Embedded_Projects/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
imi415_t113i
u-boot/MAINTAINERS

1708 lines
44 KiB
Plaintext
Raw Permalink Normal View History

MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
Descriptions of section entries:
P: Person (obsolete)
M: Mail patches to: FullName <address@domain>
MAINTAINERS: add EFI PAYLOAD reviewer Alex suggested to add me as a reviewer for the EFI subsystem. The patch also adds a description for R: entries. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-11-16 19:17:23 +00:00
R: Designated reviewer: FullName <address@domain>
These reviewers should be CCed on patches.
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
L: Mailing list that is relevant to this area
W: Web-page with status/info
Q: Patchwork web based patch tracking system site
T: SCM tree type and location.
Type is one of: git, hg, quilt, stgit, topgit
S: Status, one of the following:
Supported: Someone is actually paid to look after this.
Maintained: Someone actually looks after it.
Orphan: No current maintainer [but maybe you could take the
role as you write your new code].
F: Files and directories with wildcard patterns.
A trailing slash includes all files and subdirectory files.
F: drivers/net/ all files in and below drivers/net
F: drivers/net/* all files in drivers/net, but not below
F: */net/* all files in "any top level directory"/net
One pattern per line. Multiple F: lines acceptable.
N: Files and directories with regex patterns.
N: [^a-z]tegra all files whose path contains the word tegra
One pattern per line. Multiple N: lines acceptable.
scripts/get_maintainer.pl has different behavior for files that
match F: pattern and matches of N: patterns. By default,
get_maintainer will not look at git log history when an F: pattern
match occurs. When an N: match occurs, git log history is used
to also notify the people that have git commit signatures.
X: Files and directories that are NOT maintained, same rules as F:
Files exclusions are tested before file matches.
Can be useful for excluding a specific subdirectory, for instance:
F: net/
X: net/ipv6/
matches all files in and below net excluding net/ipv6/
K: Keyword perl extended regex pattern to match content in a
patch or file. For instance:
K: of_get_profile
matches patches or files that contain "of_get_profile"
K: \b(printk|pr_(info|err))\b
matches patches or files that contain one or more of the words
printk, pr_info or pr_err
One regex pattern per line. Multiple K: lines acceptable.
Note: For the hard of thinking, this list is meant to remain in alphabetical
order. If you could add yourselves to it in alphabetical order that would be
so much easier [Ed]
Maintainers List (try to look for most precise areas first)
-----------------------------------
acpi: Add myself as maintainer Add myself as maintainer of the generic ACPI code, until someone else steps up to take it on. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-01 16:03:09 +00:00
ACPI:
M: Simon Glass <sjg@chromium.org>
S: Maintained
F: cmd/acpi.c
F: lib/acpi/
MAINTAINERS: Add entries for Android A/B and AVB 1. Add myself as Android A/B and AVB maintainer 2. Add Sam Protsenko as Designated reviewer for A/B Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-08-08 12:33:09 +00:00
ANDROID AB
M: Igor Opaniuk <igor.opaniuk@gmail.com>
MAINTAINERS: Fix Sam Protsenko mail Sam works for Linaro again. Use his work e-mail address for ANDROID AB subsystem. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2023-11-07 20:45:04 +00:00
R: Sam Protsenko <semen.protsenko@linaro.org>
MAINTAINERS: Add entries for Android A/B and AVB 1. Add myself as Android A/B and AVB maintainer 2. Add Sam Protsenko as Designated reviewer for A/B Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-08-08 12:33:09 +00:00
S: Maintained
F: cmd/ab_select.c
F: common/android_ab.c
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-24 15:53:44 +00:00
F: doc/android/ab.rst
MAINTAINERS: Add entries for Android A/B and AVB 1. Add myself as Android A/B and AVB maintainer 2. Add Sam Protsenko as Designated reviewer for A/B Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-08-08 12:33:09 +00:00
F: include/android_ab.h
F: test/py/tests/test_android/test_ab.py
ANDROID AVB
M: Igor Opaniuk <igor.opaniuk@gmail.com>
S: Maintained
F: cmd/avb.c
F: common/avb_verify.c
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-24 15:53:44 +00:00
F: doc/android/avb2.rst
MAINTAINERS: Add entries for Android A/B and AVB 1. Add myself as Android A/B and AVB maintainer 2. Add Sam Protsenko as Designated reviewer for A/B Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-08-08 12:33:09 +00:00
F: include/avb_verify.h
F: lib/libavb/
F: test/py/tests/test_android/test_avb.py
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
ARC
M: Alexey Brodkin <alexey.brodkin@synopsys.com>
ARC: Update ARC architecture maintainers Update ARC architecture maintainers and add uboot-snps-arc@synopsys.com mailing list. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-04-17 14:30:40 +00:00
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
ARC: Update ARC architecture maintainers Update ARC architecture maintainers and add uboot-snps-arc@synopsys.com mailing list. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-04-17 14:30:40 +00:00
L: uboot-snps-arc@synopsys.com
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-arc.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/arc/
MAINTAINERS: Add board/synopsys/ As of today 'board/synopsys/' folder contains only Synopsys ARC boards supported by the same people who support 'arch/arc'. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-05-25 13:14:38 +00:00
F: board/synopsys/
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
ARC: clk: introduce HSDK CGU clock driver Synopsys HSDK clock controller generates and supplies clocks to various controllers and peripherals within the SoC. Each clock has assigned identifier and client device tree nodes can use this identifier to specify the clock which they consume. All available clocks are defined as preprocessor macros in the dt-bindings/clock/snps,hsdk-cgu.h header and can be used in device tree sources. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-12-10 18:20:08 +00:00
ARC HSDK CGU CLOCK
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
S: Maintained
L: uboot-snps-arc@synopsys.com
F: drivers/clk/clk-hsdk-cgu.c
F: include/dt-bindings/clock/snps,hsdk-cgu.h
F: doc/device-tree-bindings/clock/snps,hsdk-cgu.txt
MAINTAINERS: bring sections into alphabetic order NETWORK should be after NAND_FLASH. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-07 03:04:29 +00:00
ARC HSDK CREG GPIO
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
S: Maintained
L: uboot-snps-arc@synopsys.com
CREG GPIO: add device tree bindings Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-06-08 14:58:24 +00:00
F: doc/device-tree-bindings/gpio/snps,creg-gpio.txt
MAINTAINERS: bring sections into alphabetic order NETWORK should be after NAND_FLASH. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-07 03:04:29 +00:00
F: drivers/gpio/hsdk-creg-gpio.c
MAINTAINERS: add info about ARC HSDK reset driver Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-10-08 16:29:31 +00:00
ARC HSDK RESET
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
S: Maintained
L: uboot-snps-arc@synopsys.com
F: include/dt-bindings/reset/snps,hsdk-reset.h
F: drivers/reset/reset-hsdk.c
ARC: dwmmc: Adding DesignWare MMC driver support for ARC devboards Add the DM_MMC-compatible DesignWare MMC driver support for Synopsys ARC devboards. It is created to switch ARC devboards to use DM_MMC. It required information such as clocks (Bus Interface Unit clock, Card Interface Unit clock) and SDIO bus width. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-02-25 15:35:28 +00:00
ARC SYNOPSYS DW MMC EXTENSIONS
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
S: Maintained
L: uboot-snps-arc@synopsys.com
F: doc/device-tree-bindings/mmc/snps,dw-mmc.txt
F: drivers/mmc/snps_dw_mmc.c
arm: apple: Add initial support for Apple's M1 SoC Add support for Apple's M1 SoC that is used in "Apple Silicon" Macs. This builds a basic U-Boot that can be used as a payload for the m1n1 boot loader being developed by the Asahi Linux project. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Add MAINTAINERS entry]
2021-10-23 14:58:03 +00:00
APPLE M1 SOC SUPPORT
M: Mark Kettenis <kettenis@openbsd.org>
S: Maintained
F: arch/arm/include/asm/arch-m1/
F: arch/arm/mach-apple/
F: configs/apple_m1_defconfig
F: drivers/iommu/apple_dart.c
MAINTAINERS: Add nvme_apple to Apple SoC section Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
2022-06-14 07:09:08 +00:00
F: drivers/nvme/nvme_apple.c
pci: Add Apple PCIe controller driver This driver supports the PCIe controller on the Apple M1 and M2 SoCs. The code is adapted from the Linux driver. Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2023-01-21 19:27:58 +00:00
F: drivers/pci/pcie_apple.c
phy: Add support for the Apple Type-C PHY This is merely a dummy driver that makes sure the DWC3 XHCI driver finds its reset and PHY controllers. We rely on iBoot to set up the PHY for us. Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2023-07-14 20:21:42 +00:00
F: drivers/phy/phy-apple-atc.c
pinctrl: Add Apple pinctrl driver This driver supports both pin muxing and GPIO support for the pin control logic found on Apple SoCs. Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2021-11-02 17:21:57 +00:00
F: drivers/pinctrl/pinctrl-apple.c
watchdog: Add a driver for the Apple watchdog This driver supports the watchdog timer found on Apple's M1 SoC. On systems that use these SoC, the watchdog timer is the primary way to reboot the system. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-on: Apple M1 Macbook Tested-by: Simon Glass <sjg@chromium.org>
2022-01-12 18:55:15 +00:00
F: drivers/watchdog/apple_wdt.c
arm: apple: Add initial support for Apple's M1 SoC Add support for Apple's M1 SoC that is used in "Apple Silicon" Macs. This builds a basic U-Boot that can be used as a payload for the m1n1 boot loader being developed by the Asahi Linux project. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Add MAINTAINERS entry]
2021-10-23 14:58:03 +00:00
F: include/configs/apple.h
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
ARM
MAINTAINERS: Update ARM entry Fully take over the ARM maintainers entry. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-10 21:33:09 +00:00
M: Tom Rini <trini@konsulko.com>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-arm.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/arm/
arm: Add arch/arm/dts/Makefile specifically to MAINTAINERS In order to reduce the number of people that are cc'd on a patch for simply touching arch/arm/dts/Makefile (which is a big common file) add an entry specifically to MAINTAINERS under the ARM entry. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-07 21:08:11 +00:00
F: arch/arm/dts/Makefile
cmd: add exception command The 'exception' command allows to test exception handling. This implementation supports ARM, x86, RISC-V and the following exceptions: * 'breakpoint' - prefetch abort exception (ARM 32bit only) * 'unaligned' - data abort exception (ARM only) * 'undefined' - undefined instruction exception Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-12-26 16:20:35 +00:00
F: cmd/arm/
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
arm: socfpga: add MAINTAINERS entry Add MAINTAINERS entry. Signed-off-by: Pavel Machek <pavel@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de>
2014-10-09 23:50:22 +00:00
ARM ALTERA SOCFPGA
M: Marek Vasut <marex@denx.de>
socfpga: add Simon Goldschmidt as co-custodian This updates MAINTAINERS and git-mailrc to add me as a co-custodian for socfpga. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2019-03-28 21:27:53 +00:00
M: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
MAINTAINERS, git-mailrc: socfpga: Change co-maintainer to Tien Fong Chee I'm no longer work in Intel, change Intel SoCFPGA co-maintainer to Tien Fong Chee. Signed-off-by: Ley Foon Tan <lftan.linux@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
2021-07-06 02:20:27 +00:00
M: Tien Fong Chee <tien.fong.chee@intel.com>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-socfpga.git
MAINTAINERS: Fix ALTERA SOCFPGA Files Replace arch/arm/cpu/armv7/socfpga/ path with arch/arm/mach-socfpga/ and removed board file path since board/altera has different boards with relevant board maintainers. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Jagan Teki <jagan@openedev.com>
2016-11-25 17:47:28 +00:00
F: arch/arm/mach-socfpga/
sysreset: socfpga: stratix10: add sysreset driver This adds a UCLASS_SYSRESET sysreset driver for socfgpa stratix10. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-07-15 19:47:54 +00:00
F: drivers/sysreset/sysreset_socfpga*
arm: socfpga: add MAINTAINERS entry Add MAINTAINERS entry. Signed-off-by: Pavel Machek <pavel@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de>
2014-10-09 23:50:22 +00:00
MAINTAINERS: Add Amlogic entry Add entry for Amlogic SoC maintained files and the freshly created mailing-list. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-01-30 09:53:10 +00:00
ARM AMLOGIC SOC SUPPORT
MAINTAINERS: Update email of Neil Armstrong My professional e-mail will change and the BayLibre one will bounce after mid-september of 2022. This updates the MAINTAINERS files and adds an entry in the .mailmap file. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-08-16 09:58:08 +00:00
M: Neil Armstrong <neil.armstrong@linaro.org>
MAINTAINERS: Add Amlogic entry Add entry for Amlogic SoC maintained files and the freshly created mailing-list. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-01-30 09:53:10 +00:00
S: Maintained
L: u-boot-amlogic@groups.io
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-amlogic.git
MAINTAINERS: Add Amlogic entry Add entry for Amlogic SoC maintained files and the freshly created mailing-list. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-01-30 09:53:10 +00:00
F: arch/arm/mach-meson/
F: arch/arm/include/asm/arch-meson/
arm/mach-meson: move smc commands in cmd/meson It is incorrect to keep commands in the arch/ folder. Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230110105650.54580-3-avromanov@sberdevices.ru [narmstrong: moved after cmd/sound in index.rst] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-10 10:56:47 +00:00
F: cmd/meson/
clk: create meson directory and move related drivers In order to support the Amlogic G12A clock controller, re-architect the clock files into a meson directory. No functionnal changes. MAINTAINERS entry is also updated. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-02-10 13:54:30 +00:00
F: drivers/clk/meson/
MAINTAINERS: Add Amlogic entry Add entry for Amlogic SoC maintained files and the freshly created mailing-list. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-01-30 09:53:10 +00:00
F: drivers/serial/serial_meson.c
F: drivers/reset/reset-meson.c
F: drivers/i2c/meson_i2c.c
F: drivers/net/phy/meson-gxl.c
F: drivers/adc/meson-saradc.c
F: drivers/phy/meson*
F: drivers/mmc/meson_gx_mmc.c
drivers: introduce Meson Secure Monitor driver This patch adds an implementation of the Meson Secure Monitor driver based on UCLASS_SM. Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/20230921081346.22157-7-avromanov@salutedevices.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-09-21 08:13:39 +00:00
F: drivers/sm/meson-sm.c
MAINTAINERS: Add Amlogic entry Add entry for Amlogic SoC maintained files and the freshly created mailing-list. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-01-30 09:53:10 +00:00
F: drivers/spi/meson_spifc.c
F: drivers/pinctrl/meson/
F: drivers/power/domain/meson-gx-pwrc-vpu.c
F: drivers/video/meson/
watchdog: add amlogic watchdog support Add support for hardware watchdog timer for Amlogic SoCs. This driver has been heavily inspired by his Linux equivalent (meson_gxbb_wdt.c). Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Philippe Boos <pboos@baylibre.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-06-13 14:00:56 +00:00
F: drivers/watchdog/meson_gxbb_wdt.c
MAINTAINERS: Add Amlogic entry Add entry for Amlogic SoC maintained files and the freshly created mailing-list. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-01-30 09:53:10 +00:00
F: include/configs/meson64.h
configs: sei510: rework header and fix userdata size Move android generic config and boot sequence in meson64_android header and fix size of userdata to use all eMMC on SEI510. Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-11 15:33:57 +00:00
F: include/configs/meson64_android.h
board: amlogic: add board doc files to MAINTAINERS Add the recently added reStructuredText board documentation in the appropriate MAINTAINERS files. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-06-11 08:57:39 +00:00
F: doc/board/amlogic/
MAINTAINERS: Add Amlogic entry Add entry for Amlogic SoC maintained files and the freshly created mailing-list. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-01-30 09:53:10 +00:00
N: meson
MAINTAINERS: Add maintainers for Aspeed SoCs Update maintainers for Aspeed SoC platforms. Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
2020-08-03 09:36:05 +00:00
ARM ASPEED
M: Ryan Chen <ryan_chen@aspeedtech.com>
M: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
R: Aspeed BMC SW team <BMC-SW@aspeedtech.com>
MAINTAINERS: aspeed: Add more files and myself as a reviewer Add the rest of the ASPEED drivers that are in tree. Most are obvious, except for ftgmac100 which matches the register layout used in the ASPEED SoC. I am the Linux maintainer for the ASPEED kernel port, and help maintain the fork of u-boot used for OpenBMC, so add myself as a reviewer so I can stay informed about u-boot changes. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
2022-05-19 00:36:33 +00:00
R: Joel Stanley <joel@jms.id.au>
MAINTAINERS: Add maintainers for Aspeed SoCs Update maintainers for Aspeed SoC platforms. Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
2020-08-03 09:36:05 +00:00
S: Maintained
F: arch/arm/mach-aspeed/
F: arch/arm/include/asm/arch-aspeed/
F: board/aspeed/
F: drivers/clk/aspeed/
MAINTAINERS: aspeed: Add more files and myself as a reviewer Add the rest of the ASPEED drivers that are in tree. Most are obvious, except for ftgmac100 which matches the register layout used in the ASPEED SoC. I am the Linux maintainer for the ASPEED kernel port, and help maintain the fork of u-boot used for OpenBMC, so add myself as a reviewer so I can stay informed about u-boot changes. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
2022-05-19 00:36:33 +00:00
F: drivers/crypto/aspeed/
F: drivers/gpio/gpio-aspeed.c
F: drivers/i2c/ast_i2c.[ch]
F: drivers/mmc/aspeed_sdhci.c
F: drivers/net/aspeed_mdio.c
F: drivers/net/ftgmac100.[ch]
MAINTAINERS: Add maintainers for Aspeed SoCs Update maintainers for Aspeed SoC platforms. Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
2020-08-03 09:36:05 +00:00
F: drivers/pinctrl/aspeed/
MAINTAINERS: aspeed: Add more files and myself as a reviewer Add the rest of the ASPEED drivers that are in tree. Most are obvious, except for ftgmac100 which matches the register layout used in the ASPEED SoC. I am the Linux maintainer for the ASPEED kernel port, and help maintain the fork of u-boot used for OpenBMC, so add myself as a reviewer so I can stay informed about u-boot changes. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
2022-05-19 00:36:33 +00:00
F: drivers/pwm/pwm-aspeed.c
F: drivers/ram/aspeed/
F: drivers/reset/reset-ast2500.c
F: drivers/watchdog/ast_wdt.c
MAINTAINERS: Add maintainers for Aspeed SoCs Update maintainers for Aspeed SoC platforms. Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
2020-08-03 09:36:05 +00:00
N: aspeed
MAINTAINERS: Update info for Raspberry Pi Add RPi config files and custodian repository. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-26 10:23:16 +00:00
ARM BROADCOM BCM283X / BCM27XX
rpi: Make Matthias maintainer Matthias Brugger agreed to take over maintainership from me for the Raspberry Pi tree. Add him to the MAINTAINERS file instead. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-14 13:37:59 +00:00
M: Matthias Brugger <mbrugger@suse.com>
MAINTAINERS: add RaspberryPi co-maintainer Peter accpeted to step up as a co-maintainer for the RPis. Reflect that in the corresponding MAINTAINERS files. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
2022-11-30 11:57:49 +00:00
M: Peter Robinson <pbrobinson@gmail.com>
MAINTAINERS: Take over BCM2835 maintainership It seems as if I have more interest in BCM2835 support than most others, so I'll bite the bullet and declare myself maintainer. It'd be a shame to leave that platform orphaned. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-25 11:05:54 +00:00
S: Maintained
MAINTAINERS: Add info for bcm283x The bcm283x has grown in files, which was not reflected in the MAINTAINERS file. Fix this by adding the missing entries. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-27 16:41:06 +00:00
F: arch/arm/dts/bcm283*
rpi: remove redundant board files Now that rpi_*defconfig and Kconfig (rather than the config header file) provide the identity of the build, we don't need to separate config headers and board directories for each RPi variant. Set CONFIG_SYS_BOARD and CONFIG_SYS_CONFIG_NAME so that we can get rid of the duplication. This requires a tiny number of extra ifdefs in the config header. The only disadvantage of this approach is that the $board/$board_name environment variables aren't as descriptive as they used to be. This isn't really an issue because those only exist to allow scripts to create DTB filenames at runtime. However, the RPi board code already sets $fdtfile to something more accurate based on FW-reported board ID anyway. While at it, unify some Kconfig select options, and add a MAINTAINERS entry for bcm283x too. Partially-suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-05 02:00:41 +00:00
F: arch/arm/mach-bcm283x/
MAINTAINERS: Add info for bcm283x The bcm283x has grown in files, which was not reflected in the MAINTAINERS file. Fix this by adding the missing entries. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-27 16:41:06 +00:00
F: board/raspberrypi/
rpi: remove redundant board files Now that rpi_*defconfig and Kconfig (rather than the config header file) provide the identity of the build, we don't need to separate config headers and board directories for each RPi variant. Set CONFIG_SYS_BOARD and CONFIG_SYS_CONFIG_NAME so that we can get rid of the duplication. This requires a tiny number of extra ifdefs in the config header. The only disadvantage of this approach is that the $board/$board_name environment variables aren't as descriptive as they used to be. This isn't really an issue because those only exist to allow scripts to create DTB filenames at runtime. However, the RPi board code already sets $fdtfile to something more accurate based on FW-reported board ID anyway. While at it, unify some Kconfig select options, and add a MAINTAINERS entry for bcm283x too. Partially-suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-05 02:00:41 +00:00
F: drivers/gpio/bcm2835_gpio.c
F: drivers/mmc/bcm2835_sdhci.c
mmc: Add bcm2835 sdhost controller The BCM2835 family of SoCs has 2 different SD controllers: One based on the SDHCI spec and a custom, home-grown one. This patch implements a driver for the latter based on the Linux driver. This is needed so that we can make use of device trees that assume driver presence of both SD controllers. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-23 17:05:22 +00:00
