash_bank instances must share their cached lock words to operate as intended. Therefore, when a bank is created, the global flash bank list is used to find any other banks that share the same target. Since some banks in the global list are invalid at the time free_driver_priv is called, reference counting is used to decide when to free driver_priv.

To avoid the need to find the lockbits flash_bank from another flash_bank, efm32x_priv_write and efm32x_erase_page now take an absolute address.

There didn't seem to be any reason to prohibit unprotecting individual flash pages, so that limitation is removed from efm32x_protect().

This addresses ticket #185.

Valgrind-clean, except for 2x 4kiB not freed/still reachable blocks that were allocated by libudev.
No new Clang analyzer warnings, no new sanitizer warnings.

Signed-off-by: Doug Brunner <doug.a.brunner@gmail.com>
Change-Id: Ifb22e6149939d893f386706e99b928691ec1d41b
Reviewed-on: https://review.openocd.org/c/openocd/+/6665
Tested-by: jenkins
Reviewed-by: Fredrik Hederstierna <fredrik.hederstierna@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2022-01-05 17:57:08 +00:00
Joerg Wunsch d674018432 Add Microchip SAME51 Curiosity Nano board
This board is (software wise) similar to the existing SAME54 Xplained
Pro board, with just a slightly different MCU. (Hardware wise, it
features a vastly different form factor.)

Signed-off-by: Jörg Wunsch <openocd@uriah.heep.sax.de>
Change-Id: I5e5435d49d333fb74471994ee84de59ed983153c
Reviewed-on: https://review.openocd.org/c/openocd/+/6747
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Axel W.
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-11 17:44:58 +00:00
Antonio Borneo 57d9fd9bbc tcl: stm32mp13x: add target and board config files
The stm32mp13x has one core Cortex-A7.

The board Discovery Kit includes an on-board STLink-V3 with SWD
connection.
The webpage of the board is not active yet.

Change-Id: I8836b26612a160ead79766955ebefaf3d21a329c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6675
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-12-03 21:50:59 +00:00
Antonio Borneo c6460ea36d jtag/hla, jtag/stlink: switch to command 'adapter serial'
The driver hla defines the command 'hla_serial' to specify the
serial string of the adapter.
The driver st-link defines the command 'st-link serial' to specify
the serial string of the adapter.

Remove and deprecate the driver commands and use 'adapter serial'.

Change-Id: I9505c398a77125b1ebf4ba71da7baf4d663b75be
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6657
Tested-by: jenkins
2021-11-28 11:01:16 +00:00
Antonio Borneo ad18c1a47f jtag/jlink: switch to command 'adapter serial'
The driver jlink defines the command 'jlink serial' to specify the
serial string of the adapter.

Remove and deprecate the driver command, and use 'adapter serial'.

Note: in former code the commands 'jlink serial' and 'jlink usb'
were mutually exclusive; running one of them would invalidate the
effect of a previous execution of the other. The new code gives
priority to 'adapter serial', even if executed before 'jlink usb'.

Change-Id: I920b0c136716f459b6fd6f7da8a01a7fa1ed389f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6656
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
2021-11-28 11:00:55 +00:00
Antonio Borneo 61a2f3284b jtag/xds110: switch to command 'adapter serial'
The driver xds110 defines the command 'xds110 serial' to specify
the serial string of the adapter.

Remove and deprecate the driver command, and use 'adapter serial'.

Note: the original command 'xds110 serial' used a complex and
undocumented conversion of the serial number through multibyte
string, wide-character string and C cast. The XDS110 I can access
and the lsusb dumps available through Google don't show any
exotic USB serial that require such conversion. The original
developer doesn't remember any constraint that mandates such
conversion (see comments in https://review.openocd.org/4322/).
The conversion is removed by this patch.

Change-Id: I38909918079b2c1797ad85ebec2fea1b33743606
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6655
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2021-11-28 10:59:23 +00:00
Antonio Borneo d7b2313b5a jtag/kitprog: switch to command 'adapter serial'
The driver kitprog defines the command 'kitprog_serial' to specify
the serial string of the adapter.

Remove and deprecate the driver command, and use 'adapter serial'.

Change-Id: I844cb815af01137392b6d12e1b5972fc77ac092d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6652
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2021-11-28 10:58:14 +00:00
Antonio Borneo b1afd3dba4 jtag/ftdi: switch to command 'adapter serial'
The driver ftdi defines the command 'ftdi serial' to specify the
serial string of the adapter.

Remove and deprecate the driver command, and use 'adapter serial'.

