(step/resume cause a NMI after reset) on LM3S6918 -- Michael Schwingen
git-svn-id: svn://svn.berlios.de/openocd/trunk@1008 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- cleaned up headers to match rest of code
- added missing svn props for previously added files
git-svn-id: svn://svn.berlios.de/openocd/trunk@987 b42882b7-edfa-0310-969c-e2dbd0fdcd60
converts a number of 'simple string lookup tables' into NVP tables.
These NVP tables will be used by various commands coming in the next patch.
git-svn-id: svn://svn.berlios.de/openocd/trunk@962 b42882b7-edfa-0310-969c-e2dbd0fdcd60
into the target implementation.
Also target_process_reset() is now simpler and has error handling,
e.g. if assert reset fails, then target_process_reset() will propagate
that error.
cmd_ctx was passed in to examine(), which is wrong - removed that.
git-svn-id: svn://svn.berlios.de/openocd/trunk@887 b42882b7-edfa-0310-969c-e2dbd0fdcd60
from pre/post_reset event scripts. Adding the second parameter was
a mistake seen in retrospect. this gives precise control in post_reset
for *when* the post reset speed is set. The pre_reset event was
added *after* the second parameter to jtag_khz/speed
- the target implementations no longer gets involved in the reset mode
scheme. Either they reset a target into a halted mode or not.
target_process_reset()
detects if the reset halt failed or not.
- tcl target event names are now target_N_name. Mainly internal
at this early stage, but best to get the naming right now.
- added hardcoded reset modes from gdb_server.c. I don't know precisely what
these defaults should be or if it should be made configurable. Perhaps some
hardcoded defaults will do for now and it can be made configurable later.
- bugfix in cortex_m3.c for reset_run_and_xxx?
- issue syntax error upon obsolete argument in target command instead of
printing message that will surely drown in the log
git-svn-id: svn://svn.berlios.de/openocd/trunk@849 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added armv7m dummy cpsr register to stop gdb setting thumb bit
git-svn-id: svn://svn.berlios.de/openocd/trunk@623 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- DCRDR now used to access special core registers - info is currently omitted from the cortex_m3 TRM ARM have told me this is the preferred access method and the docs will be updated soon.
- now checks for User Thread Mode and Thread mode when halted.
- removed repeated function declarations from command.c
- cortex_m3_prepare_reset_halt removed, updated cortex_m3_assert_reset to suit
git-svn-id: svn://svn.berlios.de/openocd/trunk@558 b42882b7-edfa-0310-969c-e2dbd0fdcd60
for a bit more info before I can tell with confidence whether or not
this would have any effect.
- worked on error propagation and output for flash
git-svn-id: svn://svn.berlios.de/openocd/trunk@539 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Wrote a default flash erase check fn which uses CFI's target algorithm
w/fallback to memory reads.
- "flash info" no longer prints erase status as it is stale.
- "flash erase_check" now prints erase status. erase check can take a
*long* time. Work in progress
- arm7/9 with seperate srst & trst now supports reset init/halt
after a power outage. arm7/9 no longer makes any assumptions
about state of target when reset is asserted.
- fixes for srst & trst capable arm7/9 with reset init/halt
- prepare_reset_halt retired. This code needs to be inside
assert_reset anyway
- haven't been able to get stm32 write algorithm to work. Fallback
flash write does work. Haven't found a version of openocd trunk
where this works.
- added target_free_all_working_areas_restore() which can
let be of restoring backups. This is needed when asserting
reset as the target must be assumed to be an unknown state.
Added some comments to working areas API
- str9 reset script fixes
- some guidelines
- fixed dangling callbacks upon reset timeout
git-svn-id: svn://svn.berlios.de/openocd/trunk@536 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- uses packed transfers for 8/16bit read/writes greater than 4bytes
- 8/16bit transfers now use address auto increment
git-svn-id: svn://svn.berlios.de/openocd/trunk@495 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- switch to synchronous halt during connect. This fixes the bug
where poll() was not invoked between halt() and servicing the
'g' register packet
- halt() no longer returns error code when target is already halted, just
logs a warning. Only the halt() implementation can say anything
meaningful about why a halt() failed, so error messages are pushed
up to halt()
- fixed soft_reset_halt infinite loop bug in arm7_9_common.c. The rest
of the implementations are still busted.
- by using USER() instead of command_print() the log gets the
source + line #. Nice.
- no longer invoke exit() if soft_reset_halt fails. A reset can often
fix the problem.
git-svn-id: svn://svn.berlios.de/openocd/trunk@475 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Small cosmetic fixes in the license header to make them all look the
same, fix some typos, update README.
git-svn-id: svn://svn.berlios.de/openocd/trunk@396 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added arch_state to show status of currently selected target
- simplified target->type->arch_state() api.
- clean up telnet output a bit
- fixed GDB output for arch_state
- removed a couple of unecessary exit()'s
- cleaned up error propagation a bit in a few places
git-svn-id: svn://svn.berlios.de/openocd/trunk@332 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- target request handler disabled by default until a target has been registered
git-svn-id: svn://svn.berlios.de/openocd/trunk@259 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Clean up, remove unused variables and code in armv7, cortex_m3 and stellaris code
- Move restore_context from cortex_m3 to armv7m
- Updated halt handling for cortex_m3
git-svn-id: svn://svn.berlios.de/openocd/trunk@206 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on ARM host (thanks to Vincent Palatin)
- various whitespace fixes
- removed various warnings
- add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann)
- fix OpenOCD compilation for various platforms (thanks to Uwe Hermann and Vincent Palatin)
- switched order of JTAG chain examination and validation (examine first, then multiple validation tries even if examination failed)
- added target_request subsystem to handle requests from the target (debug messages and tracepoints implemented, future enhancements might include
semihosting, all ARM7/9 only for now)
- added support for GDB vFlashXXX packets (thanks to Pavel Chromy)
- added support for receiving data via ARM7/9 DCC
- reworked flash writing. the 'flash write' command is now deprecated and replaced by 'flash write_binary' (old syntax and behaviour) and 'flash
write_image' (write image files (bin, hex, elf, s19) to a target).
- added support for AMD/ST/SST 29F400B non-cfi flashes
git-svn-id: svn://svn.berlios.de/openocd/trunk@190 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- ST STM32x flash support added
- cleaned up armv7m and cortex-m3 support, removed luminary specific code
- cortex-m3 16bit read/write added (required for STM32x flash programming)
git-svn-id: svn://svn.berlios.de/openocd/trunk@177 b42882b7-edfa-0310-969c-e2dbd0fdcd60