F: drivers/mmc/bcm2835_sdhost.c
rpi: remove redundant board files Now that rpi_*defconfig and Kconfig (rather than the config header file) provide the identity of the build, we don't need to separate config headers and board directories for each RPi variant. Set CONFIG_SYS_BOARD and CONFIG_SYS_CONFIG_NAME so that we can get rid of the duplication. This requires a tiny number of extra ifdefs in the config header. The only disadvantage of this approach is that the $board/$board_name environment variables aren't as descriptive as they used to be. This isn't really an issue because those only exist to allow scripts to create DTB filenames at runtime. However, the RPi board code already sets $fdtfile to something more accurate based on FW-reported board ID anyway. While at it, unify some Kconfig select options, and add a MAINTAINERS entry for bcm283x too. Partially-suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-05 02:00:41 +00:00
F: drivers/serial/serial_bcm283x_mu.c
bcm2835_pl011_serial: Add BCM2835 specific serial driver On bcm2835 we need to ensure we only access serial devices that are muxed to the serial output pins of the pin header. To achieve this for the pl011 device, add a bcm2835 specific pl011 wrapper device that does this check but otherwise behaves like a pl011 device. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-25 11:05:55 +00:00
F: drivers/serial/serial_bcm283x_pl011.c
rpi: remove redundant board files Now that rpi_*defconfig and Kconfig (rather than the config header file) provide the identity of the build, we don't need to separate config headers and board directories for each RPi variant. Set CONFIG_SYS_BOARD and CONFIG_SYS_CONFIG_NAME so that we can get rid of the duplication. This requires a tiny number of extra ifdefs in the config header. The only disadvantage of this approach is that the $board/$board_name environment variables aren't as descriptive as they used to be. This isn't really an issue because those only exist to allow scripts to create DTB filenames at runtime. However, the RPi board code already sets $fdtfile to something more accurate based on FW-reported board ID anyway. While at it, unify some Kconfig select options, and add a MAINTAINERS entry for bcm283x too. Partially-suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-05 02:00:41 +00:00
F: drivers/video/bcm2835.c
F: include/dm/platform_data/serial_bcm283x_mu.h
MAINTAINERS: Add info for bcm283x The bcm283x has grown in files, which was not reflected in the MAINTAINERS file. Fix this by adding the missing entries. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-27 16:41:06 +00:00
F: include/dt-bindings/pinctrl/bcm2835.h
bcm283x: Add pinctrl driver The bcm283x family of SoCs have a GPIO controller that also acts as pinctrl controller. This patch introduces a new pinctrl driver that can actually properly mux devices into their device tree defined pin states and is now the primary owner of the gpio device. The previous GPIO driver gets moved into a subdevice of the pinctrl driver, bound to the same OF node. That way whenever a device asks for pinctrl support, it gets it automatically from the pinctrl driver and GPIO support is still available in the normal command line phase. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-23 17:05:21 +00:00
F: drivers/pinctrl/broadcom/
MAINTAINERS: Update info for Raspberry Pi Add RPi config files and custodian repository. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-26 10:23:16 +00:00
F: configs/rpi_*
T: git https://source.denx.de/u-boot/custodians/u-boot-arm.git
rpi: remove redundant board files Now that rpi_*defconfig and Kconfig (rather than the config header file) provide the identity of the build, we don't need to separate config headers and board directories for each RPi variant. Set CONFIG_SYS_BOARD and CONFIG_SYS_CONFIG_NAME so that we can get rid of the duplication. This requires a tiny number of extra ifdefs in the config header. The only disadvantage of this approach is that the $board/$board_name environment variables aren't as descriptive as they used to be. This isn't really an issue because those only exist to allow scripts to create DTB filenames at runtime. However, the RPi board code already sets $fdtfile to something more accurate based on FW-reported board ID anyway. While at it, unify some Kconfig select options, and add a MAINTAINERS entry for bcm283x too. Partially-suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-05 02:00:41 +00:00
arm: bcmbca: introduce the bcmbca architecture and 47622 SOC This is the initial support for Broadcom's ARM-based 47622 SOC. In this change, our first SOC is an armv7 platform called 47622. The initial support includes a bare-bone implementation and dts with ARM PL011 uart. The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board related code is in board/broadcom/bcmba. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Kursad Oney <kursad.oney@broadcom.com> Signed-off-by: Anand Gore <anand.gore@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-05-09 16:28:02 +00:00
ARM BROADCOM BCMBCA
M: Anand Gore <anand.gore@broadcom.com>
M: William Zhang <william.zhang@broadcom.com>
M: Kursad Oney <kursad.oney@broadcom.com>
M: Joel Peshkin <joel.peshkin@broadcom.com>
MAINTAINERS: Add BCM63158 maintainer to BCMBCA entry Since ARCH_BCM63158 SoC support is merged into ARCH_BCMBCA, add BCM63158 maintainer Philippe to bcmbca maintainer list. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-08-22 18:19:47 +00:00
M: Philippe Reynes <philippe.reynes@softathome.com>
arm: bcmbca: introduce the bcmbca architecture and 47622 SOC This is the initial support for Broadcom's ARM-based 47622 SOC. In this change, our first SOC is an armv7 platform called 47622. The initial support includes a bare-bone implementation and dts with ARM PL011 uart. The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board related code is in board/broadcom/bcmba. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Kursad Oney <kursad.oney@broadcom.com> Signed-off-by: Anand Gore <anand.gore@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-05-09 16:28:02 +00:00
S: Maintained
F: arch/arm/mach-bcmbca/
F: board/broadcom/bcmbca/
arm: bcmbca: add bcm63178 SoC support BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-08-01 18:39:21 +00:00
N: bcmbca
N: bcm[9]?47622
arm: bcmbca: add bcm4908 SoC support BCM4908 is a Broadcom B53 based WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux git repository so the dts and dtsi files are stripped down version of linux copies with mininum blocks needed by u-boot. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-06 01:34:03 +00:00
N: bcm[9]?4908
arm: bcmbca: add bcm4912 SoC support BCM4912 is a Broadcom B53 based WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-06 01:34:01 +00:00
N: bcm[9]?4912
arm: bcmbca: add bcm63138 SoC support BCM63138 is an ARM A9 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory, ARM A9 global timer and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are stripped down version of linux copies with mininum blocks needed by u-boot. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. This patch applies on top of the my previous patch [1]. [1] https://lists.denx.de/pipermail/u-boot/2022-August/490570.html Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-08-06 01:25:13 +00:00
N: bcm[9]?63138
arm: bcmbca: add bcm63146 SoC support BCM63146 is a Broadcom B53 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-06 01:34:00 +00:00
N: bcm[9]?63146
arm: bcmbca: add bcm63148 SoC support BCM63148 is an Broadcom B15 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-08-01 18:39:25 +00:00
N: bcm[9]?63148
arm: bcmbca: add bcm63158 SoC support under CONFIG_ARCH_BCMBCA BCM63158 is a Broadcom B53 based DSL Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under CONFIG_BCM63158 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-08-22 18:19:44 +00:00
N: bcm[9]?63158
arm: bcmbca: add bcm63178 SoC support BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-08-01 18:39:21 +00:00
N: bcm[9]?63178
arm: bcmbca: add bcm6756 SoC support BCM6756 is an ARM A7 based WLAN Gateway and Access Point Broadband SoC. It is part of the BCA(Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-08-01 18:39:24 +00:00
N: bcm[9]?6756
arm: bcmbca: add bcm6813 SoC support BCM6813 is a Broadcom B53 based PON and WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-06 01:34:02 +00:00
N: bcm[9]?6813
arm: bcmbca: add bcm6846 SoC support BCM6846 is an ARM A7 based PON Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-08-01 18:39:22 +00:00
N: bcm[9]?6846
arm: bcmbca: add bcm6855 SoC support under CONFIG_ARCH_BCMBCA BCM6855 is a Broadcom ARM A7 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6855 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL101 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-08-22 18:49:06 +00:00
N: bcm[9]?6855
arm: bcmbca: add bcm6856 SoC support under CONFIG_ARCH_BCMBCA BCM6856 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under CONFIG_BCM6856 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-08-22 18:31:41 +00:00
N: bcm[9]?6856
arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCA BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6858 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and the original dts is updated with the one from linux next git repository. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-08-22 18:39:43 +00:00
N: bcm[9]?6858
arm: bcmbca: add bcm6878 SoC support BCM6878 is an ARM A7 based PON Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-08-01 18:39:23 +00:00
N: bcm[9]?6878
arm: bcmbca: introduce the bcmbca architecture and 47622 SOC This is the initial support for Broadcom's ARM-based 47622 SOC. In this change, our first SOC is an armv7 platform called 47622. The initial support includes a bare-bone implementation and dts with ARM PL011 uart. The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board related code is in board/broadcom/bcmba. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Kursad Oney <kursad.oney@broadcom.com> Signed-off-by: Anand Gore <anand.gore@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-05-09 16:28:02 +00:00
board: arm: Add support for Broadcom BCM7445 Add support for loading U-Boot on the Broadcom 7445 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Florian Fainelli <f.fainelli@gmail.com>
2018-06-08 21:59:45 +00:00
ARM BROADCOM BCMSTB
M: Thomas Fitzsimmons <fitzsim@fitzsim.org>
S: Maintained
F: arch/arm/mach-bcmstb/
F: board/broadcom/bcmstb/
board: arm: Add support for Broadcom BCM7260 Add support for loading U-Boot on the Broadcom 7260 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com>
2018-08-22 22:37:55 +00:00
F: configs/bcm7*_defconfig
board: arm: Add support for Broadcom BCM7445 Add support for loading U-Boot on the Broadcom 7445 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Florian Fainelli <f.fainelli@gmail.com>
2018-06-08 21:59:45 +00:00
F: doc/README.bcm7xxx
F: drivers/mmc/bcmstb_sdhci.c
F: drivers/spi/bcmstb_spi.c
MAINTAINERS, git-mailrc: cortina: add Custodian for Cortina Access Inc. Assign Alex Nemirovsky as custodian for all Cortina Access (CA) for ARM and MIPS based SoCs. Currently Cortina Access CAxxxx family of SoCs support both ARM and MIPS ISA. Drivers have cross platform support for both architectures. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-01-30 20:34:54 +00:00
ARM CORTINA ACCESS CAxxxx
M: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
S: Supported
F: board/cortina/common/
F: drivers/gpio/cortina_gpio.c
F: drivers/watchdog/cortina_wdt.c
F: drivers/serial/serial_cortina.c
led: led_cortina: Add CAxxx LED support Add Cortina Access LED controller support for CAxxxx SOCs Signed-off-by: Jway Lin <jway.lin@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Simon Glass <sjg@chromium.org> Add head file fixed link error and remove unused flashing function Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-01 04:08:06 +00:00
F: drivers/led/led_cortina.c
mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs Initial DesignWare based DM support for Cortina Access CAxxxx SoCs. Signed-off-by: Arthur Li <arthur.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-21 02:19:35 +00:00
F: drivers/mmc/ca_dw_mmc.c
spi: ca_sflash: Add CAxxxx SPI Flash Controller Add SPI Flash controller driver for Cortina Access CAxxxx SoCs Signed-off-by: Pengpeng Chen <pengpeng.chen@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Vignesh R <vigneshr@ti.com> CC: Tom Rini <trini@konsulko.com> [jagan: rebase on master] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-30 19:52:45 +00:00
F: drivers/spi/ca_sflash.c
i2c: i2c-cortina: added CAxxxx I2C support Add I2C controller support for Cortina Access CAxxxx SoCs Signed-off-by: Arthur Li <arthur.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> hs: fixed build error, add include log.h
2020-06-01 19:56:31 +00:00
F: drivers/i2c/i2c-cortina.c
F: drivers/i2c/i2c-cortina.h
mtd: rawnand: cortina_nand: Add Cortina CAxxxx SoC support Add Cortina Access parallel Nand support for CAxxxx SOCs Signed-off-by: Kate Liu <kate.liu@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Tom Rini <trini@konsulko.com> CC: Scott Wood <oss@buserror.net> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-12-11 21:46:12 +00:00
F: drivers/mtd/nand/raw/cortina_nand.c
F: drivers/mtd/nand/raw/cortina_nand.h
net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs Add Cortina Access Ethernet device driver for CAxxxx SoCs. This driver supports both legacy and DM_ETH network models. Signed-off-by: Aaron Tseng <aaron.tseng@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> Signed-off-by: Abbie Chang <abbie.chang@cortina-access.com> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Abbie Chang <abbie.chang@Cortina-Access.com> CC: Tom Rini <trini@konsulko.com>
2021-01-14 21:34:11 +00:00
F: drivers/net/cortina_ni.c
F: drivers/net/cortina_ni.h
net: phy: ca_phy: Add driver for CAxxxx SoCs Add phy driver support for MACs embedded inside Cortina Access SoCs Signed-off-by: Abbie Chang <abbie.chang@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Tom Rini <trini@konsulko.com> CC: Aaron Tseng <aaron.tseng@cortina-access.com> Moved out PHY specific code out of Cortina NI Ethernet driver and into a Cortina Access PHY interface driver
2021-01-14 21:34:12 +00:00
F: drivers/net/phy/ca_phy.c
board: presidio: Add Parallel NAND support Set environment for Nand flash (U-boot 2020.04): - add nand flash in the device tree - add new default configuration file for G3 using parallel Nand - set nand parameters in presidio_asic.h Signed-off-by: Kate Liu <kate.liu@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-12-11 21:46:13 +00:00
F: configs/cortina_presidio-asic-pnand_defconfig
MAINTAINERS, git-mailrc: cortina: add Custodian for Cortina Access Inc. Assign Alex Nemirovsky as custodian for all Cortina Access (CA) for ARM and MIPS based SoCs. Currently Cortina Access CAxxxx family of SoCs support both ARM and MIPS ISA. Drivers have cross platform support for both architectures. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-01-30 20:34:54 +00:00
arm_ffa: introduce Arm FF-A support Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0 The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1] describes interfaces (ABIs) that standardize communication between the Secure World and Normal World leveraging TrustZone technology. This driver uses 64-bit registers as per SMCCCv1.2 spec and comes on top of the SMCCC layer. The driver provides the FF-A ABIs needed for querying the FF-A framework from the secure world. The driver uses SMC32 calling convention which means using the first 32-bit data of the Xn registers. All supported ABIs come with their 32-bit version except FFA_RXTX_MAP which has 64-bit version supported. Both 32-bit and 64-bit direct messaging are supported which allows both 32-bit and 64-bit clients to use the FF-A bus. FF-A is a discoverable bus and similar to architecture features. FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed by the PSCI driver. Clients are able to probe then use the FF-A bus by calling the DM class searching APIs (e.g: uclass_first_device). The Secure World is considered as one entity to communicate with using the FF-A bus. FF-A communication is handled by one device and one instance (the bus). This FF-A driver takes care of all the interactions between Normal world and Secure World. The driver exports its operations to be used by upper layers. Exported operations: - ffa_partition_info_get - ffa_sync_send_receive - ffa_rxtx_unmap Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c). Arm specific methods are implemented in the Arm driver (arm-ffa.c). For more details please refer to the driver documentation [2]. [1]: https://developer.arm.com/documentation/den0077/latest/ [2]: doc/arch/arm64.ffa.rst Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Tom Rini <trini@konsulko.com> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-04 13:33:40 +00:00
ARM FF-A
M: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
S: Maintained
arm_ffa: introduce sandbox FF-A support Emulate Secure World's FF-A ABIs and allow testing U-Boot FF-A support Features of the sandbox FF-A support: - Introduce an FF-A emulator - Introduce an FF-A device driver for FF-A comms with emulated Secure World - Provides test methods allowing to read the status of the inspected ABIs The sandbox FF-A emulator supports only 64-bit direct messaging. Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-04 13:33:41 +00:00
F: arch/sandbox/include/asm/sandbox_arm_ffa.h
F: arch/sandbox/include/asm/sandbox_arm_ffa_priv.h
arm_ffa: introduce armffa command Provide armffa command showcasing the use of the U-Boot FF-A support armffa is a command showcasing how to invoke FF-A operations. This provides a guidance to the client developers on how to call the FF-A bus interfaces. The command also allows to gather secure partitions information and ping these partitions. The command is also helpful in testing the communication with secure partitions. For more details please refer to the command documentation [1]. A Sandbox test is provided for the armffa command. [1]: doc/usage/cmd/armffa.rst Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-04 13:33:43 +00:00
F: cmd/armffa.c
arm_ffa: introduce Arm FF-A support Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0 The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1] describes interfaces (ABIs) that standardize communication between the Secure World and Normal World leveraging TrustZone technology. This driver uses 64-bit registers as per SMCCCv1.2 spec and comes on top of the SMCCC layer. The driver provides the FF-A ABIs needed for querying the FF-A framework from the secure world. The driver uses SMC32 calling convention which means using the first 32-bit data of the Xn registers. All supported ABIs come with their 32-bit version except FFA_RXTX_MAP which has 64-bit version supported. Both 32-bit and 64-bit direct messaging are supported which allows both 32-bit and 64-bit clients to use the FF-A bus. FF-A is a discoverable bus and similar to architecture features. FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed by the PSCI driver. Clients are able to probe then use the FF-A bus by calling the DM class searching APIs (e.g: uclass_first_device). The Secure World is considered as one entity to communicate with using the FF-A bus. FF-A communication is handled by one device and one instance (the bus). This FF-A driver takes care of all the interactions between Normal world and Secure World. The driver exports its operations to be used by upper layers. Exported operations: - ffa_partition_info_get - ffa_sync_send_receive - ffa_rxtx_unmap Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c). Arm specific methods are implemented in the Arm driver (arm-ffa.c). For more details please refer to the driver documentation [2]. [1]: https://developer.arm.com/documentation/den0077/latest/ [2]: doc/arch/arm64.ffa.rst Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Tom Rini <trini@konsulko.com> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-04 13:33:40 +00:00
F: doc/arch/arm64.ffa.rst
arm_ffa: introduce armffa command Provide armffa command showcasing the use of the U-Boot FF-A support armffa is a command showcasing how to invoke FF-A operations. This provides a guidance to the client developers on how to call the FF-A bus interfaces. The command also allows to gather secure partitions information and ping these partitions. The command is also helpful in testing the communication with secure partitions. For more details please refer to the command documentation [1]. A Sandbox test is provided for the armffa command. [1]: doc/usage/cmd/armffa.rst Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-04 13:33:43 +00:00
F: doc/usage/cmd/armffa.rst
arm_ffa: introduce Arm FF-A support Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0 The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1] describes interfaces (ABIs) that standardize communication between the Secure World and Normal World leveraging TrustZone technology. This driver uses 64-bit registers as per SMCCCv1.2 spec and comes on top of the SMCCC layer. The driver provides the FF-A ABIs needed for querying the FF-A framework from the secure world. The driver uses SMC32 calling convention which means using the first 32-bit data of the Xn registers. All supported ABIs come with their 32-bit version except FFA_RXTX_MAP which has 64-bit version supported. Both 32-bit and 64-bit direct messaging are supported which allows both 32-bit and 64-bit clients to use the FF-A bus. FF-A is a discoverable bus and similar to architecture features. FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed by the PSCI driver. Clients are able to probe then use the FF-A bus by calling the DM class searching APIs (e.g: uclass_first_device). The Secure World is considered as one entity to communicate with using the FF-A bus. FF-A communication is handled by one device and one instance (the bus). This FF-A driver takes care of all the interactions between Normal world and Secure World. The driver exports its operations to be used by upper layers. Exported operations: - ffa_partition_info_get - ffa_sync_send_receive - ffa_rxtx_unmap Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c). Arm specific methods are implemented in the Arm driver (arm-ffa.c). For more details please refer to the driver documentation [2]. [1]: https://developer.arm.com/documentation/den0077/latest/ [2]: doc/arch/arm64.ffa.rst Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Tom Rini <trini@konsulko.com> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-04 13:33:40 +00:00
F: drivers/firmware/arm-ffa/
F: include/arm_ffa.h
arm_ffa: introduce armffa command Provide armffa command showcasing the use of the U-Boot FF-A support armffa is a command showcasing how to invoke FF-A operations. This provides a guidance to the client developers on how to call the FF-A bus interfaces. The command also allows to gather secure partitions information and ping these partitions. The command is also helpful in testing the communication with secure partitions. For more details please refer to the command documentation [1]. A Sandbox test is provided for the armffa command. [1]: doc/usage/cmd/armffa.rst Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-04 13:33:43 +00:00
F: test/cmd/armffa.c