Change-Id: Ia5b1f325b9fab8f58b5ea70f8b807e50b148b939
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6651
Tested-by: jenkins
2021-11-28 10:57:22 +00:00
Antonio Borneo 248161cbf4 jtag/cmsis_dap: switch to command 'adapter serial'
The driver cmsis_dap defines the command 'cmsis_dap_serial' to
specify the serial string of the adapter.

Remove and deprecate the driver command, and use 'adapter serial'.

Change-Id: I88e2d4de360a6c6f23529bb18494962a267250df
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6649
Tested-by: jenkins
2021-11-28 10:55:49 +00:00
Antonio Borneo a3b69dee62 jtag/aice: switch to command 'adapter serial'
The driver aice defines the command 'aice serial' to specify the
serial string of the adapter, but actually does not use this value
in the code.

Remove and deprecate the driver command, and use 'adapter serial'.

Change-Id: I892e0a4e1b41a7a87adf54a5736abf7419f32979
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6648
Tested-by: jenkins
2021-11-28 10:50:50 +00:00
asier70 5a0b4889d0 flash/nor/stm32f1x: Add support for GD32E23x
GD32E23x from GigaDevice is cortex-M23 microcontroller and it can work with the stm32f1x driver.
Modifications are similar to this done for GD32F1x0 in #6164 (https://review.openocd.org/c/openocd/+/6164).
Configuration file is added because its cortex-M23 CPU ID is different.
I think that GigaDevice microcontrollers should be handled in an independent unit to separate them from STM32,
but nowadays quick solution is welcome.

Signed-off-by: asier70Andrzej Sierżęga <asier70@gmail.com>
Change-Id: I91f31f5f66808bc50a8f607ac2c107e6b7c5e2b8
Reviewed-on: https://review.openocd.org/c/openocd/+/6527
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-11-15 15:35:50 +00:00
Antonio Borneo f4612e06c6 tcl/stm32mp15x: freeze watchdog, recover SWD after power cycle
Freeze the IWDG watchdog when cores are halted to prevent a reset
while debugging.

The PMIC present on some board senses the nsrst and forces a power
cycle to the target. The power cycle causes the SWJ-DP to restart
in JTAG mode. If the debugger is using SWD, the mismatch triggers
an error after the reset command.
Ignore the error detected by 'dap init' and proceed executing the
handler. The error in 'dap init' will force a reconnect during the
following 'dap apid', restoring the SWD functionality.

Change-Id: I04fcda6a5b8a1b080ab4e8890ecd0754d5ed12d9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6599
Tested-by: jenkins
2021-10-25 16:11:22 +00:00
Tarek BOCHKATI c3993d3188 tcl/stm32wlx.cfg: comply with new jimtcl expr syntax
Change-Id: I2e9fd528817b14396c7643801aeea5c8dde668e0
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6557
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-09-25 13:37:28 +00:00
Andreas Sandberg 564e7576ab stlink: Add PID for V3 device without MSD
Add the 0x3754 PID used by some STLINK-V3 devices when MSD has been
disabled. This PID has been observed on a Nucleo-G431RB board.

Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Change-Id: Idb85874fa5a9dff5940bae7e95426a956693b976
Reviewed-on: https://review.openocd.org/c/openocd/+/6555
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-09-18 15:27:16 +00:00
Tarek BOCHKATI fc74ccda52 tcl/target/stm32(f7/h7)x: do not assume presence of the reset
do not force the presence of the reset line, since some custom boards
may do not contain the reset line.

Change-Id: I031ab34012b34a1b49def9db16461f9de0ae29cc
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reported-by: Fleck <fleckz@users.sourceforge.net>
Fixes: https://sourceforge.net/p/openocd/tickets/316/
Reviewed-on: https://review.openocd.org/c/openocd/+/6506
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2021-09-17 12:57:57 +00:00
Tarek BOCHKATI 57c61cee4b tcl/board: add st_nucleo_g4.cfg to cover known STM32G4 NUCLEO boards
known boards are NUCLEO-G431KB, NUCLEO-G431RB and NUCLEO-G474RE

note: this work safely with B-G431B-ESC1, B-G474E-DPOW1,
      STM32G474E-EVAL and STM32G484E-EVAL

Change-Id: I132a97e1816620b182983edc8a4b272b52b9241d
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/5484
Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-09-04 07:25:20 +00:00
Tarek BOCHKATI be22b93a44 tcl/board: add st_nucleo_g0.cfg to cover known STM32G0 NUCLEO boards
known boards are NUCLEO-G031K8, NUCLEO-G070RB, NUCLEO-G071RB

note: this work safely with STM32G0316-DISCO, STM32G071B-DISCO
      and STM32G081B-EVAL

Change-Id: I483b6f44409228cd8c2c97b3c560927d1645c517
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/5483
Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-09-04 07:25:06 +00:00
Marc Schink 3359419e6a tcl/board/arty_s7: Fix proc and chip name
Tested with Digilent Arty S7 board.

Change-Id: I064f3b6537ae8d765d7f380ad53b922d584fdbe7
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/6509
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-09-04 07:23:58 +00:00
Wealian Liao 385eedfc6f flash/nor: add support for Nuvoton NPCX series flash
Added NPCX flash driver to support the Nuvoton NPCX series
microcontrollers. Add config file for NPCX series.

Change-Id: Ia10b019a3521f59ad1e10ccdc56827ba30c3eac8
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/5950
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2021-09-02 06:42:54 +00:00
Tarek BOCHKATI c2ad18d68b flash/stm32l4x: add support of STM32U57x/U58x
this device flash registers are quite similar to STM32L5
with this changes :
 - flash size is up to 2MB
 - 2MB variants are always dual bank
 - 1MB and 512KB variants could be dual bank (contiguous addressing)
   depending on DUALBANK bit(21)
 - flash data width is 16 bytes (quad-word)

Change-Id: Id13c552270ce1071479ad418526e8a39ebe83cb1
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6108
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2021-08-30 07:51:52 +00:00
Tarek BOCHKATI 6c1e1a212a flash/stm32l4x: add support of STM32WL5x dual core
according the RM0453, the second core  have a different Flash CR and SR
registers for flash operations (called C2CR and C2SR).
so we need to a different flash_regs than older L4 devices.
@see stm32wl_cpu2_flash_regs

the C2CR register don't contain LOCK and OPTLOCK bits, and this explain
the addition of new register index called STM32_FLASH_CR_WLK_INDEX to
look-up the CR with lock, to be used in locking/unlocking the flash.

note: DBGMCU_IDCODE cannot be read using CPU1 (Cortex-M0+) at AP1,
to solve this read the UID64 (IEEE 64-bit unique device ID register)

Change-Id: Ifb6e291bf97f814f0b9987b2c40f3037959f7af4
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6050
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2021-08-26 13:13:02 +00:00
Tarek BOCHKATI e609d5a5de flash/stm32l4x: STM32L5 support programming when TZEN=1 and RDP=0x55
when RDP level is 0.5 the provided work-area should reside in non-secure RAM
to ensure that:
 - add a hint in the driver level
 - reduce the usage of secure RAM only when TZEN=1 and RDP is not 0.5
   (check the target configuration file)

Change-Id: Idbf2325e609b84ef8480eefdb49a176fdf7e07c7
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6035
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Tested-by: jenkins
2021-08-26 06:21:38 +00:00
Tarek BOCHKATI c9d40366ad flash/stm32l4x: STM32L5 support programming when TZEN=1 and RDP=0xAA
STM32L5 flash memory is aliased to 0x0C000000, this address mapping
is used for secure applications. (0x08000000 for non-secure)

this change allows the programming of secure and non-secure flash
when trustzone is enabled and RDP level is 0

Change-Id: I89d1f1b5d493cf01a142ca4dbfef5a3731cab96e
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/5936
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2021-08-26 06:19:15 +00:00
Oleksij Rempel 76ba25a8a5 tcl: add lattice ECP5 family support
Add support for ECP5 FPGA targets and board based on this chips:
Radiona ULX3S and Lambdaconcept ECPIX-5

Change-Id: I932fc6e2458cda7d63ac21579acddea5b53410bc
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/6112
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2021-08-25 03:47:50 +00:00
Ranjith Chandran 53556fcded tcl/interface: add Ashling Opella-LD FTDI config files
Adding Ashling's FTDI based Debug adapter Opella-LD's JTAG and SWD config files