arm_ffa: introduce sandbox test cases for UCLASS_FFA Add functional test cases for the FF-A support These tests rely on the FF-A sandbox emulator and FF-A sandbox driver which help in inspecting the FF-A communication. Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-04 13:33:42 +00:00
F: test/dm/ffa.c
arm_ffa: introduce Arm FF-A support Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0 The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1] describes interfaces (ABIs) that standardize communication between the Secure World and Normal World leveraging TrustZone technology. This driver uses 64-bit registers as per SMCCCv1.2 spec and comes on top of the SMCCC layer. The driver provides the FF-A ABIs needed for querying the FF-A framework from the secure world. The driver uses SMC32 calling convention which means using the first 32-bit data of the Xn registers. All supported ABIs come with their 32-bit version except FFA_RXTX_MAP which has 64-bit version supported. Both 32-bit and 64-bit direct messaging are supported which allows both 32-bit and 64-bit clients to use the FF-A bus. FF-A is a discoverable bus and similar to architecture features. FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed by the PSCI driver. Clients are able to probe then use the FF-A bus by calling the DM class searching APIs (e.g: uclass_first_device). The Secure World is considered as one entity to communicate with using the FF-A bus. FF-A communication is handled by one device and one instance (the bus). This FF-A driver takes care of all the interactions between Normal world and Secure World. The driver exports its operations to be used by upper layers. Exported operations: - ffa_partition_info_get - ffa_sync_send_receive - ffa_rxtx_unmap Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c). Arm specific methods are implemented in the Arm driver (arm-ffa.c). For more details please refer to the driver documentation [2]. [1]: https://developer.arm.com/documentation/den0077/latest/ [2]: doc/arch/arm64.ffa.rst Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Tom Rini <trini@konsulko.com> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-04 13:33:40 +00:00
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
ARM FREESCALE IMX
M: Stefano Babic <sbabic@denx.de>
MAINTAINERS: imx: Change Fabio's email address I prefer to use my personal email address for U-Boot related work. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-01-21 16:29:54 +00:00
M: Fabio Estevam <festevam@gmail.com>
MAINTAINERS: update NXP i.MX mail list address Update NXP i.MX mail list address Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-15 12:07:02 +00:00
R: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-imx.git
MAINTAINERS: Add some missing directories or files In a few cases we have MAINTAINERS entries that are missing obvious paths or files. Typically this means a board directory that did not list itself, but in a few cases we have a Kconfig file or similar. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-07-18 23:33:34 +00:00
F: arch/Kconfig.nxp
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/arm/cpu/arm1136/mx*/
F: arch/arm/cpu/arm926ejs/mx*/
F: arch/arm/cpu/armv7/vf610/
MAINTAINERS: Add imx dts files to i.MX maintainers list Add imx dts files to the MAINTAINERS file list, so that i.MX devicetree related patches can be properly sent to the i.MX folks. Reported-by: Adam Ford <aford173@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-05-10 12:23:53 +00:00
F: arch/arm/dts/*imx*
imx: reorganize IMX code as other SOCs Change is consistent with other SOCs and it is in preparation for adding SOMs. SOC's related files are moved from cpu/ to mach-imx/<SOC>. This change is also coherent with the structure in kernel. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@nxp.com> CC: Akshay Bhat <akshaybhat@timesys.com> CC: Ken Lin <Ken.Lin@advantech.com.tw> CC: Marek Vasut <marek.vasut@gmail.com> CC: Heiko Schocher <hs@denx.de> CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com> CC: Christian Gmeiner <christian.gmeiner@gmail.com> CC: Stefan Roese <sr@denx.de> CC: Patrick Bruenn <p.bruenn@beckhoff.com> CC: Troy Kisky <troy.kisky@boundarydevices.com> CC: Nikita Kiryanov <nikita@compulab.co.il> CC: Otavio Salvador <otavio@ossystems.com.br> CC: "Eric Bénard" <eric@eukrea.com> CC: Jagan Teki <jagan@amarulasolutions.com> CC: Ye Li <ye.li@nxp.com> CC: Peng Fan <peng.fan@nxp.com> CC: Adrian Alonso <adrian.alonso@nxp.com> CC: Alison Wang <b18965@freescale.com> CC: Tim Harvey <tharvey@gateworks.com> CC: Martin Donnelly <martin.donnelly@ge.com> CC: Marcin Niestroj <m.niestroj@grinn-global.com> CC: Lukasz Majewski <lukma@denx.de> CC: Adam Ford <aford173@gmail.com> CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr> CC: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Soeren Moch <smoch@web.de> CC: Richard Hu <richard.hu@technexion.com> CC: Wig Cheng <wig.cheng@technexion.com> CC: Vanessa Maegima <vanessa.maegima@nxp.com> CC: Max Krummenacher <max.krummenacher@toradex.com> CC: Stefan Agner <stefan.agner@toradex.com> CC: Markus Niebel <Markus.Niebel@tq-group.com> CC: Breno Lima <breno.lima@nxp.com> CC: Francesco Montefoschi <francesco.montefoschi@udoo.org> CC: Jaehoon Chung <jh80.chung@samsung.com> CC: Scott Wood <oss@buserror.net> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Anatolij Gustschin <agust@denx.de> CC: Simon Glass <sjg@chromium.org> CC: "Andrew F. Davis" <afd@ti.com> CC: "Łukasz Majewski" <l.majewski@samsung.com> CC: Patrice Chotard <patrice.chotard@st.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Hans de Goede <hdegoede@redhat.com> CC: Masahiro Yamada <yamada.masahiro@socionext.com> CC: Stephen Warren <swarren@nvidia.com> CC: Andre Przywara <andre.przywara@arm.com> CC: "Álvaro Fernández Rojas" <noltari@gmail.com> CC: York Sun <york.sun@nxp.com> CC: Xiaoliang Yang <xiaoliang.yang@nxp.com> CC: Chen-Yu Tsai <wens@csie.org> CC: George McCollister <george.mccollister@gmail.com> CC: Sven Ebenfeld <sven.ebenfeld@gmail.com> CC: Filip Brozovic <fbrozovic@gmail.com> CC: Petr Kulhavy <brain@jikos.cz> CC: Eric Nelson <eric@nelint.com> CC: Bai Ping <ping.bai@nxp.com> CC: Anson Huang <Anson.Huang@nxp.com> CC: Sanchayan Maity <maitysanchayan@gmail.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Patrick Delaunay <patrick.delaunay@st.com> CC: Gary Bisson <gary.bisson@boundarydevices.com> CC: Alexander Graf <agraf@suse.de> CC: u-boot@lists.denx.de Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-06-29 08:16:06 +00:00
F: arch/arm/mach-imx/
MAINTAINERS: Update file list for ARM Freescale IMX The MAINTAINERS file currently lists files in arch/arm/include/asm/arch-imx/ being part of the IMX maintainers purview, however the arch/arm/include/asm/ directory also contains the directories arch-imx8, arch-imx8m, arch-imx8ulp and arch-imxrt which would also appear to be relevant to the team. Tweak the entry to cover these directories so that tools like get_maintainers.pl will suggest relevant maintainers when making changes just in these directories. Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
2022-07-21 13:47:56 +00:00
F: arch/arm/include/asm/arch-imx*/
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/arm/include/asm/arch-mx*/
F: arch/arm/include/asm/arch-vf610/
imx: reorganize IMX code as other SOCs Change is consistent with other SOCs and it is in preparation for adding SOMs. SOC's related files are moved from cpu/ to mach-imx/<SOC>. This change is also coherent with the structure in kernel. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@nxp.com> CC: Akshay Bhat <akshaybhat@timesys.com> CC: Ken Lin <Ken.Lin@advantech.com.tw> CC: Marek Vasut <marek.vasut@gmail.com> CC: Heiko Schocher <hs@denx.de> CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com> CC: Christian Gmeiner <christian.gmeiner@gmail.com> CC: Stefan Roese <sr@denx.de> CC: Patrick Bruenn <p.bruenn@beckhoff.com> CC: Troy Kisky <troy.kisky@boundarydevices.com> CC: Nikita Kiryanov <nikita@compulab.co.il> CC: Otavio Salvador <otavio@ossystems.com.br> CC: "Eric Bénard" <eric@eukrea.com> CC: Jagan Teki <jagan@amarulasolutions.com> CC: Ye Li <ye.li@nxp.com> CC: Peng Fan <peng.fan@nxp.com> CC: Adrian Alonso <adrian.alonso@nxp.com> CC: Alison Wang <b18965@freescale.com> CC: Tim Harvey <tharvey@gateworks.com> CC: Martin Donnelly <martin.donnelly@ge.com> CC: Marcin Niestroj <m.niestroj@grinn-global.com> CC: Lukasz Majewski <lukma@denx.de> CC: Adam Ford <aford173@gmail.com> CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr> CC: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Soeren Moch <smoch@web.de> CC: Richard Hu <richard.hu@technexion.com> CC: Wig Cheng <wig.cheng@technexion.com> CC: Vanessa Maegima <vanessa.maegima@nxp.com> CC: Max Krummenacher <max.krummenacher@toradex.com> CC: Stefan Agner <stefan.agner@toradex.com> CC: Markus Niebel <Markus.Niebel@tq-group.com> CC: Breno Lima <breno.lima@nxp.com> CC: Francesco Montefoschi <francesco.montefoschi@udoo.org> CC: Jaehoon Chung <jh80.chung@samsung.com> CC: Scott Wood <oss@buserror.net> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Anatolij Gustschin <agust@denx.de> CC: Simon Glass <sjg@chromium.org> CC: "Andrew F. Davis" <afd@ti.com> CC: "Łukasz Majewski" <l.majewski@samsung.com> CC: Patrice Chotard <patrice.chotard@st.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Hans de Goede <hdegoede@redhat.com> CC: Masahiro Yamada <yamada.masahiro@socionext.com> CC: Stephen Warren <swarren@nvidia.com> CC: Andre Przywara <andre.przywara@arm.com> CC: "Álvaro Fernández Rojas" <noltari@gmail.com> CC: York Sun <york.sun@nxp.com> CC: Xiaoliang Yang <xiaoliang.yang@nxp.com> CC: Chen-Yu Tsai <wens@csie.org> CC: George McCollister <george.mccollister@gmail.com> CC: Sven Ebenfeld <sven.ebenfeld@gmail.com> CC: Filip Brozovic <fbrozovic@gmail.com> CC: Petr Kulhavy <brain@jikos.cz> CC: Eric Nelson <eric@nelint.com> CC: Bai Ping <ping.bai@nxp.com> CC: Anson Huang <Anson.Huang@nxp.com> CC: Sanchayan Maity <maitysanchayan@gmail.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Patrick Delaunay <patrick.delaunay@st.com> CC: Gary Bisson <gary.bisson@boundarydevices.com> CC: Alexander Graf <agraf@suse.de> CC: u-boot@lists.denx.de Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-06-29 08:16:06 +00:00
F: arch/arm/include/asm/mach-imx/
MAINTAINERS: i.MX: Add board/freescale/*mx* path Pass the board/freescale/*mx*/ path as files maintained by Stefano Babic. While this is not ideal and does not cover all the i.MX board cases, it gives at least a better hint for the /scripts/get_maintainer.pl tool. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-27 00:27:49 +00:00
F: board/freescale/*mx*/
MAINTAINERS: Add a number of "common" directories A number of platforms have "common" directories that are in turn not listed by the board MAINTAINERS file. Add these directories in many cases. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-07-18 23:33:31 +00:00
F: board/freescale/common/
Move i.MX8 container image loading support to common/spl To facilitate testing loading i.MX8 container images, move the parse-container code to common/spl. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2023-10-14 20:47:45 +00:00
F: common/spl/spl_imx_container.c
MAINTAINERS: imx: Add an entry for the serial driver Currently, when running ./scripts/get_maintainer.pl on serial_mxc.c no i.MX maintainer is returned. Fix it by adding an entry for this driver. Reported-by: Pali Rohár <pali@kernel.org> Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Peng Fan <peng.fan@nxp.com>
2022-09-05 10:57:00 +00:00
F: drivers/serial/serial_mxc.c
arm: imx: Check header before calling spl_load_imx_container Make sure we have an IMX header before calling spl_load_imx_container, since if we don't it will fail with -ENOENT. This allows us to fall back to legacy/raw images if they are also enabled. This is a functional change, one which likely should have been in place from the start, but a functional change nonetheless. Previously, all non-IMX8 images (except FITs without FIT_FULL) would be optimized out if the only image load method enabled supported IMX8 images. With this change, support for other image types now has an effect. There are seven boards with SPL_LOAD_IMX_CONTAINER enabled: three with SPL_BOOTROM_SUPPORT: imx93_11x11_evk_ld imx93_11x11_evk imx8ulp_evk and four with SPL_MMC: deneb imx8qxp_mek giedi imx8qm_mek All of these boards also have SPL_RAW_IMAGE_SUPPORT and SPL_LEGACY_IMAGE_FORMAT enabled as well. However, none have FIT support enabled. Of the six load methods affected by this patch, only SPL_MMC and SPL_BOOTROM_SUPPORT are enabled with SPL_LOAD_IMX_CONTAINER. spl_romapi_load_image_seekable does not support legacy or raw images, so there is no growth. However, mmc_load_image_raw_sector does support loading legacy/raw images. Since these images could not have been booted before, I have disabled support for legacy/raw images on these four boards. This reduces bloat from around 800 bytes to around 200. There are no in-tree boards with SPL_LOAD_IMX_CONTAINER and AHAB_BOOT both enabled, so we do not need to worry about potentially falling back to legacy images in a secure boot scenario. Future work could include merging imx_container.h with imx8image.h, since they appear to define mostly the same structures. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2023-10-14 20:47:44 +00:00
F: include/imx_container.h
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
MAINTAINERS: Add myself as maintainer for hikey This patch adds myself as maintainer for the hikey U-Boot port. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-20 16:13:58 +00:00
ARM HISILICON
M: Peter Griffin <peter.griffin@linaro.org>
MAINTAINERS: Add entry for HI3660 SoC Add MAINTAINERS entry for HI3660 SoC by adding the arch includes. While doing so, adding myself as the co-maintainer for HISILICON SoCs since I'm planning to maintain HI3660 SoC separately and considering doing improvements to the existing HiSilicon SoC architecture. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-02 15:10:11 +00:00
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
MAINTAINERS: Add myself as maintainer for hikey This patch adds myself as maintainer for the hikey U-Boot port. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-20 16:13:58 +00:00
S: Maintained
F: arch/arm/cpu/armv8/hisilicon
MAINTAINERS: ARM HISILICON: correct maintained path Fix an incorrect path. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-12 22:02:17 +00:00
F: arch/arm/include/asm/arch-hi6220/
MAINTAINERS: Add entry for HI3660 SoC Add MAINTAINERS entry for HI3660 SoC by adding the arch includes. While doing so, adding myself as the co-maintainer for HISILICON SoCs since I'm planning to maintain HI3660 SoC separately and considering doing improvements to the existing HiSilicon SoC architecture. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-02 15:10:11 +00:00
F: arch/arm/include/asm/arch-hi3660/
arm: add support for Hisilicon HiSTB family SoCs First supported chip is hi3798mv200 (which is similar to Hi3798cv200 used by poplar). Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
2023-04-01 11:17:33 +00:00
F: arch/arm/mach-histb
MAINTAINERS: Add myself as maintainer for hikey This patch adds myself as maintainer for the hikey U-Boot port. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-20 16:13:58 +00:00
MAINTAINERS: Introduce HPE GXP Architecture Create a section in MAINTAINERS for the GXP HPE architecture Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
2022-06-08 21:21:42 +00:00
ARM HPE GXP ARCHITECTURE
M: Jean-Marie Verdun <verdun@hpe.com>
M: Nick Hawkins <nick.hawkins@hpe.com>
S: Maintained
F: arch/arm/dts/hpe-bmc*
F: arch/arm/dts/hpe-gxp*
F: arch/arm/mach-hpe/
F: board/hpe/
F: configs/gxp_defconfig
F: doc/device-tree-bindings/spi/hpe,gxp-spi.yaml
F: drivers/timer/gxp-timer.c
F: drivers/spi/gxp_spi.c
arm: Add support for Qualcomm IPQ40xx family This introduces initial support for the popular Qualcomm IPQ40x8 and IPQ40x9 WiSoC series. IPQ40xx series have 4x Cortex A7 ARM-v7A cores. Supported are: IPQ4018, IPQ4019, IPQ4028 and IPQ4029. IPQ40x8 and IPQ40x9 use the same cores, but differ in addressable RAM size (1GB for IPQ40x9 and 256MB for IPQ40x8) and supported peripherals (IPQ40x8 lacks RGMII, LCD controller and EMMC/SDHCI controllers). IQP4028/IPQ4029 models differ from IPQ4018/IPQ4019 only by their rated temperatures rates with IPQ402X models being rated for wider temperature ranges. Initially this supports: * Simple clock driver (Only for UART1 now, will be extended) * Pinctrl driver (Supports UARTX and GPIO now, will be extended) * GPIOs already supported by msm_gpio driver with updates * UARTs already supported by serial_msm driver with updates Further peripherals will come in later patches. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2020-07-06 08:37:54 +00:00
ARM IPQ40XX
M: Robert Marko <robert.marko@sartura.hr>
M: Luka Kovacic <luka.kovacic@sartura.hr>
M: Luka Perkov <luka.perkov@sartura.hr>
S: Maintained
F: arch/arm/mach-ipq40xx/
dt-bindings: clock: import Qualcomm IPQ4019 bindings Import Qualcomm IPQ4019 GCC bindings from Linux. This will enable using bindings instead of raw clock numbers both in the driver and DTS like Linux does. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-01 17:22:54 +00:00
F: include/dt-bindings/clock/qcom,ipq4019-gcc.h
reset: Add IPQ40xx reset controller driver On Qualcomm IPQ40xx SoC series, GCC clock IP also handles the resets. So since this will be needed by further drivers, lets add a driver for the reset controller. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-10 14:00:02 +00:00
F: include/dt-bindings/reset/qcom,ipq4019-reset.h
F: drivers/reset/reset-ipq4019.c
phy: add driver for Qualcomm IPQ40xx USB PHY Add a driver to setup the USB PHY-s on Qualcomm IPQ40xx series SoCs. The driver sets up HS and SS phys. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-10 14:00:04 +00:00
F: drivers/phy/phy-qcom-ipq4019-usb.c
spi: Add Qualcomm QUP SPI controller driver This patch adds support for the Qualcomm QUP SPI controller that is commonly found in most of Qualcomm SoC-s. Driver currently supports v1.1.1, v2.1.1 and v2.2.1 HW. FIFO and Block modes are supported, no support for DMA mode is planned. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-08 20:05:09 +00:00
F: drivers/spi/spi-qup.c
net: Add IPQ40xx MDIO driver This adds the driver for the IPQ40xx built-in MDIO. This will be needed to support future PHY driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-08 20:05:11 +00:00
F: drivers/net/mdio-ipq4019.c
rng: Add Qualcomm MSM PRNG driver Add support for the hardware pseudo random number generator found in Qualcomm SoC-s. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-08 20:05:13 +00:00
F: drivers/rng/msm_rng.c
arm: Add support for Qualcomm IPQ40xx family This introduces initial support for the popular Qualcomm IPQ40x8 and IPQ40x9 WiSoC series. IPQ40xx series have 4x Cortex A7 ARM-v7A cores. Supported are: IPQ4018, IPQ4019, IPQ4028 and IPQ4029. IPQ40x8 and IPQ40x9 use the same cores, but differ in addressable RAM size (1GB for IPQ40x9 and 256MB for IPQ40x8) and supported peripherals (IPQ40x8 lacks RGMII, LCD controller and EMMC/SDHCI controllers). IQP4028/IPQ4029 models differ from IPQ4018/IPQ4019 only by their rated temperatures rates with IPQ402X models being rated for wider temperature ranges. Initially this supports: * Simple clock driver (Only for UART1 now, will be extended) * Pinctrl driver (Supports UARTX and GPIO now, will be extended) * GPIOs already supported by msm_gpio driver with updates * UARTs already supported by serial_msm driver with updates Further peripherals will come in later patches. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2020-07-06 08:37:54 +00:00
arm: layerscape: Add sfp driver This adds a driver for the Security Fuse Processor (SFP) present on LS1012A, LS1021A, LS1043A, and LS1046A processors. It holds the Super-Root Key (SRK), One-Time-Programmable Master Key (OTPMK), and other "security" related fuses. Similar devices (sharing the same name) are present on other processors, but for the moment this just supports the LS2 variants. The mirror registers are loaded during power-on reset. All mirror registers must be programmed or read at once. Because of this, `fuse prog` will program all fuses, even though only one might be specified. To prevent accidentally burning through all your fuse programming cycles with something like `fuse prog 0 0 A B C D`, we limit ourselves to one programming cycle per reset. Fuses are numbered based on their address. The fuse at 0x1e80200 is 0, the fuse at 0x1e80204 is 1, etc. The TA_PROG_SFP supply must be enabled when programming fuses, but must be disabled when reading them. Typically this supply is enabled by inserting a jumper or by setting a register in the board's FPGA. I've also added support for using a regulator. This could be helpful for automatically issuing the FPGA write, or for toggling a GPIO controlling the supply. I suggest using the following procedure for programming: 1. Override the fuses you wish to program => fuse override 0 2 A B C D 2. Inspect the values and ensure that they are what you expect => fuse sense 0 2 4 3. Enable TA_PROG_SFP 4. Issue a program command using OSPR0 as a dummy. Since it contains the write-protect bit you will usually want to write it last anyway. => fuse prog 0 0 0 5. Disable TA_PROG_SFP 6. Read back the fuses and ensure they are correct => fuse read 0 2 4 Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-22 18:34:18 +00:00
ARM LAYERSCAPE SFP
M: Sean Anderson <sean.anderson@seco.com>
S: Maintained
F: drivers/misc/ls2_sfp.c
MAINTAINERS: Update u-boot-marvell entry This patch does the following changes to the u-boot-marvell maintainers entry: - Add Armada-7k/8k to the list - Remove Prafulla and Luka since they have been silent on the list for a long time. Please speak up, if you would like to continue or better start maintaining. - Add multiple Marvell / MVEBU related driver directories and files Signed-off-by: Stefan Roese <sr@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Tom Rini <trini@konsulko.com> Acked-by: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Stefan Roese <sr@denx.de>
2019-02-15 12:56:56 +00:00
ARM MARVELL KIRKWOOD ARMADA-XP ARMADA-38X ARMADA-37XX ARMADA-7K/8K
MAINTAINERS: Update Marvell custodianship Add myself as custodian for the Marvell git repository. Additionally, add the mach-mvebu directory to the list of files / directories. And add Armada XP & Armada 38x to the title (not only kirkwood). Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Tom Rini <trini@konsulko.com> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14 04:00:00 +00:00
M: Stefan Roese <sr@denx.de>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-marvell.git
ARM: kirkwood: move SOC sources to mach-kirkwood Move arch/arm/cpu/arm926ejs/kirkwood/* -> arch/arm/mach-kirkwood/* Note: Perhaps, can we merge arch/arm/mach-kirkwood and arch/arm/mvebu-common into arch/arm/mach-mvebu, like Linux? Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Stefan Roese <sr@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-02-20 08:04:06 +00:00
F: arch/arm/mach-kirkwood/
MAINTAINERS: Update Marvell custodianship Add myself as custodian for the Marvell git repository. Additionally, add the mach-mvebu directory to the list of files / directories. And add Armada XP & Armada 38x to the title (not only kirkwood). Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Tom Rini <trini@konsulko.com> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14 04:00:00 +00:00
F: arch/arm/mach-mvebu/
ata: mvebu: move mvebu sata driver to drivers/ata directory Currently mvebu sata driver is in arch/arm/mach_mvebu directory, this patch moves it to drivers/ata directory with renaming "sata.c" to "ahci_mvebu.c" which is aligned to Linux. New ahci driver's kconfig option is added as AHCI_MVEBU which selects SCSI_AHCI and is based on AHCI. Signed-off-by: Ken Ma <make@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-25 07:49:24 +00:00
F: drivers/ata/ahci_mvebu.c
MAINTAINERS: Update list of Armada 385 and Armada 3720 drivers Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-03 16:57:49 +00:00
F: drivers/clk/mvebu/
MAINTAINERS: Update u-boot-marvell entry This patch does the following changes to the u-boot-marvell maintainers entry: - Add Armada-7k/8k to the list - Remove Prafulla and Luka since they have been silent on the list for a long time. Please speak up, if you would like to continue or better start maintaining. - Add multiple Marvell / MVEBU related driver directories and files Signed-off-by: Stefan Roese <sr@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Tom Rini <trini@konsulko.com> Acked-by: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Stefan Roese <sr@denx.de>
2019-02-15 12:56:56 +00:00
F: drivers/ddr/marvell/
F: drivers/gpio/mvebu_gpio.c
MAINTAINERS: Update list of Armada 385 and Armada 3720 drivers Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-03 16:57:49 +00:00
F: drivers/i2c/mvtwsi.c
F: drivers/mmc/xenon_sdhci.c
F: drivers/phy/marvell/
F: drivers/pinctrl/mvebu/
F: drivers/rtc/armada38x.c
MAINTAINERS: Update u-boot-marvell entry This patch does the following changes to the u-boot-marvell maintainers entry: - Add Armada-7k/8k to the list - Remove Prafulla and Luka since they have been silent on the list for a long time. Please speak up, if you would like to continue or better start maintaining. - Add multiple Marvell / MVEBU related driver directories and files Signed-off-by: Stefan Roese <sr@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Tom Rini <trini@konsulko.com> Acked-by: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Stefan Roese <sr@denx.de>
2019-02-15 12:56:56 +00:00
F: drivers/spi/kirkwood_spi.c
MAINTAINERS: Update list of Armada 385 and Armada 3720 drivers Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-03 16:57:49 +00:00
F: drivers/spi/mvebu_a3700_spi.c
MAINTAINERS: Update u-boot-marvell entry This patch does the following changes to the u-boot-marvell maintainers entry: - Add Armada-7k/8k to the list - Remove Prafulla and Luka since they have been silent on the list for a long time. Please speak up, if you would like to continue or better start maintaining. - Add multiple Marvell / MVEBU related driver directories and files Signed-off-by: Stefan Roese <sr@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Tom Rini <trini@konsulko.com> Acked-by: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Stefan Roese <sr@denx.de>
2019-02-15 12:56:56 +00:00
F: drivers/pci/pcie_dw_mvebu.c
PCI: zynqmp: Add ZynqMP NWL PCIe root port driver This patch adds the PCIe controller driver for the Xilinx / AMD ZynqMP NWL PCIe Bridge as root port. The driver source is partly copied from the Linux PCI driver and modified to enable usage in U-Boot (e.g. simplified and interrupt support removed). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Pali Rohár <pali@kernel.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20230525094918.111949-1-sr@denx.de Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-05-25 09:49:18 +00:00
F: drivers/pci/pcie-xilinx-nwl.c
MAINTAINERS: Update list of Armada 385 and Armada 3720 drivers Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-03 16:57:49 +00:00
F: drivers/watchdog/armada-37xx-wdt.c
MAINTAINERS: Update u-boot-marvell entry This patch does the following changes to the u-boot-marvell maintainers entry: - Add Armada-7k/8k to the list - Remove Prafulla and Luka since they have been silent on the list for a long time. Please speak up, if you would like to continue or better start maintaining. - Add multiple Marvell / MVEBU related driver directories and files Signed-off-by: Stefan Roese <sr@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Tom Rini <trini@konsulko.com> Acked-by: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Stefan Roese <sr@denx.de>
2019-02-15 12:56:56 +00:00
F: drivers/watchdog/orion_wdt.c
MAINTAINERS: Update list of Armada 385 and Armada 3720 drivers Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-03 16:57:49 +00:00
F: include/configs/mv-common.h
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
arm: mvebu: pci: Add me as co-maintainer and author of Marvell PCIe drivers There is no maintainer entry for pci-aardvark.c. Add entry for pci-aardvark.c and pci_mvebu.c with Pali and Stefan as maintainers. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-16 11:04:06 +00:00
ARM MARVELL PCIE CONTROLLER DRIVERS
M: Stefan Roese <sr@denx.de>
S: Maintained
T: git https://source.denx.de/u-boot/custodians/u-boot-marvell.git
F: drivers/pci/pci-aardvark.c
F: drivers/pci/pci_mvebu.c
arm: mvebu: serial: Add me as co-maintainer and author of Marvell serial drivers There is no maintainer entry for serial_mvebu_a3700.c. Add entry with Pali and Stefan as maintainers. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-16 11:04:07 +00:00
ARM MARVELL SERIAL DRIVERS
M: Pali Rohár <pali@kernel.org>
M: Stefan Roese <sr@denx.de>
S: Maintained
T: git https://source.denx.de/u-boot/custodians/u-boot-marvell.git
F: drivers/serial/serial_mvebu_a3700.c
MAINTAINERS: add an entry for MediaTek This patch adds an entry for MediaTek. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:08:06 +00:00
ARM MEDIATEK
M: Ryder Lee <ryder.lee@mediatek.com>
M: Weijie Gao <weijie.gao@mediatek.com>
MAINTAINERS: add USB driver to ARM MEDIATEK Add MediaTek USB3 Dual-Role controller driver to ARM MEDIATEK, and add myself as a maintainer for it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-14 07:08:33 +00:00
M: Chunfeng Yun <chunfeng.yun@mediatek.com>
MAINTAINERS: MediaTek: add MediaTek team in the entry Add MediaTek team as designated reviewer. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
2019-07-29 14:17:46 +00:00
R: GSS_MTK_Uboot_upstream <GSS_MTK_Uboot_upstream@mediatek.com>
MAINTAINERS: add an entry for MediaTek This patch adds an entry for MediaTek. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:08:06 +00:00
S: Maintained
F: arch/arm/mach-mediatek/
F: arch/arm/include/asm/arch-mediatek/
F: board/mediatek/
MAINTAINERS: MediaTek: add USB related files Add dt-binding files of xhci-mtk and phys, C files of phys. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 09:35:22 +00:00
F: doc/device-tree-bindings/phy/phy-mtk-*
F: doc/device-tree-bindings/usb/mediatek,*
MAINTAINERS: add an entry for MediaTek This patch adds an entry for MediaTek. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:08:06 +00:00
F: doc/README.mediatek
F: drivers/clk/mediatek/
MAINTAINERS: update maintainer for MediaTek ARM platform Add new files for MediaTek ARM platform Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-09-09 12:00:27 +00:00
F: drivers/cpu/mtk_cpu.c
F: drivers/i2c/mtk_i2c.c
MAINTAINERS: add an entry for MediaTek This patch adds an entry for MediaTek. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:08:06 +00:00
F: drivers/mmc/mtk-sd.c
MAINTAINERS: MediaTek: add USB related files Add dt-binding files of xhci-mtk and phys, C files of phys. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 09:35:22 +00:00
F: drivers/phy/phy-mtk-*
MAINTAINERS: add an entry for MediaTek This patch adds an entry for MediaTek. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:08:06 +00:00
F: drivers/pinctrl/mediatek/
F: drivers/power/domain/mtk-power-domain.c
F: drivers/ram/mediatek/
spi: add spi-mem driver for MediaTek MT7629 SoC This patch adds spi-mem driver for MediaTek MT7629 SoC to access SPI-NOR and SPI-NAND flashes. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> [jagan: squash MAINTAINERS file] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-22 11:39:01 +00:00
F: drivers/spi/mtk_snfi_spi.c
MAINTAINERS: update maintainer for MediaTek ARM platform Add new files for MediaTek ARM platform Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-09-09 12:00:27 +00:00
F: drivers/spi/mtk_spim.c
MAINTAINERS: add an entry for MediaTek This patch adds an entry for MediaTek. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:08:06 +00:00
F: drivers/timer/mtk_timer.c
MAINTAINERS: add USB driver to ARM MEDIATEK Add MediaTek USB3 Dual-Role controller driver to ARM MEDIATEK, and add myself as a maintainer for it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-14 07:08:33 +00:00
F: drivers/usb/host/xhci-mtk.c
F: drivers/usb/mtu3/
MAINTAINERS: add an entry for MediaTek This patch adds an entry for MediaTek. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:08:06 +00:00
F: drivers/watchdog/mtk_wdt.c
MAINTAINERS: ARM MEDIATEK: update file entries This patch adds new file entries for MediaTek SoCs Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2018-12-20 08:12:58 +00:00
F: drivers/net/mtk_eth.c
MAINTAINERS: update maintainer for MediaTek ARM platform Add new files for MediaTek ARM platform Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-09-09 12:00:27 +00:00
F: drivers/net/mtk_eth.h
MAINTAINERS: ARM MEDIATEK: update file entries This patch adds new file entries for MediaTek SoCs Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2018-12-20 08:12:58 +00:00
F: drivers/reset/reset-mediatek.c
MAINTAINERS: add an entry for MediaTek This patch adds an entry for MediaTek. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:08:06 +00:00
F: tools/mtk_image.c
F: tools/mtk_image.h
MAINTAINERS: update maintainer for MediaTek ARM platform Add new files for MediaTek ARM platform Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-09-09 12:00:27 +00:00
F: tools/mtk_nand_headers.c
F: tools/mtk_nand_headers.h
MAINTAINERS: add an entry for MediaTek This patch adds an entry for MediaTek. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:08:06 +00:00
N: mediatek
MAINTAINERS: add myself as Methode maintainer I am currently maintaing the Methode uDPU and eDPU boards so add myself as the maintainer for them. Remove the old entry from board/Marvell/mvebu_armada-37xx/MAINTAINERS. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-20 11:46:33 +00:00
ARM METHODE SUPPORT
M: Robert Marko <robert.marko@sartura.hr>
S: Maintained
F: arch/arm/dts/armada-3720-eDPU*
F: arch/arm/dts/armada-3720-uDPU*
F: configs/eDPU_defconfig
F: configs/uDPU_defconfig
MAINTAINERS: update u-boot-atmel tree Update Atmel AT91 maintainership Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2019-02-05 10:20:39 +00:00
ARM MICROCHIP/ATMEL AT91
M: Eugen Hristev <eugen.hristev@microchip.com>
S: Maintained
MAINTAINERS: correct at91 tree link This was not done when the tree name was changed, fix it now. Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
2023-07-07 13:45:32 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-at91.git
MAINTAINERS: add DT/bindings files to at91 entry With this change the DT and binding files are under the at91 tree maintainer, and get_maintainer.pl correctly reports the entry. Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
2023-08-07 07:22:03 +00:00
F: arch/arm/dts/at91*
F: arch/arm/dts/sam*
MAINTAINERS: update u-boot-atmel tree Update Atmel AT91 maintainership Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2019-02-05 10:20:39 +00:00
F: arch/arm/mach-at91/
F: board/atmel/
cpu: at91: add driver for CPU Add basic CPU driver use to retrieve information about CPU itself. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2020-10-01 10:27:25 +00:00
F: drivers/cpu/at91_cpu.c
memory: atmel-ebi: add Atmel EBI (External Bus Interface) driver The EBI is used to access peripherals like NAND, SRAM, NOR etc. Add this driver to probe the nand flash controller. This is a dummy driver and not yet a complete device driver for EBI. Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-10-25 10:51:04 +00:00
F: drivers/memory/atmel-ebi.c
MAINTAINERS: add MICROCHIP_FLEXCOM to at91 Add microchip flexcom driver to at91. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-09 09:23:46 +00:00
F: drivers/misc/microchip_flexcom.c
timer: atmel_tcb_timer: add atmel_tcb driver Add a driver for the timer counter block that can be found on sama5d2. This driver will be used when booting under OP-TEE since the pit timer which is part of the SYSC is secured. Channel 1 & 2 are configured to be chained together which allows to have a 64bits counter. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
2022-03-31 08:55:06 +00:00
F: drivers/timer/atmel_tcb_timer.c
MAINTAINERS: add DT/bindings files to at91 entry With this change the DT and binding files are under the at91 tree maintainer, and get_maintainer.pl correctly reports the entry. Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
2023-08-07 07:22:03 +00:00
F: include/dt-bindings/clk/at91.h
F: include/dt-bindings/clock/at91.h
F: include/dt-bindings/dma/at91.h
F: include/dt-bindings/mfd/at91-usart.h
include: dt-bindings: mfd: add atmel flexcom include file Add dt-bindings include file for Atmel Flexcom hardware block. This file is copied from Linux kernel. It is used in devicetrees from Linux. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-08-27 10:44:11 +00:00
F: include/dt-bindings/mfd/atmel-flexcom.h
MAINTAINERS: add DT/bindings files to at91 entry With this change the DT and binding files are under the at91 tree maintainer, and get_maintainer.pl correctly reports the entry. Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
2023-08-07 07:22:03 +00:00
F: include/dt-bindings/pinctrl/at91.h
F: include/dt-bindings/sound/microchip,pdmc.h
MAINTAINERS: add Microchip PIT64B timer Add Microchip PIT64B timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2020-09-23 10:17:21 +00:00
F: drivers/timer/mchp-pit64b-timer.c
MAINTAINERS: update u-boot-atmel tree Update Atmel AT91 maintainership Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2019-02-05 10:20:39 +00:00
arm: imx8mp: Initial MSC SM2S iMX8MP support Add support for the MSC SM2S-IMX8PLUS SMARC Module. Tested in conjunction with the MSC SM2-MB-EP1 Mini-ITX Carrier Board. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-10-25 09:55:02 +00:00
ARM MSC SM2S IMX8MP SOM
M: Martyn Welch <martyn.welch@collabora.com>
M: Ian Ray <ian.ray@ge.com>
S: Maintained
F: arch/arm/dts/imx8mp-msc-sm2s*
F: board/msc/sm2s_imx8mp/
F: configs/msc_sm2s_imx8mp_defconfig
F: include/configs/msc_sm2s_imx8mp.h
arm: add (default) config for nanopi2 board Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - Configuration changed, mainly several "CONFIG_..." moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig and USB related configs removed because USB is not supported yet. - s5p4418_nanopi2.h: "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable. - pinctrl is supported now, therefore "CONFIG_PINCTRL=y" added to s5p4418_nanopi2_defconfig. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-10 17:07:38 +00:00
ARM NEXELL S5P4418
M: Stefan Bosch <stefan_b@posteo.net>
S: Maintained
F: arch/arm/cpu/armv7/s5p4418/
F: arch/arm/dts/s5p4418*
F: arch/arm/mach-nexell/
F: board/friendlyarm/
F: configs/s5p4418_nanopi2_defconfig
F: doc/README.s5p4418
F: drivers/gpio/nx_gpio.c
F: drivers/i2c/nx_i2c.c
F: drivers/mmc/nexell_dw_mmc_dm.c
F: drivers/pinctrl/nexell/
arm: s5p4418: dm_serial: add driver source code Add dm_serial driver source code for S5P4418 SOC. Extend the "arm,pl011" driver by init of UART-clock and UART-reset. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2022-12-18 12:20:49 +00:00
F: drivers/serial/serial_s5p4418_pl011.c
arm: add (default) config for nanopi2 board Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - Configuration changed, mainly several "CONFIG_..." moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig and USB related configs removed because USB is not supported yet. - s5p4418_nanopi2.h: "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable. - pinctrl is supported now, therefore "CONFIG_PINCTRL=y" added to s5p4418_nanopi2_defconfig. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-10 17:07:38 +00:00
F: drivers/video/nexell/
F: drivers/video/nexell_display.c
F: include/configs/s5p4418_nanopi2.h
MAINTAINERS: Add entries for Actions Semi OWL family Add myself as the Maintainer for Actions Semi OWL family and its relevant board, drivers. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-06-14 18:08:39 +00:00
ARM OWL
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
S: Maintained
F: arch/arm/include/asm/arch-owl/
F: arch/arm/mach-owl/
cubieboard7: Remove ARCH= references from documentation When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. While in here, add the doc file to the MAINTAINERS entry. Cc: Amit Singh Tomar <amittomer25@gmail.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-05-26 18:36:55 +00:00
F: doc/board/actions/
MAINTAINERS: Add entries for Actions Semi OWL family Add myself as the Maintainer for Actions Semi OWL family and its relevant board, drivers. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-06-14 18:08:39 +00:00
F: drivers/clk/owl/
F: drivers/serial/serial_owl.c
arm: actions: Add common framework for Actions Owl Semi SoCs This commit adds common arch support for Actions Semi Owl series SoCs and removes the Bubblegum96 board files. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-19 13:58:25 +00:00
F: include/configs/owl-common.h
F: configs/bubblegum_96_defconfig
MAINTAINERS: add entry for cubieboard7 config This commit adds entry for cubieboard7 config under Actions Semi OWL family. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-19 13:58:37 +00:00
F: configs/cubieboard7_defconfig
MAINTAINERS: Add entries for Actions Semi OWL family Add myself as the Maintainer for Actions Semi OWL family and its relevant board, drivers. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-06-14 18:08:39 +00:00
MAINTAINERS: Add maintainer entry of RMOBILE Add MAINTAINERS entry. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-10-09 21:09:03 +00:00
ARM RENESAS RMOBILE/R-CAR
M: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
ARM: renesas: Update MAINTAINERS file Update MAINTAINERS file. Add missing MAINTAINERS file for Spider, Whitehawk and V3HSK boards. Update mail addresses. Add file globs to match on DT and driver files related to these boards. The GRPEACH and R2DPLUS are special in that they are not R-Car and have their own set of specialized drivers. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-08-06 18:57:34 +00:00
M: Marek Vasut <marek.vasut+renesas@mailbox.org>
MAINTAINERS: Add maintainer entry of RMOBILE Add MAINTAINERS entry. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-10-09 21:09:03 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-sh.git
MAINTAINERS: Add maintainer entry of RMOBILE Add MAINTAINERS entry. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-10-09 21:09:03 +00:00
F: arch/arm/mach-rmobile/
ARM: renesas: Update MAINTAINERS file Update MAINTAINERS file. Add missing MAINTAINERS file for Spider, Whitehawk and V3HSK boards. Update mail addresses. Add file globs to match on DT and driver files related to these boards. The GRPEACH and R2DPLUS are special in that they are not R-Car and have their own set of specialized drivers. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-08-06 18:57:34 +00:00
F: drivers/clk/renesas/
F: drivers/gpio/gpio-rcar.c
F: drivers/i2c/rcar_*
F: drivers/i2c/sh_i2c.c
F: drivers/mmc/renesas-sdhi.c
F: drivers/mmc/sh_mmcif*
F: drivers/mmc/tmio-common*
F: drivers/mtd/renesas_rpc_hf.c
F: drivers/net/ravb.c
F: drivers/net/rswitch.c
F: drivers/net/sh_eth*
F: drivers/pci/pci-rcar-*
F: drivers/phy/phy-rcar-*
F: drivers/phy/renesas/
F: drivers/pinctrl/renesas/
F: drivers/serial/serial_sh*
F: drivers/spi/renesas_rpc_spi.c
F: drivers/spi/sh_qspi.c
F: drivers/sysinfo/rcar3.c
F: drivers/usb/host/xhci-rcar*
MAINTAINERS: Add maintainer entry of RMOBILE Add MAINTAINERS entry. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-10-09 21:09:03 +00:00
MAINTAINERS: add entry for Rockchip Rockchip has its own git repository maintained by Simon. Document this. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-05 01:47:10 +00:00
ARM ROCKCHIP
M: Simon Glass <sjg@chromium.org>
MAINTAINERS: Update maintainer's mail address Philipp has change the mail and the legacy one is not available, update it to the new one. CC: Philipp Tomsich <philipp.tomsich@vrull.eu> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 10:02:07 +00:00
M: Philipp Tomsich <philipp.tomsich@vrull.eu>
rockchip: add Kever Yang as co-custodian This updates MAINTAINERS and git-mailrc to add me as a co-custodian for rockchip Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Tom Rini <trini@konsulko.com>
2019-04-03 07:28:16 +00:00
M: Kever Yang <kever.yang@rock-chips.com>
MAINTAINERS: add entry for Rockchip Rockchip has its own git repository maintained by Simon. Document this. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-05 01:47:10 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-rockchip.git
MAINTAINERS: Update rockchip platform maintain files Add px30, rv1126 soc, and rockchip soc based boards. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-07 07:52:47 +00:00
F: arch/arm/dts/px30*
MAINTAINERS: add rockchip regex for more files and directories The current files and directories with wildcard patterns for Rockchip patches in MAINTAINERS is not always complete. Add the regex for DT related files and a generic regex for catching some other forgotten cases, so that the maintainers receive all Rockchip related patches. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2021-12-24 17:10:28 +00:00
F: arch/arm/dts/rk3*
F: arch/arm/dts/rockchip*
MAINTAINERS: Update rockchip platform maintain files Add px30, rv1126 soc, and rockchip soc based boards. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-07 07:52:47 +00:00
F: arch/arm/dts/rv11*
MAINTAINERS: update maintained files for Rockchip With some of the recent cleanups (e.g. moving the DRAM controller drivers for Rockchip devices to drivers/ram/rockchip), the files and paths listed in MAINTAINERS no longer covered what really is looked after as part of the Rockchip port. This commit updates the files/paths listed in MAINTAINERS for the Rockchip port. I am certain, though, that this will have missed some additional paths that should have been included... Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-26 23:18:42 +00:00
F: arch/arm/include/asm/arch-rockchip/
MAINTAINERS: add entry for Rockchip Rockchip has its own git repository maintained by Simon. Document this. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-05 01:47:10 +00:00
F: arch/arm/mach-rockchip/
MAINTAINERS: Update rockchip platform maintain files Add px30, rv1126 soc, and rockchip soc based boards. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-07 07:52:47 +00:00
F: board/amarula/vyasa-rk3288/
F: board/anbernic/rgxx3_rk3566/
F: board/chipspark/popmetal_rk3288
F: board/engicam/px30_core/
F: board/firefly/
F: board/mqmaker/miqi_rk3288/
F: board/phytec/phycore_rk3288
F: board/pine64
F: board/radxa/
MAINTAINERS: rockchip: add board/rockchip as maintained entry Directory board/rockchip/ are all boards for Rockchip SoCs, so add it to maintained entry. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-23 07:01:14 +00:00
F: board/rockchip/
MAINTAINERS: Update rockchip platform maintain files Add px30, rv1126 soc, and rockchip soc based boards. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-07 07:52:47 +00:00
F: board/theobroma-systems
F: board/vamrs/rock960_rk3399/