Change-Id: Ie0e82e3b8326de37641901f5c825372cab31de58
Signed-off-by: ranjith.tc@ashling.com
Reviewed-on: http://openocd.zylin.com/6379
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-08-14 13:38:03 +01:00
Marc Schink ae5c438b00 tcl: Adapt config files to new usb_blaster command syntax
Change-Id: I4eb645f74ef31fc0b5882299b3487020aa142dd8
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6408
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-08-14 13:37:29 +01:00
Marc Schink e53f1c907a tcl/interface/buspirate: Adapt to new buspirate command syntax
Change-Id: I1a82608532f043054abd22eb5b50ab5c5f58cee4
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6405
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-08-14 13:36:58 +01:00
Marc Schink 8d70a67b20 tcl/interface: Adapt config files to new sysfsgpio command syntax
Change-Id: I8e8dee6e8869d2853a7a73c8d4dc8b4891fb0389
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6403
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-08-14 13:36:38 +01:00
Marc Schink 14cefe8206 tcl/interface/dln-2-gpiod: Adapt to new linuxgpiod command syntax
Change-Id: Ife1e52fe5da0e0374a606072f1faf7c598cf0e2b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6401
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-08-14 13:36:16 +01:00
Marc Schink a33646a882 tcl/interface/jtag_vpi: Adapt to new jtag_vpi command syntax
Change-Id: I27eeab5e3dd554af00799104471ee8f30fbd0c51
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6399
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-08-14 13:35:48 +01:00
Marc Schink e57ffd84b8 tcl/interface: Adapt config files to new bcm2835gpio command syntax
Change-Id: I2d649117aa8dbdf5484ace068785a1416efa3ecc
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6397
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-08-14 13:35:21 +01:00
Marc Schink 30bb4524de tcl/interface/jtag_dpi: Adapt to new jtag_dpi command syntax
Change-Id: Icebf6f0a037f4ea9fb450581fcc599417bffc153
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6395
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-08-14 13:35:02 +01:00
Marc Schink dd04079c2c tcl/interface/openjtag: Adapt to new openjtag command syntax
Change-Id: I3a9d649dd38a913b1ce6d4a2d506bbf44743d529
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6388
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-08-14 13:33:19 +01:00
Marc Schink 3ce92fa33d tcl/interface: Adapt config files to new parport command syntax
Change-Id: Iffe7a04c36c6ec680497081a99d55b8c69f8f079
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6386
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-08-14 13:32:54 +01:00
Oleksij Rempel 16eee77c10 add config for Microchip SAMA5D27 SOM1 Kit1
... and related SAMA5D27 SoC.

Change-Id: Ic2584e3005ac691642dc2e5a8ee3fb8a4eacaa00
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/5275
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2021-08-14 08:04:38 +01:00
Jian-Hong Pan 25d45da407 tcl/board: Add Raspberry Pi 4 model B board
OpenOCD cannot connect to BCM2711's JTAG interface on RPi 4B board until
the reset configuration mode is set as trst_only.

According to Table 94. GPIO Pins Alternative Function Assignment of
Broadcom's BCM2711 ARM Peripherals datasheet [1] and Raspberry Pi's GPIO
control in config.txt document [2], only Test Reset (TRST) pin (no
System Reset, SRST) is exposed.

[1] https://datasheets.raspberrypi.org/bcm2711/bcm2711-peripherals.pdf
[2] https://www.raspberrypi.org/documentation/configuration/config-txt/gpio.md

Change-Id: I806f0be9700fa0f0944b42c8a651a5731adc762b
Link: http://openocd.zylin.com/#/c/6364/1
Signed-off-by: Jian-Hong Pan <chienhung.pan@gmail.com>
Reviewed-on: http://openocd.zylin.com/6367
Tested-by: jenkins
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-07-31 10:09:29 +01:00
Jian-Hong Pan f5aa2e11cd tcl/board: Add Raspberry Pi 3 board
OpenOCD cannot connect to BCM2837's JTAG interface on RPi 3 board until
the reset configuration mode is set as trst_only.

According to Table 6-31 GPIO Pins Alternative Function Assignment of
Broadcom's BCM2837 ARM Peripherials datasheet [1] and Raspberry Pi's
GPIO control in config.txt document [2], only Test Reset (TRST) pin (no
System Reset, SRST) is exposed.

[1] https://usermanual.wiki/Datasheet/BCM2837ARMPeripheralsBroadcom.1054296467/view
[2] https://www.raspberrypi.org/documentation/configuration/config-txt/gpio.md

Change-Id: I26ff3924039ff7943faf0a5b1ad0427c8dbb88f2
Link: http://openocd.zylin.com/#/c/6364/1
Signed-off-by: Jian-Hong Pan <chienhung.pan@gmail.com>
Reviewed-on: http://openocd.zylin.com/6366
Tested-by: jenkins
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-07-31 10:09:23 +01:00
Matthew Mets dbb10a57d1 interface/jtag_hat: Add interface configuration for the JTAG HAT
This adds support for the Blinkinlabs JTAG Hat, a Raspberry Pi
expansion board that provides JTAG and SWD connections via level-
shifting buffers.