MAINTAINERS: update maintained files for Rockchip With some of the recent cleanups (e.g. moving the DRAM controller drivers for Rockchip devices to drivers/ram/rockchip), the files and paths listed in MAINTAINERS no longer covered what really is looked after as part of the Rockchip port. This commit updates the files/paths listed in MAINTAINERS for the Rockchip port. I am certain, though, that this will have missed some additional paths that should have been included... Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-26 23:18:42 +00:00
F: drivers/clk/rockchip/
F: drivers/gpio/rk_gpio.c
F: drivers/misc/rockchip-efuse.c
rockchip: mmc: update MAINTAINERS The Rockchip-specific wrappers to the DW-MMC and the SDHCI driver were not covered as part of what's maintained by the architecture maintainers. Add them here. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-26 17:59:09 +00:00
F: drivers/mmc/rockchip_sdhci.c
F: drivers/mmc/rockchip_dw_mmc.c
MAINTAINERS: update maintained files for Rockchip With some of the recent cleanups (e.g. moving the DRAM controller drivers for Rockchip devices to drivers/ram/rockchip), the files and paths listed in MAINTAINERS no longer covered what really is looked after as part of the Rockchip port. This commit updates the files/paths listed in MAINTAINERS for the Rockchip port. I am certain, though, that this will have missed some additional paths that should have been included... Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-26 23:18:42 +00:00
F: drivers/pinctrl/rockchip/
F: drivers/ram/rockchip/
F: drivers/sysreset/sysreset_rockchip.c
rockchip: video: update MAINTAINERS The video drivers (VOP, HDMI encoder, LVDS encoder, MIPI encoder) for Rockchip SOCs are self-contained and are mainly impacted by other changes in the architecture support (e.g. pinctrl, clocking, etc). Let's add these to the list of files maintained as part of the Rockchip port. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-02-23 16:38:53 +00:00
F: drivers/video/rockchip/
MAINTAINERS: update maintained files for Rockchip With some of the recent cleanups (e.g. moving the DRAM controller drivers for Rockchip devices to drivers/ram/rockchip), the files and paths listed in MAINTAINERS no longer covered what really is looked after as part of the Rockchip port. This commit updates the files/paths listed in MAINTAINERS for the Rockchip port. I am certain, though, that this will have missed some additional paths that should have been included... Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-26 23:18:42 +00:00
F: tools/rkcommon.c
F: tools/rkcommon.h
F: tools/rkimage.c
F: tools/rksd.c
F: tools/rkspi.c
MAINTAINERS: add rockchip regex for more files and directories The current files and directories with wildcard patterns for Rockchip patches in MAINTAINERS is not always complete. Add the regex for DT related files and a generic regex for catching some other forgotten cases, so that the maintainers receive all Rockchip related patches. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2021-12-24 17:10:28 +00:00
N: rockchip
MAINTAINERS: add entry for Rockchip Rockchip has its own git repository maintained by Simon. Document this. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-05 01:47:10 +00:00
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
ARM SAMSUNG
M: Minkyu Kang <mk7.kang@samsung.com>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-samsung.git
arm: s5pc1xx: move SoC to mach-s5pc1xx move arm/arm/cpu/armv7/s5pc1xx to arch/arm/mach-s5pc1xx Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-20 06:24:57 +00:00
F: arch/arm/mach-exynos/
F: arch/arm/mach-s5pc1xx/
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/arm/cpu/armv7/s5p-common/
MAINTAINERS: Adopt SanCloud boards Signed-off-by: Paul Barker <paul.barker@sancloud.com> Cc: Marc Murphy <marc.murphy@sancloud.com>
2022-11-14 12:42:43 +00:00
ARM SANCLOUD
M: Paul Barker <paul.barker@sancloud.com>
R: Marc Murphy <marc.murphy@sancloud.com>
S: Supported
F: arch/arm/dts/am335x-sancloud*
Add myself as Snapdragon and SPMI maintainer - Update MAINTAINERS - Update git-mailrc Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-31 21:12:34 +00:00
ARM SNAPDRAGON
MAINTAINERS: update Qualcomm maintainer As Ramon has been inactive for some time now, add myself and Neil Armstrong to maintain Qualcomm efforts going forwards. Add Sumit Garg who maintains several Qualcomm platforms as reviewer. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-10-31 14:26:43 +00:00
M: Caleb Connolly <caleb.connolly@linaro.org>
M: Neil Armstrong <neil.armstrong@linaro.org>
R: Sumit Garg <sumit.garg@linaro.org>
Add myself as Snapdragon and SPMI maintainer - Update MAINTAINERS - Update git-mailrc Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-31 21:12:34 +00:00
S: Maintained
F: arch/arm/mach-snapdragon/
MAINTAINERS: Add more sources to Arch Snapdragon Add scattered driver files around the source tree that belongs to Snapdragon arch. Not sure why they were not included in the first place. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-08-03 17:56:27 +00:00
F: drivers/gpio/msm_gpio.c
F: drivers/mmc/msm_sdhci.c
phy: db410c: Add MSM USB PHY driver Add a PHY driver for the Qualcomm dragonboard 410c which allows switching on/off and resetting the phy connected to the EHCI controllers and USBHS controller. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-21 10:35:47 +00:00
F: drivers/phy/msm8916-usbh-phy.c
MAINTAINERS: Add more sources to Arch Snapdragon Add scattered driver files around the source tree that belongs to Snapdragon arch. Not sure why they were not included in the first place. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-08-03 17:56:27 +00:00
F: drivers/serial/serial_msm.c
serial: qcom: add support for GENI serial driver Generic Interface (GENI) Serial Engine (SE) based uart can be found on newer qualcomm SOCs, starting from SDM845. Tested on Samsung SM-G9600(starqltechn) by chain-loading u-boot with stock bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-17 10:44:27 +00:00
F: drivers/serial/serial_msm_geni.c
soc: qualcomm: Add Shared Memory Manager driver The Shared Memory Manager driver implements an interface for allocating and accessing items in the memory area shared among all of the processors in a Qualcomm platform. Adapted from the Linux driver (4.17) Changes from the original Linux driver: * Removed HW spinlock mechanism, which is irrelevant in U-boot particualar use case, which is just reading from the smem. * Adapted from Linux driver model to U-Boot's. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-01 23:57:56 +00:00
F: drivers/smem/msm_smem.c
spmi: msm: add arbiter version 5 support Currently driver supports only version 1 and 2. Version 5 has slightly different registers structure Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-17 10:44:28 +00:00
F: drivers/spmi/spmi-msm.c
MAINTAINERS: Add more sources to Arch Snapdragon Add scattered driver files around the source tree that belongs to Snapdragon arch. Not sure why they were not included in the first place. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-08-03 17:56:27 +00:00
F: drivers/usb/host/ehci-msm.c
Add myself as Snapdragon and SPMI maintainer - Update MAINTAINERS - Update git-mailrc Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-31 21:12:34 +00:00
MAINTAINERS: bring sections into alphabetic order NETWORK should be after NAND_FLASH. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-07 03:04:29 +00:00
ARM STI
MAINTAINERS: Update ARM STI and ARM STM STM32MP Arch maintainers emails Update Patrick and my email address with the one dedicated to upstream activities. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-12-02 17:47:29 +00:00
M: Patrice Chotard <patrice.chotard@foss.st.com>
MAINTAINERS: bring sections into alphabetic order NETWORK should be after NAND_FLASH. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-07 03:04:29 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-stm.git
MAINTAINERS: bring sections into alphabetic order NETWORK should be after NAND_FLASH. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-07 03:04:29 +00:00
F: arch/arm/mach-sti/
F: arch/arm/include/asm/arch-sti*/
MAINTAINERS: update entry for ARM STI Add STi drivers/include files and git tree. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-12 10:11:18 +00:00
F: drivers/phy/sti_usb_phy.c
F: drivers/pinctrl/pinctrl-sti.c
F: drivers/mmc/sti_sdhci.c
F: drivers/reset/sti-reset.c
F: drivers/serial/serial_sti_asc.c
F: drivers/sysreset/sysreset_sti.c
timer: sti: convert sti-timer to arm a9 global timer STI timer is actually ARM Cortex A9 global timer. Convert the driver to use generic global timer name and make it consistent with Linux kernel global timer driver. This also allows any A9 based device to use this driver. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-08-24 04:44:32 +00:00
F: drivers/timer/arm_global_timer.c
MAINTAINERS: update entry for ARM STI Add STi drivers/include files and git tree. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-12 10:11:18 +00:00
F: drivers/usb/host/dwc3-sti-glue.c
F: include/dwc3-sti-glue.h
F: include/dt-bindings/clock/stih407-clks.h
F: include/dt-bindings/clock/stih410-clks.h
F: include/dt-bindings/reset/stih407-resets.h
MAINTAINERS: bring sections into alphabetic order NETWORK should be after NAND_FLASH. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-07 03:04:29 +00:00
arm: stm32: add new architecture for STM32MP family - add new arch stm32mp for STM32 MPU/Soc based on Cortex A - support for stm32mp157 SOC - SPL is used as first boot stage loader - using driver model for all the drivers, even in SPL - all security feature are deactivated (ETZC and TZC) - reused STM32 MCU drivers when it is possible Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:10 +00:00
ARM STM STM32MP
MAINTAINERS: Update ARM STI and ARM STM STM32MP Arch maintainers emails Update Patrick and my email address with the one dedicated to upstream activities. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-12-02 17:47:29 +00:00
M: Patrick Delaunay <patrick.delaunay@foss.st.com>
M: Patrice Chotard <patrice.chotard@foss.st.com>
MAINTAINERS: Update stm32mp entry Add mailing list for stm32mp architecture and board. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-11-08 16:52:21 +00:00
L: uboot-stm32@st-md-mailman.stormreply.com (moderated for non-subscribers)
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-stm.git
arm: stm32: add new architecture for STM32MP family - add new arch stm32mp for STM32 MPU/Soc based on Cortex A - support for stm32mp157 SOC - SPL is used as first boot stage loader - using driver model for all the drivers, even in SPL - all security feature are deactivated (ETZC and TZC) - reused STM32 MCU drivers when it is possible Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:10 +00:00
S: Maintained
MAINTAINERS: update stm32mp1 path for arch Handle correctly directory arch/arm/mach-stm32mp/ : Add a trailing slash to include all files and subdirectory files. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-01-21 16:20:00 +00:00
F: arch/arm/mach-stm32mp/
doc: add board documentation for stm32mp1 Change plain test README to rst format and move this file in documentation directory. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-25 18:04:14 +00:00
F: doc/board/st/
MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD Add the missing driver and files for mach-stm32mp / stm32mp1 product. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-30 17:16:56 +00:00
F: drivers/adc/stm32-adc*
clk: Add directory for STM32 clock drivers Add a directory in drivers/clk to regroup the clock drivers for all STM32 Soc with CONFIG_ARCH_STM32 (MCUs with cortex M) or CONFIG_ARCH_STM32MP (MPUs with cortex A). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Grzegorz Szymaszek <gszymaszek@short.pl> Acked-by: Sean Anderson <seanga2@gmail.com> Change-Id: I955af307963f732167396f0157a30cf2fc91f150
2022-05-19 15:56:45 +00:00
F: drivers/clk/stm32/
MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD Add the missing driver and files for mach-stm32mp / stm32mp1 product. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-30 17:16:56 +00:00
F: drivers/gpio/stm32_gpio.c
F: drivers/hwspinlock/stm32_hwspinlock.c
MAINTAINERS: Update STM32MP fragments Add new drivers Add Christophe Kerello and myself as maintainers Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-06 09:52:23 +00:00
F: drivers/i2c/stm32f7_i2c.c
MAINTAINERS: Add stm32 mailbox IPPC driver Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-14 09:20:35 +00:00
F: drivers/mailbox/stm32-ipcc.c
stm32mp1: add FUSE command support Add support of fuse command (read/write/program/sense) on bank 0 to access to BSEC SAFMEM (4096 OTP bits). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-17 13:24:06 +00:00
F: drivers/misc/stm32mp_fuse.c
MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD Add the missing driver and files for mach-stm32mp / stm32mp1 product. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-30 17:16:56 +00:00
F: drivers/misc/stm32_rcc.c
MAINTAINERS: Update STM32MP fragments Add new drivers Add Christophe Kerello and myself as maintainers Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-06 09:52:23 +00:00
F: drivers/mmc/stm32_sdmmc2.c
MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD Add the missing driver and files for mach-stm32mp / stm32mp1 product. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-30 17:16:56 +00:00
F: drivers/mtd/nand/raw/stm32_fmc2_nand.c
MAINTAINERS: Update STM32MP fragments Add new drivers Add Christophe Kerello and myself as maintainers Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-06 09:52:23 +00:00
F: drivers/phy/phy-stm32-usbphyc.c
F: drivers/pinctrl/pinctrl_stm32.c
power: rename stpmu1 to official name stpmic1 Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-04 10:26:17 +00:00
F: drivers/power/pmic/stpmic1.c
MAINTAINERS: Update STM32MP fragments Add new drivers Add Christophe Kerello and myself as maintainers Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-06 09:52:23 +00:00
F: drivers/power/regulator/stm32-vrefbuf.c
power: rename stpmu1 to official name stpmic1 Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-04 10:26:17 +00:00
F: drivers/power/regulator/stpmic1.c
MAINTAINERS: ARM STM STM32MP: correct file paths Provide correct file paths. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-03 23:16:08 +00:00
F: drivers/ram/stm32mp1/
MAINTAINERS: Add stm32 remoteproc driver Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-05-31 13:11:35 +00:00
F: drivers/remoteproc/stm32_copro.c
MAINTAINERS: Update STM32MP fragments Add new drivers Add Christophe Kerello and myself as maintainers Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-06 09:52:23 +00:00
F: drivers/reset/stm32-reset.c
rng: add OP-TEE based Random Number Generator Add driver for OP-TEE based Random Number Generator on ARM SoCs where hardware entropy sources are not accessible to normal world and the RNG service is provided by a HWRNG Trusted Application (TA). This driver is based on the linux driver: char/hw_random/optee-rng.c Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-03-29 12:21:23 +00:00
F: drivers/rng/optee_rng.c
rng: stm32: rename STM32 RNG driver Rename the RNG driver as it is usable by other STM32 platforms than the STM32MP1x ones. Rename CONFIG_RNG_STM32MP1 to CONFIG_RNG_STM32 Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com> Reviewed-by: Grzegorz Szymaszek <gszymaszek@short.pl> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-09-19 15:27:53 +00:00
F: drivers/rng/stm32_rng.c
MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD Add the missing driver and files for mach-stm32mp / stm32mp1 product. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-30 17:16:56 +00:00
F: drivers/rtc/stm32_rtc.c
F: drivers/serial/serial_stm32.*
MAINTAINERS: Update STM32MP fragments Add new drivers Add Christophe Kerello and myself as maintainers Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-06 09:52:23 +00:00
F: drivers/spi/stm32_qspi.c
spi: stm32: Add Serial Peripheral Interface driver for STM32MP Add SPI driver support for STM32MP SoCs family. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-30 16:08:28 +00:00
F: drivers/spi/stm32_spi.c
MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD Add the missing driver and files for mach-stm32mp / stm32mp1 product. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-30 17:16:56 +00:00
F: drivers/video/stm32/stm32_ltdc.c
watchdog: stm32mp: Add watchdog driver This patch adds IWDG (Independent WatchDoG) support for STM32MP platform. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-04-30 15:26:22 +00:00
F: drivers/watchdog/stm32mp_wdt.c
MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD Add the missing driver and files for mach-stm32mp / stm32mp1 product. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-30 17:16:56 +00:00
F: include/dt-bindings/clock/stm32fx-clock.h
dt-bindings: stm32mp13: add clock & reset support for STM32MP13 Add support of stm32mp13 DT bindings of clock and reset. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-11-24 10:36:03 +00:00
F: include/dt-bindings/clock/stm32mp*
MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD Add the missing driver and files for mach-stm32mp / stm32mp1 product. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-30 17:16:56 +00:00
F: include/dt-bindings/pinctrl/stm32-pinfunc.h
dt-bindings: stm32mp13: add clock & reset support for STM32MP13 Add support of stm32mp13 DT bindings of clock and reset. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-11-24 10:36:03 +00:00
F: include/dt-bindings/reset/stm32mp*
MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD Add the missing driver and files for mach-stm32mp / stm32mp1 product. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-30 17:16:56 +00:00
F: include/stm32_rcc.h
board: stm32mp1: add splash screen with stmicroelectronics logo Display the STMicroelectronics logo with features VIDEO_LOGO and SPLASH_SCREEN on STMicroelectronics boards. With CONFIG_SYS_VENDOR = "st", the logo st.bmp is selected, loaded at the address indicated by splashimage and centered with "splashpos=m,m". Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-07-10 11:30:59 +00:00
F: tools/logos/st.bmp
MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD Add the missing driver and files for mach-stm32mp / stm32mp1 product. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-30 17:16:56 +00:00
F: tools/stm32image.c
MAINTAINERS: Add stm32 and stm regexp for ARM STM STM32MP platform Add files and directories regex "stm32" and "stm" in "ARM STM STM32MP" platform to avoid missing files or drivers supported by the STMicroelectronics series STM32MP15x. This patch adds the rules already used in Linux kernel for ARM/STM32 ARCHITECTURE. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-10-06 11:59:41 +00:00
N: stm
N: stm32
MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD Add the missing driver and files for mach-stm32mp / stm32mp1 product. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-30 17:16:56 +00:00
arm: stm32: add new architecture for STM32MP family - add new arch stm32mp for STM32 MPU/Soc based on Cortex A - support for stm32mp157 SOC - SPL is used as first boot stage loader - using driver model for all the drivers, even in SPL - all security feature are deactivated (ETZC and TZC) - reused STM32 MCU drivers when it is possible Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:10 +00:00
stv0991: Add basic stv0991 architecture support stv0991 architecture support added. It contains the support for following blocks - Timer - uart Signed-off-by: Vikas Manocha <vikas.manocha@st.com> [trini: Add arch/arm/cpu/armv7/Makefile hunk] Signed-off-by: Tom Rini <trini@ti.com>
2014-11-18 18:42:22 +00:00
ARM STM STV0991
M: Vikas Manocha <vikas.manocha@st.com>
S: Maintained
F: arch/arm/cpu/armv7/stv0991/
F: arch/arm/include/asm/arch-stv0991/
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
ARM SUNXI
MAINTAINERS: Change Jagan's email address Missed few mails from openedev, since most of the day I look at amarulasolutions mail so update the same. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-12 13:14:34 +00:00
M: Jagan Teki <jagan@amarulasolutions.com>
MAINTAINERS, git-mailrc: Update sunxi maintainers Maxime mentioned that he feels not having the time to be an Allwinner maintainer anymore. Take over from him. Maxime, many thanks for your great work in the past! I hope I can still relay the occasional technical question to you in the future. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-10-28 23:37:43 +00:00
M: Andre Przywara <andre.przywara@arm.com>
sunxi: Add boards/sunxi and arch/arm/mach-sunxi to sunxi MAINTAINERS entry Recently some sunxi related code was moved to arch/arm/mach-sunxi, but the MAINTAINERS entry was not updated to reflect this. Add this, and the board level boards/sunxi directory to our entry. While at it, also update its status, to reflect the current active maintainership. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-03-01 06:03:34 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-sunxi.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/arm/cpu/armv7/sunxi/
F: arch/arm/include/asm/arch-sunxi/
sunxi: Add boards/sunxi and arch/arm/mach-sunxi to sunxi MAINTAINERS entry Recently some sunxi related code was moved to arch/arm/mach-sunxi, but the MAINTAINERS entry was not updated to reflect this. Add this, and the board level boards/sunxi directory to our entry. While at it, also update its status, to reflect the current active maintainership. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-03-01 06:03:34 +00:00
F: arch/arm/mach-sunxi/
F: board/sunxi/
MAINTAINERS: Add allwinner/sunxi driver directories These drivers are sunxi platform-specific, and so are of interest to the sunxi maintainers. In fact, as there is no PHY driver maintainer, drivers/phy/allwinner had no maintainer at all. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-19 03:13:36 +00:00
F: drivers/clk/sunxi/
F: drivers/phy/allwinner/
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
F: drivers/pinctrl/sunxi/
MAINTAINERS: Add allwinner/sunxi driver directories These drivers are sunxi platform-specific, and so are of interest to the sunxi maintainers. In fact, as there is no PHY driver maintainer, drivers/phy/allwinner had no maintainer at all. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-19 03:13:36 +00:00
F: drivers/video/sunxi/
tools: mkimage: Add Allwinner TOC0 support Most Allwinner sunxi SoCs have separate boot ROMs in non-secure and secure mode. The "non-secure" or "normal" boot ROM (NBROM) uses the existing sunxi_egon image type. The secure boot ROM (SBROM) uses a completely different image type, known as TOC0. A TOC0 image is composed of a header and two or more items. One item is the firmware binary. The others form a chain linking the firmware signature to the root-of-trust public key (ROTPK), which has its hash burned in the SoC's eFuses. Signatures are made using RSA-2048 + SHA256. The pseudo-ASN.1 structure is manually assembled; this is done to work around bugs/quirks in the boot ROM, which vary between SoCs. This TOC0 implementation has been verified to work with the A50, A64, H5, H6, and H616 SBROMs, and it may work with other SoCs. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-03-18 05:00:43 +00:00
F: tools/sunxi*
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
ARM TEGRA
MAINTAINERS: Step up as co-maintainer of Tegra SOC platform Update maintainers for Tegra SoC platform. Include device trees and drivers which contain tegra in the name. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-10-31 18:46:50 +00:00
M: Thierry Reding <treding@nvidia.com>
M: Svyatoslav Ryhel <clamor95@gmail.com>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-tegra.git
MAINTAINERS: Step up as co-maintainer of Tegra SOC platform Update maintainers for Tegra SoC platform. Include device trees and drivers which contain tegra in the name. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-10-31 18:46:50 +00:00
F: arch/arm/dts/tegra*
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/arm/include/asm/arch-tegra*/
MAINTAINERS: Step up as co-maintainer of Tegra SOC platform Update maintainers for Tegra SoC platform. Include device trees and drivers which contain tegra in the name. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-10-31 18:46:50 +00:00
F: arch/arm/mach-tegra/
F: drivers/*/tegra*
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
ARM TI
MAINTAINERS: Update ARM TI entry Move TI maintainership to Tom. Updated with the following commands: find ./ -name MAINTAINERS | xargs sed -i s/"Lokesh Vutla <lokeshvutla@ti.com>"/"Tom Rini <trini@konsulko.com>"/g Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Acked-by: Tom Rini <trini@konsulko.com>
2021-09-03 07:15:37 +00:00
M: Tom Rini <trini@konsulko.com>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-ti.git
dts: am57xx*: Add ipu early boot DT changes Add support for ipu early boot. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-01-27 12:17:00 +00:00
F: arch/arm/dts/am57xx*
dts: dra7-ipu-common-early-boot.dtsi: Add all the ipu early boot related nodes Add all the ipu early boot related nodes Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-01-27 12:16:57 +00:00
F: arch/arm/dts/dra7*
MAINTAINERS: fix TI DaVinci directory path and add KeyStone Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-04-08 09:23:23 +00:00
F: arch/arm/mach-davinci/
arm: K3: Add initial support for TI's K3 generation of SoCs Add support for Texas Instruments' K3 Generation Processor families. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-08-27 10:27:08 +00:00
F: arch/arm/mach-k3/
MAINTAINERS: fix TI DaVinci directory path and add KeyStone Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-04-08 09:23:23 +00:00
F: arch/arm/mach-keystone/
MAINTAINERS: update entry for ARM TI Add all TI specific drivers, include, arch files under ARM TI entry. Driver files are added only if there is no entry for the specific subsystem in MAINTAINERS file. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-16 14:30:54 +00:00
F: arch/arm/mach-omap2/
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/arm/include/asm/arch-omap*/
F: arch/arm/include/asm/ti-common/
MAINTAINERS: update entry for ARM TI Add all TI specific drivers, include, arch files under ARM TI entry. Driver files are added only if there is no entry for the specific subsystem in MAINTAINERS file. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-16 14:30:54 +00:00
F: board/ti/
F: drivers/dma/ti*
F: drivers/firmware/ti_sci.*
F: drivers/gpio/omap_gpio.c
F: drivers/memory/ti-aemif.c
F: drivers/misc/k3_avs.c
F: drivers/mailbox/k3-sec-procy.c
F: drivers/pci/pcie_dw_ti.c
F: drivers/phy/keystone-usb-phy.c
F: drivers/phy/omap-usb2-phy.c
F: drivers/phy/phy-ti-am654.c
F: drivers/phy/ti-pipe3-phy.c
F: drivers/ram/k3*
remoteproc: ipu: Add driver to bring up ipu The driver enables IPU support. Basically enables the clocks, timers, watchdog timers and bare minimal MMU and supports loading the firmware from mmc. Signed-off-by: Keerthy <j-keerthy@ti.com> [Amjad: fix compile warnings] Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-01-27 12:16:56 +00:00
F: drivers/remoteproc/ipu_rproc.c
MAINTAINERS: update entry for ARM TI Add all TI specific drivers, include, arch files under ARM TI entry. Driver files are added only if there is no entry for the specific subsystem in MAINTAINERS file. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-16 14:30:54 +00:00
F: drivers/remoteproc/k3_system_controller.c
remoteproc: pru: Add support for various PRU cores on K3 AM65x SoCs The K3 AM65x family of SoCs have the next generation of the PRU-ICSS processor subsystem, commonly referred to as ICSSG. Each ICSSG processor subsystem on AM65x SR1.0 contains two primary PRU cores and two new auxiliary PRU cores called RTUs. The AM65x SR2.0 SoCs have a revised ICSSG IP that is based off the subsequent IP revision used on J721E SoCs. This IP instance has two new custom auxiliary PRU cores called Transmit PRUs (Tx_PRUs) in addition to the existing PRUs and RTUs. Each RTU and Tx_PRU cores have their own dedicated IRAM (smaller than a PRU), Control and debug feature sets, but is different in terms of sub-modules integrated around it and does not have the full capabilities associated with a PRU core. The RTU core is typically used to aid a PRU core in accelerating data transfers, while the Tx_PRU cores is normally used to control the TX L2 FIFO if enabled in Ethernet applications. Both can also be used to run independent applications. The RTU and Tx_PRU cores though share the same Data RAMs as the PRU cores, so the memories have to be partitioned carefully between different applications. The new cores also support a new sub-module called Task Manager to support two different context thread executions. The driver currently supports the AM65xx SoC Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210622063431.3151-3-lokeshvutla@ti.com
2021-06-22 06:34:28 +00:00
F: drivers/remoteproc/pruc_rpoc.c
MAINTAINERS: update entry for ARM TI Add all TI specific drivers, include, arch files under ARM TI entry. Driver files are added only if there is no entry for the specific subsystem in MAINTAINERS file. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-16 14:30:54 +00:00
F: drivers/remoteproc/ti*
reset: dra7: Add a reset driver Add a reset driver to bring IPs out of reset. Signed-off-by: Keerthy <j-keerthy@ti.com> [Amjad: reset_ops structure member "free" has been renamed to "rfree", use the latter instead] Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-01-27 12:16:51 +00:00
F: drivers/reset/reset-dra7.c
MAINTAINERS: update entry for ARM TI Add all TI specific drivers, include, arch files under ARM TI entry. Driver files are added only if there is no entry for the specific subsystem in MAINTAINERS file. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-16 14:30:54 +00:00
F: drivers/reset/reset-ti-sci.c
F: drivers/rtc/davinci.c
F: drivers/serial/serial_omap.c
F: drivers/soc/ti/
F: drivers/sysreset/sysreset-ti-sci.c
F: drivers/thermal/ti-bandgap.c
F: drivers/timer/omap-timer.c
drivers: video: tidss: TIDSS video driver support for AM62x Added tidss video driver support which enables display on oldi panel using AM62x, it creates a simple pipeline framebuffer==>vidl1==>ovr1==>vp1==>oldi_panel and calculates clock rates for panel from panel node in device tree. To compile TIDSS when user sets CONFIG_VIDEO_TIDSS add rule in Makefile. Include tidss folder location in Kconfig. TIDSS is ported from linux kernel version 5.10.145 Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
2023-01-31 10:05:17 +00:00
F: drivers/video/tidss/
MAINTAINERS: update entry for ARM TI Add all TI specific drivers, include, arch files under ARM TI entry. Driver files are added only if there is no entry for the specific subsystem in MAINTAINERS file. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-16 14:30:54 +00:00
F: drivers/watchdog/omap_wdt.c
soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs The Programmable Real-Time Unit - Industrial Communication Subsystem (PRU-ICSS) is present of various TI SoCs such as AM335x or AM437x or the AM654x family. Each SoC can have one or more PRUSS instances that may or may not be identical. The PRUSS consists of dual 32-bit RISC cores called the Programmable Real-Time Units (PRUs), some shared, data and instruction memories, some internal peripheral modules, and an interrupt controller. The programmable nature of the PRUs provide flexibility to implement custom peripheral interfaces, fast real-time responses, or specialized data handling. Add support for pruss driver. Currently am654x family is supported. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210622063431.3151-2-lokeshvutla@ti.com
2021-06-22 06:34:27 +00:00
F: include/linux/pruss_driver.h
MAINTAINERS: update entry for ARM TI Add all TI specific drivers, include, arch files under ARM TI entry. Driver files are added only if there is no entry for the specific subsystem in MAINTAINERS file. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-16 14:30:54 +00:00
F: include/linux/soc/ti/
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
MAINTAINERS: Add ARM U8500 Add myself as maintainer for ST-Ericsson U8500 SoC to MAINTAINERS. Linus Walleij usually reviews all Ux500 related patches, so add him as a reviewer. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-04 17:45:18 +00:00
ARM U8500
M: Stephan Gerhold <stephan@gerhold.net>
R: Linus Walleij <linus.walleij@linaro.org>
S: Maintained
F: arch/arm/dts/ste-*
F: arch/arm/mach-u8500/
MAINTAINERS: Add new drivers for ARM U8500 Update MAINTAINERS with various drivers for ARM U8500 that were added during the U-Boot 2021.10 merge window. Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-08-07 13:07:18 +00:00
F: drivers/gpio/nmk_gpio.c
F: drivers/phy/phy-ab8500-usb.c
F: drivers/power/pmic/ab8500.c
MAINTAINERS: Add ARM U8500 Add myself as maintainer for ST-Ericsson U8500 SoC to MAINTAINERS. Linus Walleij usually reviews all Ux500 related patches, so add him as a reviewer. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-04 17:45:18 +00:00
F: drivers/timer/nomadik-mtu-timer.c
MAINTAINERS: Add new drivers for ARM U8500 Update MAINTAINERS with various drivers for ARM U8500 that were added during the U-Boot 2021.10 merge window. Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-08-07 13:07:18 +00:00
F: drivers/usb/musb-new/ux500.c
F: drivers/video/mcde_simple.c
MAINTAINERS: Add ARM U8500 Add myself as maintainer for ST-Ericsson U8500 SoC to MAINTAINERS. Linus Walleij usually reviews all Ux500 related patches, so add him as a reviewer. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-04 17:45:18 +00:00
MAINTAINERS: add me as a maintainer of UniPhier platform Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Michal Simek <monstr@monstr.eu>
2014-10-03 10:21:08 +00:00
ARM UNIPHIER
MAINTAINERS: Step up as maintainers of UniPhier SoC platform Update maintainers for UniPhier SoC platform. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
2023-09-22 08:54:09 +00:00
M: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
R: Dai Okamura <okamura.dai@socionext.com>
S: Maintained
F: arch/arm/dts/uniphier-*
ARM: UniPhier: move SoC sources to mach-uniphier Move arch/arm/cpu/armv7/uniphier/* -> arch/arm/mach-uniphier/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-26 17:26:42 +00:00
F: arch/arm/mach-uniphier/
ARM: uniphier: merge ph1_ld4_defconfig and ph1_sld8_defconfig These two are similar enough to be merged into a single defconfig file. Distinguish one from another by "DEVICE_TREE" from the command line. The how-to-build in doc/README.uniphier should be also updated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-12-17 09:00:39 +00:00
F: configs/uniphier_*_defconfig
MAINTAINERS: claim maintainership of files with "uniphier" pattern The pattern "N: uniphier" can cover - drivers/serial/serial_uniphier.c - drivers/i2c/i2c-uniphier.c - drivers/i2c/i2c-uniphier-f.c - arch/arm/dts/uniphier-* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-05 05:30:24 +00:00
N: uniphier
MAINTAINERS: add me as a maintainer of UniPhier platform Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Michal Simek <monstr@monstr.eu>
2014-10-03 10:21:08 +00:00
arm64: versal-net: Add support for Versal NET platform Versal NET platform is based on Versal chip which is reusing a lot of IPs. For more information about new IPs please take a look at DT which describe currently supported devices. The patch is adding architecture and board support with soc detection algorithm. Generic setting should be very similar to Versal but it will likely diverge in longer run. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/320206853dc370ce290a4e7b6d0bb26b05206021.1663589964.git.michal.simek@amd.com
2022-09-19 12:21:02 +00:00
ARM VERSAL NET
M: Michal Simek <michal.simek@amd.com>
S: Maintained
T: git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
F: arch/arm/mach-versal-net/
soc: xilinx: versal-net: Add soc_xilinx_versal_net driver Add soc_xilinx_versal_net driver to identify the family & revision of versal-net SoC. Add Kconfig option CONFIG_SOC_XILINX_VERSAL_NET to enable/disable this driver. To enable this driver by default, add this config to xilinx_versal_net_virt_defconfig file. This driver will be probed using platdata U_BOOT_DEVICE structure which is specified in mach-versal-net/cpu.c. Signed-off-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/613d6bcffd9070f62cf348079ed16c120f8fc56f.1668612993.git.michal.simek@amd.com
2022-11-16 15:36:35 +00:00
F: drivers/soc/soc_xilinx_versal_net.c
arm64: versal-net: Add support for Versal NET platform Versal NET platform is based on Versal chip which is reusing a lot of IPs. For more information about new IPs please take a look at DT which describe currently supported devices. The patch is adding architecture and board support with soc detection algorithm. Generic setting should be very similar to Versal but it will likely diverge in longer run. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/320206853dc370ce290a4e7b6d0bb26b05206021.1663589964.git.michal.simek@amd.com
2022-09-19 12:21:02 +00:00
N: (?<!uni)versal-net
arm64: versal: Add support for new Xilinx Versal ACAPs Xilinx is introducing Versal, an adaptive compute acceleration platform (ACAP), built on 7nm FinFET process technology. Versal ACAPs combine Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent Engines with leading-edge memory and interfacing technologies to deliver powerful heterogeneous acceleration for any application. The Versal AI Core series has five devices, offering 128 to 400 AI Engines. The series includes dual-core Arm Cortex™-A72 application processors, dual-core Arm Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more than 1,900 DSP engines optimized for high-precision floating point with low latency. The patch is adding necessary infrastructure in place without enabling platform which is done in separate patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-22 12:55:27 +00:00
ARM VERSAL
.mailmap: Start to use new amd.com email address Xilinx has been acquired by AMD that's why emails should be also updated. The patch is updating .mailmap file and also MAINTAINERS files as was done by commit 5cd1ecb99490 ("ppc: qemu: Update MAINTAINERS for correct email address"). The rest of my emails are not going to change. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-04-14 13:50:46 +00:00
M: Michal Simek <michal.simek@amd.com>
arm64: versal: Add support for new Xilinx Versal ACAPs Xilinx is introducing Versal, an adaptive compute acceleration platform (ACAP), built on 7nm FinFET process technology. Versal ACAPs combine Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent Engines with leading-edge memory and interfacing technologies to deliver powerful heterogeneous acceleration for any application. The Versal AI Core series has five devices, offering 128 to 400 AI Engines. The series includes dual-core Arm Cortex™-A72 application processors, dual-core Arm Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more than 1,900 DSP engines optimized for high-precision floating point with low latency. The patch is adding necessary infrastructure in place without enabling platform which is done in separate patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-22 12:55:27 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
arm64: versal: Add support for new Xilinx Versal ACAPs Xilinx is introducing Versal, an adaptive compute acceleration platform (ACAP), built on 7nm FinFET process technology. Versal ACAPs combine Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent Engines with leading-edge memory and interfacing technologies to deliver powerful heterogeneous acceleration for any application. The Versal AI Core series has five devices, offering 128 to 400 AI Engines. The series includes dual-core Arm Cortex™-A72 application processors, dual-core Arm Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more than 1,900 DSP engines optimized for high-precision floating point with low latency. The patch is adding necessary infrastructure in place without enabling platform which is done in separate patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-22 12:55:27 +00:00
F: arch/arm/mach-versal/
net: xilinx: axi_mrmac: Add MRMAC driver Add support for xilinx multirate(MRMAC) ethernet driver. This driver uses multichannel DMA(MCDMA) for data transfers of MRMAC. Added support for 4 ports of MRMAC for speeds 10G and 25G. MCDMA supports upto 16 channels but in this driver we have setup only one channel which is enough. Tested 10G and 25G on all 4 ports. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-02 10:40:34 +00:00
F: drivers/net/xilinx_axi_mrmac.*
soc: xilinx: versal: Add soc_xilinx_versal driver soc_xilinx_versal driver allows identification of family & revision of versal SoC. This driver is selected by CONFIG_SOC_XILINX_VERSAL. Probe this driver using platdata U_BOOT_DEVICE structure which is defined at mach-versal/cpu.c. Add this config to xilinx_versal_virt_defconfig & xilinx_versal_mini_ospi_defconfig file to select this driver. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-10 12:50:19 +00:00
F: drivers/soc/soc_xilinx_versal.c
arm64: versal: Add versal specific cadence ospi driver Add support for cadence ospi driver for Versal platform. This driver provides support for DMA read operation which utilizes cadence qspi driver. If "cdns,is-dma" DT property is specified use dma for read operation from cadence_qspi driver. As cadence_qspi_apb_dma_read() is defined in cadence_ospi_versal driver add a weak function defination in cadence_qspi driver. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/20220512100535.16364-3-ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-05-12 10:05:32 +00:00
F: drivers/spi/cadence_ospi_versal.c
watchdog: versal: Add support for Xilinx window watchdog Add support for Xilinx window watchdog, which can be found on Versal platforms. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-03-11 09:06:04 +00:00
F: drivers/watchdog/xilinx_wwdt.c
arm64: versal: Also record versal name to versal fragment Just to make sure that also drivers with versal name are assigned to proper fragment. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-09-11 07:20:41 +00:00
N: (?<!uni)versal
arm64: versal: Add support for new Xilinx Versal ACAPs Xilinx is introducing Versal, an adaptive compute acceleration platform (ACAP), built on 7nm FinFET process technology. Versal ACAPs combine Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent Engines with leading-edge memory and interfacing technologies to deliver powerful heterogeneous acceleration for any application. The Versal AI Core series has five devices, offering 128 to 400 AI Engines. The series includes dual-core Arm Cortex™-A72 application processors, dual-core Arm Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more than 1,900 DSP engines optimized for high-precision floating point with low latency. The patch is adding necessary infrastructure in place without enabling platform which is done in separate patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-22 12:55:27 +00:00
misc: Add support for the Arm Versatile Express config bus Add support for the Arm Versatile Express config bus that is being used for exposing various subsystems via a generic configuration bus. This driver adds support for generating transactions on this configuration bus and can be used by other drivers to abstract the communication with the actual function providers. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-09-28 12:43:31 +00:00
ARM VERSATILE EXPRESS DRIVERS
M: Liviu Dudau <liviu.dudau@foss.arm.com>
S: Maintained
T: git git://github.com/ARM-software/u-boot.git
F: drivers/misc/vexpress_config.c
N: vexpress
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
ARM ZYNQ
M: Michal Simek <monstr@monstr.eu>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: arch/arm/mach-zynq/
MAINTAINERS: Record documentation for Xilinx platforms Add fragment to cover documenation for Xilinx platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-16 13:25:08 +00:00
F: doc/board/xilinx/
video: seps525: Add dt binding description Added dt binding for seps525 display driver. Signed-off-by: Vikhyat Goyal <vikhyat.goyal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-02 22:21:51 +00:00
F: doc/device-tree-bindings/video/syncoam,seps525.txt
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: drivers/clk/clk_zynq.c
F: drivers/fpga/zynqpl.c
F: drivers/gpio/zynq_gpio.c
F: drivers/i2c/i2c-cdns.c
F: drivers/i2c/muxes/pca954x.c
F: drivers/i2c/zynq_i2c.c
F: drivers/mmc/zynq_sdhci.c
mtd: move NAND files into a raw/ subdirectory NAND flavors, like serial and parallel, have a lot in common and would benefit to share code. Let's move raw (parallel) NAND specific code in a raw/ subdirectory, to ease the addition of a core file in nand/ and the introduction of a spi/ subdirectory specific to SPI NANDs. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-08-16 15:30:07 +00:00
F: drivers/mtd/nand/raw/zynq_nand.c
net: phy: Add support for ethernet-phy-id with gpio reset Ethernet phy like dp83867 is using strapping resistors to setup PHY address. On Xilinx boards strapping is setup on wires which are connected to SOC where internal pull ups/downs influnce phy address. That's why there is a need to setup pins properly (via pinctrl driver for example) and then perform phy reset. I can be workarounded by reset gpio done for mdio bus but this is not working properly when multiply phys sitting on the same bus. That's why it needs to be done via ethernet-phy-id driver where dt binding has gpio reset per phy. DT binding is available here: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/ethernet-phy.yaml The driver is are reading the vendor and device id from valid phy node using ofnode_read_eth_phy_id() and creating a phy device. Kconfig PHY_ETHERNET_ID symbol is used because not every platform has gpio support. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Link: https://lore.kernel.org/r/70ab7d71c812b2c972d48c129e416c921af0d7f5.1645627539.git.michal.simek@xilinx.com
2022-02-23 14:45:42 +00:00
F: drivers/net/phy/ethernet_id.c
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: drivers/net/phy/xilinx_phy.c
F: drivers/net/zynq_gem.c
pinctrl: zynqmp: Add pinctrl driver Add pinctrl driver for Xilinx ZynqMP SOC. This driver is compatible with linux device tree parameters for configuring pinmux and pinconf. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/2d7eefa83c8c0129f7243a25de56a289e948f6c6.1645626183.git.michal.simek@xilinx.com
2022-02-23 14:23:05 +00:00
F: drivers/pinctrl/pinctrl-zynqmp.c
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: drivers/serial/serial_zynq.c
F: drivers/spi/zynq_qspi.c
F: drivers/spi/zynq_spi.c
F: drivers/usb/host/ehci-zynq.c
F: drivers/watchdog/cdns_wdt.c
MAINTAINERS: ZYNQMP: correct entries Replace references to non-existent file. Cc: Michal Simek <michal.simek@xilinx.com> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-04 07:22:03 +00:00