Change-Id: I228bf6a18890b7c3d6679bbc63bfe39f726d8323
Signed-off-by: Matthew Mets <matt@blinkinlabs.com>
Reviewed-on: http://openocd.zylin.com/6372
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-07-31 10:07:44 +01:00
Marc Schink 7c38f24529 tcl: Adapt config files to new ftdi command syntax
The patch was created automatically using the following
script:

%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---
(cat << EOF
ftdi_device_desc ftdi device_desc
ftdi_serial ftdi serial
ftdi_channel ftdi channel
ftdi_layout_init ftdi layout_init
ftdi_layout_signal ftdi layout_signal
ftdi_set_signal ftdi set_signal
ftdi_get_signal ftdi get_signal
ftdi_vid_pid ftdi vid_pid
ftdi_tdo_sample_edge ftdi tdo_sample_edge
EOF
) | while read a b; do
sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" )
done
%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---

Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6333
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-07-20 14:51:20 +01:00
Patrick Stewart 554878b9d3 tcl/interface/ftdi: Fix Digilent JTAG-SMT2 config
Drive the output enable for TMS and TDI

Change-Id: Ib23afd2f5149d4ce402d88781e68dcf0f074f395
Signed-off-by: Patrick Stewart <patstew@gmail.com>
Reviewed-on: http://openocd.zylin.com/4179
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2021-07-10 15:27:21 +01:00
Andreas Fritiofson f723e94f52 config/ftdi: Add tristate capability to sheevaplug config
The legacy ft2232 driver suggests that the adapter has tristate
buffers on both nSRST and nTRST, even though they were not used as
such.

Change-Id: I971692ea6b3439ac93311b89877825a5cc21df46
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/3663
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-07-10 15:26:55 +01:00
Florian Fainelli 28c91b8f80 tcl: Update Flyswatter product links
The Flyswatter URL is dead and requires us to use web.archive.org since
the product is discontinued. The Flyswatter 2 is still active and
accessible at a different URL.

Change-Id: Ib2d9de70a9728b0f0ef73f5e479bca81f958442c
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-on: http://openocd.zylin.com/6337
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-07-02 17:14:49 +01:00
Marek Vasut fb34fd60ca tcl/board: Add Renesas Falcon board
Add board configuration for Renesas Falcon board based on the R8A779A0 V3U SoC.

Change-Id: If8369f2e2b97dfea9ccbee2c9b916ef7094f9b92
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/6315
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-26 14:39:37 +01:00
Marek Vasut 7c8a068a40 tcl/target: Add support for Renesas R8A779A0 V3U SoC
The V3U SoC is unique in that it now has 8x CA76 and CR52,
while the previous SoCs had CA57/CA53/CR7 . This can still
be handled without too complex modifications to the gen3
configuration file, so add the logic to handle it there.

Change-Id: I7ab33eacc1fd379d369988d3d6690d2e82346c7e
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/6314
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-26 14:39:30 +01:00
Marek Vasut a38a0afd17 tcl/target: Select default boot core on Renesas R-Car Gen2/Gen3
On SMP Renesas R-Car Gen2/Gen3 systems, select the boot core as
the default target using the 'targets' command. This way, the
user can start debugging code running on the boot core without
having to switch to the boot core by explicitly invoking 'targets'
command first, since it is likely the debugged code will run on
the boot core. Note that most of the code is already in place, it
was just not used, so this is more of a fix to make the original
intention work.

Change-Id: I727808adce617c1d9ebd6ffa34f60f5882cdae60
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/6313
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-26 14:39:22 +01:00
Rohit Singh af39ee607c tcl: Add support for the Digilent Nexys Video board
* https://store.digilentinc.com/nexys-video-artix-7-fpga-trainer-board-for-multimedia-applications/
* https://reference.digilentinc.com/_media/nexys-video:nexys_video_sch.pdf

The Nexys Video board has FTDI FT2232 whose channel B is connected to
Artix-7 FPGA's JTAG pins, and can be supported by OpenOCD's
ftdi interface. Tested to be working fine on real hardware.

Change-Id: I2996166dc8c2b6c08a9390958adfcdec8fc2bd37
Signed-off-by: Rohit Singh <rohit91.2008@gmail.com>
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/4364
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 23:50:58 +01:00
micbis 11598cb1be target/renesas_rz_g2: Introduce tcl config file for RZ/G2 devices
Initial support for Renesas RZ/G2 MPU family

Change-Id: I5ca74cddfd0c105a5307de56c3ade7084f9c28d2
Signed-off-by: micbis <michele.bisogno.ct@renesas.com>
Reviewed-on: http://openocd.zylin.com/6250
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-04 17:43:57 +01:00
Tarek BOCHKATI e74eaaacbc tcl/target/stm32f4x: fix hardcoded chip name
Fixes: c945d6e616 ("tcl/target: start using the new TPIU/SWO support")
Change-Id: I4543c9a204f7b4b3b14e6eabc5042653106aff0e
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6277
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-06-04 17:42:17 +01:00