F: include/zynqpl.h
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: tools/zynqimage.c
N: zynq
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
arm64: Add Xilinx ZynqMP support Add basic Xilinx ZynqMP arm64 support. Serial and SD is supported. It supports emulation platfrom ep108 and QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-01-15 09:01:51 +00:00
ARM ZYNQMP
.mailmap: Start to use new amd.com email address Xilinx has been acquired by AMD that's why emails should be also updated. The patch is updating .mailmap file and also MAINTAINERS files as was done by commit 5cd1ecb99490 ("ppc: qemu: Update MAINTAINERS for correct email address"). The rest of my emails are not going to change. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-04-14 13:50:46 +00:00
M: Michal Simek <michal.simek@amd.com>
arm64: Add Xilinx ZynqMP support Add basic Xilinx ZynqMP arm64 support. Serial and SD is supported. It supports emulation platfrom ep108 and QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-01-15 09:01:51 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-17 07:22:43 +00:00
F: arch/arm/mach-zynqmp/
MAINTAINERS: Fix zynqmp clock driver path Fix c&p error from Zynq. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:50:22 +00:00
F: drivers/clk/clk_zynqmp.c
zynqmp: firmware: Add Xilinx ZynqMP firmware driver Add simple ZynqMP firmware drive to populate child nodes under zynqmp_firmware DT node. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 12:45:32 +00:00
F: driver/firmware/firmware-zynqmp.c
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: drivers/fpga/zynqpl.c
gpio: slg7xl45106: Add support for slg7xl45106 i2c gpo expander slg7xl45106 is i2c based 8-bit gpo expander, gpo pins are set and get by writing and reading corresponding gpo bit value into its data register. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/839f475cc75c97ffb3496a4caa93de2faabdbca2.1645629688.git.michal.simek@xilinx.com
2022-02-23 15:21:30 +00:00
F: drivers/gpio/gpio_slg7xl45106.c
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: drivers/gpio/zynq_gpio.c
zynqmp: gpio: Add support for zynqmp gpio modepin driver ZynqMP modepin driver has capability to get/set/check status of modepin gpios. These modepins are accessed using xilinx firmware. In modepin register, [3:0] bits set direction, [7:4] bits read IO, [11:8] bits set/clear IO. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/2d802d98fd56d95d764532a33e844d935e0cebb3.1635505900.git.michal.simek@xilinx.com
2021-10-29 11:11:43 +00:00
F: drivers/gpio/zynqmp_gpio_modepin.c
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: drivers/i2c/i2c-cdns.c
F: drivers/i2c/muxes/pca954x.c
F: drivers/i2c/zynq_i2c.c
mailbox: zynqmp: ipi mailbox driver ZynqMP mailbox driver implementing IPI communication with PMU. This would allow U-Boot SPL to communicate with PMUFW to request privileged operations. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-09-27 10:36:56 +00:00
F: drivers/mailbox/zynqmp-ipi.c
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: drivers/mmc/zynq_sdhci.c
mtd: move NAND files into a raw/ subdirectory NAND flavors, like serial and parallel, have a lot in common and would benefit to share code. Let's move raw (parallel) NAND specific code in a raw/ subdirectory, to ease the addition of a core file in nand/ and the introduction of a spi/ subdirectory specific to SPI NANDs. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-08-16 15:30:07 +00:00
F: drivers/mtd/nand/raw/zynq_nand.c
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: drivers/net/phy/xilinx_phy.c
F: drivers/net/zynq_gem.c
phy: zynqmp: Add serdes/psgtr driver Add PSGTR driver for Xilinx ZynqMP. The most of configurations are taken from Linux kernel psgtr driver. USB3.0 and SGMII configurations are tested on SOM. In SGMII case also IOU_SLCR reg is updated to get proper clock setup and signal detection configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/36e6e9d3baf8511af1916e91e4887032ca2b6c20.1641458978.git.michal.simek@xilinx.com
2022-01-06 08:49:41 +00:00
F: drivers/phy/phy-zynqmp.c
power: zynqmp: Add power domain driver for ZynqMP Driver should be enabled by CONFIG_POWER_DOMAIN=y and CONFIG_ZYNQMP_POWER_DOMAIN=y. Power domain driver doesn't have own DT node but it uses zynqmp firmware DT node that's why there is a need to bind driver when firmware node is found. Driver itself is simple. It is sending pmufw config object overlay for enabling access to device which is done in ...domain_request(). In ...domain_on() capabilities are passed and node is requested. This should be bare minimum of required to get power domain driver working. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/f4b9433b91c0b18c375b061c7a4e29d428f70547.1644226055.git.michal.simek@xilinx.com
2022-02-07 09:27:37 +00:00
F: drivers/power/domain/zynqmp-power-domain.c
pwm: Add driver for cadence TTC TTC has three modes of operations. Timer, PWM and input counters. There is already driver for timer under CADENCE_TTC_TIMER which is used for ZynqMP R5 configuration. This driver is targeting PWM which is for example configuration which can be used for fan control. The driver has been tested on Xilinx Kria SOM platform where fan is connected to one PL pin. When TTC output is connected via EMIO to PL pin TTC pwm can be configured and tested for example like this: pwm config 0 0 10000 1200 pwm enable 0 0 pwm config 0 0 10000 1400 pwm config 0 0 10000 1600 Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/915a662ddb88f7a958ca1f307e8fea59af9d7feb.1634303847.git.michal.simek@xilinx.com
2021-10-15 13:17:29 +00:00
F: drivers/pwm/pwm-cadence-ttc.c
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: drivers/serial/serial_zynq.c
reset: zynqmp: Add reset controller for ZynqMP SoC Add firmware based reset controller for Xilinx ZynqMP SoC to let other drivers to call reset functions. Driver is only tested on Xilinx ZynqMP but support for Xilinx Versal can be simply added. That's why reset_id and nr_reset are assigned in probe folder. Driver is inpired by driver from Linux kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-30 06:00:10 +00:00
F: drivers/reset/reset-zynqmp.c
rtc: zynqmp: Add support for ZynqMP RTC The whole driver logic is taken from Linux kernel but only set/get/reset functions are implemented. When device is power off RTC is power out of battery. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-29 08:39:08 +00:00
F: drivers/rtc/zynqmp_rtc.c
soc: xilinx: zynqmp: Add soc_xilinx_zynqmp driver soc_xilinx_zynqmp driver allows identification of family & revision of zynqmp SoC. This driver is selected by CONFIG_SOC_XILINX_ZYNQMP. Add this config to xilinx_zynqmp_virt_defconfig file. Probe this driver using platdata U_BOOT_DEVICE structure which is specified in mach-zynqmp/cpu.c. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-10 12:50:18 +00:00
F: drivers/soc/soc_xilinx_zynqmp.c
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: drivers/spi/zynq_qspi.c
F: drivers/spi/zynq_spi.c
timer: Add Cadence TTC timer counter support This driver was tested on Xilinx ZynqMP SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-17 11:40:46 +00:00
F: drivers/timer/cadence-ttc.c
video: seps525: Add seps525 SPI driver Add support for the WiseChip Semiconductor Inc. (UG-6028GDEBF02) display using the SEPS525 (Syncoam) LCD Controller. Syncoam Seps525 PM-Oled is RGB 160x128 display. This driver has been tested through zynq-spi driver. ZynqMP> load mmc 1 100000 rainbow.bmp 61562 bytes read in 20 ms (2.9 MiB/s) ZynqMP> bmp info 100000 Image size : 160 x 128 Bits per pixel: 24 Compression : 0 ZynqMP> bmp display 100000 ZynqMP> setenv stdout vidconsole Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-03 08:31:35 +00:00
F: drivers/video/seps525.c
video: zynqmp: Driver for Xilinx ZynqMP DisplayPort Subsystem The Xilinx ZynqMP SoC has a hardened display pipeline named DisplayPort Subsystem. It includes a buffer manager, blender, an audio mixer and a DisplayPort source controller (transmitter). The DisplayPort controller can source data from memory (non-live input) or the stream (live input). The DisplayPort controller is responsible for managing the link and physical layer functionality. The controller packs audio/video data into transfer units and sends them over the main link. The link rate and lane counts can be selected based on the application bandwidth requirements. The DisplayPort pipeline consists of the DisplayPort direct memory access (DMA) for fetching data from memory. The DisplayPort DMA controller (DPDMA) supports up to six input channels as non-live input. This driver supports the DisplayPort Subsystem and implements 1)640x480 resolution 2)RGBA8888 32bpp format 3)DPDMA channel 3 for Graphics 4)Non-live input 5)Fixed 5.4G link rate 6)Tested on ZCU102 board There will be additional work to configure GT lines based on DT, higher resolutions, support for more compressed video formats, spliting code to more files, add support for EDID, audio support, using clock framework for all clocks and in general code clean up. Codevelop-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/5c1567b63d0280dacc7efba2998857c399c25358.1684312924.git.michal.simek@amd.com
2023-05-17 08:42:10 +00:00
F: drivers/video/zynqmp/
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: drivers/watchdog/cdns_wdt.c
MAINTAINERS: ZYNQMP: correct entries Replace references to non-existent file. Cc: Michal Simek <michal.simek@xilinx.com> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-04 07:22:03 +00:00
F: include/zynqmppl.h
firmware: zynqmp: create firmware header New firmware header to place firmware specific macro and function declarations. The patch also moves the macros defining PM operations as well as some helper macros. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-09-27 10:37:01 +00:00
F: include/zynqmp_firmware.h
MAINTAINERS: Declare tools/zynqmp* as Xilinx maintained The zynqmpimage.c and the new zynqmpbif.c files are all maintained by Xilinx for the Zynq platforms. Let's match them accordingly in the MAINTAINERS file. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-13 12:18:51 +00:00
F: tools/zynqmp*
arm64: zynqmp: Add support for Avnet Ultra96 Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files and point to origin internal board name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-24 14:27:00 +00:00
N: ultra96
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
N: zynqmp
arm64: Add Xilinx ZynqMP support Add basic Xilinx ZynqMP arm64 support. Serial and SD is supported. It supports emulation platfrom ep108 and QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-01-15 09:01:51 +00:00
arm: zynqmp: Add ZynqMP minimal R5 support Xilinx ZynqMP also contains dual Cortex R5 which can run U-Boot. This patch is adding minimal support to get U-Boot boot. U-Boot on R5 runs out of DDR with default configuration that's why DDR needs to be partitioned if there is something else running on arm64. Console is done via Cadence uart driver and the first Cadence Triple Timer Counter is used for time. This configuration with uart1 was tested on zcu100-revC. U-Boot 2018.05-rc2-00021-gd058a08d907d (Apr 18 2018 - 14:11:27 +0200) Model: Xilinx ZynqMP R5 DRAM: 512 MiB WARNING: Caches not enabled MMC: In: serial@ff010000 Out: serial@ff010000 Err: serial@ff010000 Net: Net Initialization Skipped No ethernet found. ZynqMP r5> There are two ways how to run this on ZynqMP. 1. Run from ZynqMP arm64 tftpb 20000000 u-boot-r5.elf setenv autostart no && bootelf -p 20000000 cpu 4 disable && cpu 4 release 10000000 lockstep or cpu 4 disable && cpu 4 release 10000000 split 2. Load via jtag when directly to R5 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-12 15:39:46 +00:00
ARM ZYNQMP R5
.mailmap: Start to use new amd.com email address Xilinx has been acquired by AMD that's why emails should be also updated. The patch is updating .mailmap file and also MAINTAINERS files as was done by commit 5cd1ecb99490 ("ppc: qemu: Update MAINTAINERS for correct email address"). The rest of my emails are not going to change. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-04-14 13:50:46 +00:00
M: Michal Simek <michal.simek@amd.com>
arm: zynqmp: Add ZynqMP minimal R5 support Xilinx ZynqMP also contains dual Cortex R5 which can run U-Boot. This patch is adding minimal support to get U-Boot boot. U-Boot on R5 runs out of DDR with default configuration that's why DDR needs to be partitioned if there is something else running on arm64. Console is done via Cadence uart driver and the first Cadence Triple Timer Counter is used for time. This configuration with uart1 was tested on zcu100-revC. U-Boot 2018.05-rc2-00021-gd058a08d907d (Apr 18 2018 - 14:11:27 +0200) Model: Xilinx ZynqMP R5 DRAM: 512 MiB WARNING: Caches not enabled MMC: In: serial@ff010000 Out: serial@ff010000 Err: serial@ff010000 Net: Net Initialization Skipped No ethernet found. ZynqMP r5> There are two ways how to run this on ZynqMP. 1. Run from ZynqMP arm64 tftpb 20000000 u-boot-r5.elf setenv autostart no && bootelf -p 20000000 cpu 4 disable && cpu 4 release 10000000 lockstep or cpu 4 disable && cpu 4 release 10000000 split 2. Load via jtag when directly to R5 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-12 15:39:46 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
arm: zynqmp: Add ZynqMP minimal R5 support Xilinx ZynqMP also contains dual Cortex R5 which can run U-Boot. This patch is adding minimal support to get U-Boot boot. U-Boot on R5 runs out of DDR with default configuration that's why DDR needs to be partitioned if there is something else running on arm64. Console is done via Cadence uart driver and the first Cadence Triple Timer Counter is used for time. This configuration with uart1 was tested on zcu100-revC. U-Boot 2018.05-rc2-00021-gd058a08d907d (Apr 18 2018 - 14:11:27 +0200) Model: Xilinx ZynqMP R5 DRAM: 512 MiB WARNING: Caches not enabled MMC: In: serial@ff010000 Out: serial@ff010000 Err: serial@ff010000 Net: Net Initialization Skipped No ethernet found. ZynqMP r5> There are two ways how to run this on ZynqMP. 1. Run from ZynqMP arm64 tftpb 20000000 u-boot-r5.elf setenv autostart no && bootelf -p 20000000 cpu 4 disable && cpu 4 release 10000000 lockstep or cpu 4 disable && cpu 4 release 10000000 split 2. Load via jtag when directly to R5 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-12 15:39:46 +00:00
F: arch/arm/mach-zynqmp-r5/
arm: add initial support for the Phytium Durian Board This adds platform code and the device tree for the Phytium Durian Board. The initial support comprises the UART and the PCIE. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-10-31 07:51:08 +00:00
ARM PHYTIUM
M: liuhao <liuhao@phytium.com.cn>
M: shuyiqi <shuyiqi@phytium.com.cn>
S: Maintained
F: drivers/pci/pcie_phytium.c
F: arch/arm/dts/phytium-durian.dts
i2c:aspeed:support ast2600 i2c new register mode driver Add i2c new register mode driver to support AST2600 i2c new register mode. AST2600 i2c controller have legacy and new register mode. The new register mode have global register support 4 base clock for scl clock selection, and new clock divider mode. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2023-01-30 06:19:24 +00:00
ASPEED AST2600 I2C DRIVER
M: Ryan Chen <ryan_chen@aspeedtech.com>
R: Aspeed BMC SW team <BMC-SW@aspeedtech.com>
S: Maintained
F: drivers/i2c/ast2600_i2c.c
spi: aspeed: Add ASPEED SPI controller driver Add ASPEED BMC FMC/SPI memory controller driver with spi-mem interface for AST2500 and AST2600 platform. There are three SPI memory controllers embedded in an ASPEED SoC. - FMC: Named as Firmware Memory Controller. After AC on, MCU ROM fetches initial device boot image from FMC chip select(CS) 0. - SPI1: Play the role of a SPI Master controller. Or, there is a dedicated path for HOST(X86) to access its BIOS flash mounted under BMC. spi-aspeed-smc.c implements the control sequence when SPI1 is a SPI master. - SPI2: It is a pure SPI flash controller. For most scenarios, flashes mounted under it are for pure storage purpose. ASPEED SPI controller supports 1-1-1, 1-1-2 and 1-1-4 SPI flash mode. Three types of command mode are supported, normal mode, command read/write mode and user mode. - Normal mode: Default mode. After power on, normal read command 03h or 13h is used to fetch boot image from SPI flash. - AST2500: Only 03h command can be used after power on or reset. - AST2600: If FMC04[6:4] is set, 13h command is used, otherwise, 03h command. The address length is decided by FMC04[2:0]. - Command mode: SPI controller can send command and address automatically when CPU read/write the related remapped or decoded address area. The command used by this mode can be configured by FMC10/14/18[23:16]. Also, the address length is decided by FMC04[2:0]. This mode will be implemented in the following patch series. - User mode: It is a traditional and pure SPI operation, where SPI transmission is controlled by CPU. It is the main mode in this patch. Each SPI controller in ASPEED SoC has its own decoded address mapping. Within each SPI controller decoded address, driver can assign a specific address region for each CS of a SPI controller. The decoded address cannot overlap to each other. With normal mode and command mode, the decoded address accessed by the CPU determines which CS is active. When user mode is adopted, the CS decoded address is a FIFO, CPU can send/receive any SPI transmission by accessing the related decoded address for the target CS. This patch only implements user mode initially. Command read/write mode will be implemented in the following patches. Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
2022-08-19 09:01:04 +00:00
ASPEED FMC SPI DRIVER
M: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
M: Cédric Le Goater <clg@kaod.org>
R: Aspeed BMC SW team <BMC-SW@aspeedtech.com>
S: Maintained
F: drivers/spi/spi-aspeed-smc.c
binman: Add myself as maintainer Add an entry for my maintainership of this tool. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-26 03:07:26 +00:00
BINMAN
M: Simon Glass <sjg@chromium.org>
MAINTAINERS: Add Alper as a binman maintainer I ended up learning most of binman internals while trying to add a few features to it, and I recently started reviewing binman series that would not affect me personally. I'll keep working on it and try to do more reviews. Add myself as a maintainer for binman. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Acked-by: Tom Rini <trini@konsulko.com>
2022-04-22 15:25:47 +00:00
M: Alper Nebi Yasak <alpernebiyasak@gmail.com>
binman: Add myself as maintainer Add an entry for my maintainership of this tool. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-26 03:07:26 +00:00
S: Maintained
F: tools/binman/
blk: blkmap: Add basic infrastructure blkmaps are loosely modeled on Linux's device mapper subsystem. The basic idea is that you can create virtual block devices whose blocks can be backed by a plethora of sources that are user configurable. This change just adds the basic infrastructure for creating and removing blkmap devices. Subsequent changes will extend this to add support for actual mappings. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-16 15:33:49 +00:00
BLKMAP
M: Tobias Waldekranz <tobias@waldekranz.com>
S: Maintained
cmd: blkmap: Add blkmap command Add a frontend for the blkmap subsystem. In addition to the common block device operations, this allows users to create and destroy devices, and map in memory and slices of other block devices. With that we support two primary use-cases: - Being able to "distro boot" from a RAM disk. I.e., from an image where the kernel is stored in /boot of some filesystem supported by U-Boot. - Accessing filesystems not located on exact partition boundaries, e.g. when a filesystem image is wrapped in an FIT image and stored in a disk partition. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-16 15:33:52 +00:00
F: cmd/blkmap.c
doc: blkmap: Add introduction and examples Explain block maps by going through two common use-cases. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-16 15:33:54 +00:00
F: doc/usage/blkmap.rst
blk: blkmap: Add basic infrastructure blkmaps are loosely modeled on Linux's device mapper subsystem. The basic idea is that you can create virtual block devices whose blocks can be backed by a plethora of sources that are user configurable. This change just adds the basic infrastructure for creating and removing blkmap devices. Subsequent changes will extend this to add support for actual mappings. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-16 15:33:49 +00:00
F: drivers/block/blkmap.c
F: include/blkmap.h
test: blkmap: Add test suite Verify that: - Block maps can be created and destroyed - Mappings aren't allowed to overlap - Multiple mappings can be attached and be read/written from/to Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-16 15:33:53 +00:00
F: test/dm/blkmap.c
blk: blkmap: Add basic infrastructure blkmaps are loosely modeled on Linux's device mapper subsystem. The basic idea is that you can create virtual block devices whose blocks can be backed by a plethora of sources that are user configurable. This change just adds the basic infrastructure for creating and removing blkmap devices. Subsequent changes will extend this to add support for actual mappings. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-16 15:33:49 +00:00
bootstd: Add the concept of a bootflow A bootflow encapsulates the process used to boot an operating system. It typically has a control file (such as extlinux.conf) and information about which 'bootdev' it came from. Add the header file for this first, since it is needed by all other files. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:05 +00:00
BOOTDEVICE
M: Simon Glass <sjg@chromium.org>
S: Maintained
bootstd: Add the bootdev uclass A 'bootdev' is a device which can be used to boot an operating system. It is a child of the media device (e.g. MMC) which handles reading files from that device, such as a bootflow file. Add a uclass for bootdev and the various helpers needed to make it work. Also add a binding file, empty for now. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:07 +00:00
F: boot/bootdev*.c
bootstd: Add support for bootflows Add support for bootflows, including maintaining a list of them and iterating to find them. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:09 +00:00
F: boot/bootflow.c
F: boot/bootmeth*.c
bootstd: Add the bootstd uclass and core implementation The 'bootstd' device provides the central information about U-Boot standard boot. Add a uclass for bootstd and the various helpers needed to make it work. Also add a binding file. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:06 +00:00
F: boot/bootstd.c
bootstd: Add a bootdev command Add a 'bootdev' command to handle listing and selection of bootdevs. Disable standard boot for a few boards which otherwise run out of space. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:10 +00:00
F: cmd/bootdev.c
bootstd: Add an implementation of distro boot Add a bootmeth driver which handles distro boot from a disk, so we can boot a bootflow using this commonly used mechanism. In effect, this provides the same functionality as the 'sysboot' command and shares the same code. But the interface into it is via a bootmeth. For now this requires the 'pxe' command be enabled. Future work may tidy this up so that it can be used without CONFIG_CMDLINE being enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:13 +00:00
F: cmd/bootflow.c
bootstd: doc: Add documentation Add documentation for this feature, including the commands and full devicetree bindings. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:26 +00:00
F: doc/develop/bootstd.rst
F: doc/usage/bootdev.rst
F: doc/usage/bootflow.rst
F: doc/usage/bootmeth.rst
bootstd: mmc: Add a bootdev driver Add a bootdev driver for MMC. It mostly just calls the bootdev helper function. Add a function to obtain the block device for an MMC controller. Fix up the comment for mmc_get_blk_desc() while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:14 +00:00
F: drivers/mmc/mmc_bootdev.c
bootstd: Add an implementation of distro boot Add a bootmeth driver which handles distro boot from a disk, so we can boot a bootflow using this commonly used mechanism. In effect, this provides the same functionality as the 'sysboot' command and shares the same code. But the interface into it is via a bootmeth. For now this requires the 'pxe' command be enabled. Future work may tidy this up so that it can be used without CONFIG_CMDLINE being enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:13 +00:00
F: include/bootdev.h
bootstd: Add the concept of a bootflow A bootflow encapsulates the process used to boot an operating system. It typically has a control file (such as extlinux.conf) and information about which 'bootdev' it came from. Add the header file for this first, since it is needed by all other files. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:05 +00:00
F: include/bootflow.h
bootstd: Add the bootmeth uclass and helpers A bootmeth is a method of locating an operating system. For now, just add the uclass itself. Drivers for particular bootmeths are added later. If no bootmeths devices are included in the devicetree, create them automatically. This avoids the need for boilerplate in the devicetree files. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:08 +00:00
F: include/bootmeth.h
bootstd: Add the bootdev uclass A 'bootdev' is a device which can be used to boot an operating system. It is a child of the media device (e.g. MMC) which handles reading files from that device, such as a bootflow file. Add a uclass for bootdev and the various helpers needed to make it work. Also add a binding file, empty for now. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:07 +00:00
F: include/bootstd.h
bootstd: ethernet: Add a bootdev driver Add a bootdev driver for Ethernet. It can use the PXE boot mechanism to locate a file, added later. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:15 +00:00
F: net/eth_bootdevice.c
bootstd: Add tests for bootstd including all uclasses Add a set of combined tests for the bootdev, bootflow and bootmeth commands, along with associated functionality. Expand the sandbox console-recording limit so that these can work. These tests rely on a filesystem script which is not yet added to the Python tests. It is included here as a shell script. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:24 +00:00
F: test/boot/
bootstd: Add the concept of a bootflow A bootflow encapsulates the process used to boot an operating system. It typically has a control file (such as extlinux.conf) and information about which 'bootdev' it came from. Add the header file for this first, since it is needed by all other files. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:05 +00:00
MAINTAINERS: add myself as maintainer of fs/btrfs Signed-off-by: Marek Behún <marek.behun@nic.cz>
2020-03-25 11:04:46 +00:00
BTRFS
treewide: Fix Marek's name and change my e-mail address Fix diacritics in some instances of my name and change my e-mail address to kabel@kernel.org. Add corresponding .mailmap entries. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-06-01 15:17:06 +00:00
M: Marek Behún <kabel@kernel.org>
MAINTAINERS: Add btrfs mailing list and myself as reviewer Since the current code base is mostly from btrfs-progs, anyone contributing to U-Boot btrfs code could also help us to improve btrfs-progs and btrfs kernel module. Also add myself as designated reviewer. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2020-06-24 16:03:16 +00:00
R: Qu Wenruo <wqu@suse.com>
L: linux-btrfs@vger.kernel.org
MAINTAINERS: add myself as maintainer of fs/btrfs Signed-off-by: Marek Behún <marek.behun@nic.cz>
2020-03-25 11:04:46 +00:00
S: Maintained
F: cmd/btrfs.c
F: fs/btrfs/
F: include/btrfs.h
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
BUILDMAN
M: Simon Glass <sjg@chromium.org>
S: Maintained
F: tools/buildman/
MAINTAINERS: Re-order CAAM section This file is in alphabetical order, move CAAM up to where it should be. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-07-18 16:20:28 +00:00
CAAM
M: Gaurav Jain <gaurav.jain@nxp.com>
S: Maintained
F: arch/arm/dts/ls1021a-twr-u-boot.dtsi
F: drivers/crypto/fsl/
F: include/fsl_sec.h
cmd: cat: add new command Add cat command to print file content to standard out Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Roger Knecht <rknecht@pm.me>
2022-09-03 11:34:53 +00:00
CAT
M: Roger Knecht <rknecht@pm.me>
S: Maintained
F: cmd/cat.c
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
CFI FLASH
M: Stefan Roese <sr@denx.de>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-cfi-flash.git
MAINTAINERS: CFI flash maintainership only includes the CFI related files All the other files in drivers/mtd/* are not really CFI related. So lets only include the files that are CFI specific. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Scott Wood <scottwood@freescale.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Jagan Teki <jagannadh.teki@gmail.com> Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Acked-by: Heiko Schocher <hs@denx.de>
2014-10-31 12:57:42 +00:00
F: drivers/mtd/cfi_flash.c
F: drivers/mtd/jedec_flash.c
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
clk: Add MAINTAINERS entry for clocks (./drivers/clk/) The clock subsystem needs active maintenance as it steadily grows. I do offer my help for this task. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-06-24 13:50:52 +00:00
CLOCK
M: Lukasz Majewski <lukma@denx.de>
clk: Add myself as a maintainer for the clock subsystem Lukasz has not been very responsive in reviewing clock patches. Add myself as a maintainer. Signed-off-by: Sean Anderson <seanga2@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2021-11-24 04:23:40 +00:00
M: Sean Anderson <seanga2@gmail.com>
clk: Add MAINTAINERS entry for clocks (./drivers/clk/) The clock subsystem needs active maintenance as it steadily grows. I do offer my help for this task. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-06-24 13:50:52 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-clk.git
clk: Add MAINTAINERS entry for clocks (./drivers/clk/) The clock subsystem needs active maintenance as it steadily grows. I do offer my help for this task. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-06-24 13:50:52 +00:00
F: drivers/clk/
F: drivers/clk/imx/
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
COLDFIRE
MAINTAINERS: Switch nxp.com domain freescale.com domain is no longer reachable, so switch the maintainers' emails to nxp.com domain instead. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-05-01 18:54:39 +00:00
M: Huan Wang <alison.wang@nxp.com>
MAINTAINERS: m68k: Change Angelo's email address Set my new current personal email. Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
2023-01-30 19:54:50 +00:00
M: Angelo Dureghello <angelo@kernel-space.org>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-coldfire.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/m68k/
m68k: Remove ARCH= references from documentation When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. While in here, add the doc file to the MAINTAINERS entry for coldfire. Cc: Huan Wang <alison.wang@nxp.com> Cc: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-26 18:36:53 +00:00
F: doc/arch/m68k.rst
MAINTAINERS: add myself as mcf_wdt.c maintainer Signed-off-by: Angelo Dureghello <angelo@kernel-space.org> --- Changes for v2: - none Changes for v3: - none
2023-06-25 19:32:20 +00:00
F: drivers/watchdog/mcf_wdt.c
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
cyclic: Add basic support for cyclic function execution infrastruture Add the basic infrastructure to periodically execute code, e.g. all 100ms. Examples for such functions might be LED blinking etc. The functions that are hooked into this cyclic list should be small timewise as otherwise the execution of the other code that relies on a high frequent polling (e.g. UART rx char ready check) might be delayed too much. This patch also adds the Kconfig option CONFIG_CYCLIC_MAX_CPU_TIME_US, which configures the max allowed time for such a cyclic function. If it's execution time exceeds this time, this cyclic function will get removed from the cyclic list. How is this cyclic functionality executed? The following patch integrates the main function responsible for calling all registered cyclic functions cyclic_run() into the common WATCHDOG_RESET macro. This guarantees that cyclic_run() is executed very often, which is necessary for the cyclic functions to get scheduled and executed at their configured periods. This cyclic infrastructure will be used by a board specific function on the NIC23 MIPS Octeon board, which needs to check periodically, if a PCIe FLR has occurred. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-02 11:57:48 +00:00
CYCLIC
M: Stefan Roese <sr@denx.de>
S: Maintained
cyclic: Add 'cyclic list' and 'cyclic demo' commands This patch adds the cyclic command, which currently only supports the 'list' subcommand, to list all currently registered cyclic functions. Here an example: => cyclic list function: cyclic_demo, cpu-time: 7010 us, frequency: 99.80 times/s function: cyclic_demo2, cpu-time: 1 us, frequency: 1.13 times/s As you can see, the cpu-time is accounted, so that cyclic functions that take too long might be discovered. Additionally the frequency is logged. The 'cyclic demo' commands registers the cyclic_demo() function to be executed all 'cycletime_ms' milliseconds. The only thing this function does is delaying by 'delay_us' microseconds. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-02 11:57:51 +00:00
F: cmd/cyclic.c
cyclic: Add basic support for cyclic function execution infrastruture Add the basic infrastructure to periodically execute code, e.g. all 100ms. Examples for such functions might be LED blinking etc. The functions that are hooked into this cyclic list should be small timewise as otherwise the execution of the other code that relies on a high frequent polling (e.g. UART rx char ready check) might be delayed too much. This patch also adds the Kconfig option CONFIG_CYCLIC_MAX_CPU_TIME_US, which configures the max allowed time for such a cyclic function. If it's execution time exceeds this time, this cyclic function will get removed from the cyclic list. How is this cyclic functionality executed? The following patch integrates the main function responsible for calling all registered cyclic functions cyclic_run() into the common WATCHDOG_RESET macro. This guarantees that cyclic_run() is executed very often, which is necessary for the cyclic functions to get scheduled and executed at their configured periods. This cyclic infrastructure will be used by a board specific function on the NIC23 MIPS Octeon board, which needs to check periodically, if a PCIe FLR has occurred. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-02 11:57:48 +00:00
F: common/cyclic.c
F: include/cyclic.h
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
DFU
MAINTAINERS: DFU: Change e-mail address of DFU maintanier Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-01-15 23:04:10 +00:00
M: Lukasz Majewski <lukma@denx.de>
MAINTAINERS: usb gadget: add Mattijs It seems that Lukasz and Marek could get some help in maintaining the usb gadget drivers. Assign myself as maintainer. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2023-10-05 13:04:25 +00:00
M: Mattijs Korpershoek <mkorpershoek@baylibre.com>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-dfu.git
dfu: usb: Update MAINTAINERS file regarding DFU/USB gadget support Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-03-30 15:22:21 +00:00
F: cmd/dfu.c
F: cmd/usb_*.c
F: common/dfu.c
F: common/update.c
MAINTAINERS: add dfu.h and dfu.rst to DFU include/dfu.h and doc/api/dfu.rst belong to the device firmware update sub-system. So let's add them to DFU in MAINTAINERS. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-24 10:02:14 +00:00
F: doc/api/dfu.rst
doc: move README.dfu to HTML documentation Move README.dfu to doc/usage/dfu.rst and convert to reStructured text. In the long run this page should be split into two. One for the overview and one for the dfu command. UEFI capsule updates and dfutftp should be integrated into the overview page. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-05 11:58:37 +00:00
F: doc/usage/dfu.rst
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: drivers/dfu/
MAINTAINERS: Add F: drivers/usb/gadget to DFU custodian responsibility After discussion during the last u-boot mini summit with USB maintainer - Marek Vasut - it has been decided, that gadget development should be coordinated by DFU custodian. Such patch formalizes current development status. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2015-02-26 12:23:49 +00:00
F: drivers/usb/gadget/
MAINTAINERS: add dfu.h and dfu.rst to DFU include/dfu.h and doc/api/dfu.rst belong to the device firmware update sub-system. So let's add them to DFU in MAINTAINERS. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-24 10:02:14 +00:00
F: include/dfu.h
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
DRIVER MODEL
M: Simon Glass <sjg@chromium.org>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-dm.git
MAINTAINERS: add doc/driver-model/ to DRIVER MODEL The documentation should rest with the same maintainer as the code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-20 21:24:52 +00:00
F: doc/driver-model/
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: drivers/core/
F: include/dm/
F: test/dm/
efi: Add a separate maintainer entry for the app Separate this out slightly from the payload, with a new entry. We might consider renaming EFI PAYLOAD to EFI LOADER, but that would require quite a lot of file changes. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-25 00:30:18 +00:00
EFI APP
M: Simon Glass <sjg@chromium.org>
M: Heinrich Schuchardt <xypron.glpk@gmx.de>
S: Maintained
W: https://u-boot.readthedocs.io/en/latest/develop/uefi/u-boot_on_efi.html
efi: Create a 64-bit app Most modern platforms use 64-bit EFI so it is useful to have a U-Boot app that runs under that. Add a (non-functional) build for this. Note that --whole-archive causes the gcc 9.2 linker to crash, so disable this for now. Once this is resolved, things should work. For now, avoid mentioning the documentation for the 64-bit app, since it does not work. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-04 03:09:07 +00:00
F: board/efi/efi-x86_app
F: configs/efi-x86_app*
F: doc/develop/uefi/u-boot_on_efi.rst
efi: Add uclass for devices provided by UEFI firmware UCLASS_EFI_LOADER is used for devices created by applications and drivers loaded by U-Boots UEFI implementation. This patch provides a new uclass (UCLASS_EFI_MEDIA) to be used for devices that provided by a UEFI firmware calling U-Boot as an EFI application. If the two uclasses can be unified, is left to future redesign. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-04 15:56:31 +00:00
F: drivers/block/efi-media-uclass.c
F: drivers/block/sb_efi_media.c
efi: Add a separate maintainer entry for the app Separate this out slightly from the payload, with a new entry. We might consider renaming EFI PAYLOAD to EFI LOADER, but that would require quite a lot of file changes. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-25 00:30:18 +00:00
F: lib/efi/efi_app.c
efi: Add a script to build an image for testing on UEFI It is quite complicated to run U-Boot on QEMU since we have four different builds and they must use different versions of qemu and the UEFI binaries. Add a script to help. It requires U-Boot itself to be built. Once that is done you can use this script to build an image for use with qemu and optionally run it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-04 03:09:03 +00:00
F: scripts/build-efi.sh
efi: Add uclass for devices provided by UEFI firmware UCLASS_EFI_LOADER is used for devices created by applications and drivers loaded by U-Boots UEFI implementation. This patch provides a new uclass (UCLASS_EFI_MEDIA) to be used for devices that provided by a UEFI firmware calling U-Boot as an EFI application. If the two uclasses can be unified, is left to future redesign. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-04 15:56:31 +00:00
F: test/dm/efi_media.c
efi: Add a separate maintainer entry for the app Separate this out slightly from the payload, with a new entry. We might consider renaming EFI PAYLOAD to EFI LOADER, but that would require quite a lot of file changes. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-25 00:30:18 +00:00
efi_loader: Add MAINTAINERS entry Now that everything's in place, let's add myself as the maintainer for the efi payload support. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-04 00:10:10 +00:00
EFI PAYLOAD
efi_loader: Swap roles with Heinrich Heinrich is going to take over maintainership of the efi_loader tree going forward. To ensure that I will still receive review mails at least, add me as reviewer with a stable email address. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-14 13:35:17 +00:00
M: Heinrich Schuchardt <xypron.glpk@gmx.de>
MAINTAINERS: add Ilias Apalodimas to EFI PAYLOAD as co-maintainer Ilias has since long been reviewing UEFI patches. Now he has volunteered to assist me in maintaining the sub-system. Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-07-12 10:38:42 +00:00
M: Ilias Apalodimas <ilias.apalodimas@linaro.org>
efi_loader: Add MAINTAINERS entry Now that everything's in place, let's add myself as the maintainer for the efi payload support. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-04 00:10:10 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-efi.git
MAINTAINERS: add arch/arm/lib/*_efi.* to EFI_PAYLOAD The files arch/arm/lib/*_efi.* are only relevant for the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-11-06 09:23:55 +00:00
F: arch/arm/lib/*_efi.*
MAINTAINERS: add UEFI commands to EFI PAYLOAD Add the following files to EFI PAYLOAD: - cmd/bootefi.c - cmd/efidebug.c - cmd/eficonfig.c - cmd/nvedit_efi.c Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-11-10 11:23:35 +00:00
F: cmd/bootefi.c
F: cmd/eficonfig.c
F: cmd/efidebug.c
F: cmd/nvedit_efi.c
MAINTAINERS: set maintainer for doc/api/efi.rst doc/api/efi.rst belongs to the UEFI sub-system documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-22 06:45:50 +00:00
F: doc/api/efi.rst
MAINTAINERS: correct the path of UEFI docs Change the path from doc/uefi to doc/develop/uefi. Fixes: commit d1ceeeff6c2e ("doc: Move UEFI under develop/") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-20 07:09:46 +00:00
F: doc/develop/uefi/*
tools: mkeficapsule: add man page Add a man page for mkeficapsule command. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-02-09 10:10:36 +00:00
F: doc/mkeficapsule.1
doc: man-page for bootefi command Provide a description of the bootefi command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-16 21:08:38 +00:00
F: doc/usage/bootefi.rst
rtc: provide an emulated RTC On a board without hardware clock this software real time clock can be used. The build time is used to initialize the RTC. So you will have to adjust the time either manually using the 'date' command or use the 'sntp' to update the RTC with the time from a network time server. See CONFIG_CMD_SNTP and CONFIG_BOOTP_NTPSERVER. The RTC time is advanced according to CPU ticks. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-22 21:52:14 +00:00
F: drivers/rtc/emul_rtc.c
efi_loader: capitalization table This patch provides a define to initialize a table that maps lower to capital letters for Unicode code point 0x0000 - 0xffff. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-04 17:34:55 +00:00
F: include/capitalization.h
MAINTAINERS: assign include/charset.h Assign include/charset.h to EFI PAYLOAD. The functions defined in this include are used by the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-08 17:41:35 +00:00
F: include/charset.h
efi_loader: EFI_UNICODE_COLLATION_PROTOCOL The patch implements the EFI_UNICODE_COLLATION_PROTOCOL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-04 17:34:58 +00:00
F: include/cp1250.h
F: include/cp437.h
efi_selftest: provide an EFI selftest application A testing framework for the EFI API is provided. It can be executed with the 'bootefi selftest' command. It is coded in a way that at a later stage we may turn it into a standalone EFI application. The current build system does not allow this yet. All tests use a driver model and are run in three phases: setup, execute, teardown. A test may be setup and executed at boottime, it may be setup at boottime and executed at runtime, or it may be setup and executed at runtime. After executing all tests the system is reset. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-15 08:06:11 +00:00
F: include/efi*
efi_loader: fix building crt0 on arm Before the patch an undefined constant EFI_SUBSYSTEM was used in the crt0 code. The current version of binutils does not swallow the error. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=888403 The necessary constant IMAGE_SUBSYSTEM_EFI_APPLICATION is already defined in pe.h. So let's factor out asm-generic/pe.h for the image subsystem constants and use it in our assembler code. IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER does not exist in the specification let's use IMAGE_SUBSYSTEM_EFI_ROM instead. The include pe.h is only used in code maintained by Alex so let him be the maintainer here too. Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-31 18:45:35 +00:00
F: include/pe.h
F: include/asm-generic/pe.h
MAINTAINERS: get rid of the optee variables entry Since I am co-maintaining EFI with Heinrich remove the special entry for EFI variable storage via OP-TEE Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-10-06 08:41:24 +00:00
F: include/mm_communication.h
MAINTAINERS: assign lib/charset.c lib/charset.c is only used by the EFI subsystem. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-05 17:43:50 +00:00
F: lib/charset.c
MAINTAINERS: correct entry for lib/efi*/ lib/efi* indicates files efi* in directory lib. lib/efi*/ indicates all files in directories lib/efi*. Fixes: 623b3a579765 efi_selftest: provide an EFI selftest application Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-02 15:00:45 +00:00
F: lib/efi*/
test: provide tests for efi_image_region_add() Provide unit tests for efi_image_region_add(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-01 18:01:53 +00:00
F: test/lib/efi_*
efi_selftest: provide an EFI selftest application A testing framework for the EFI API is provided. It can be executed with the 'bootefi selftest' command. It is coded in a way that at a later stage we may turn it into a standalone EFI application. The current build system does not allow this yet. All tests use a driver model and are run in three phases: setup, execute, teardown. A test may be setup and executed at boottime, it may be setup at boottime and executed at runtime, or it may be setup and executed at runtime. After executing all tests the system is reset. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-15 08:06:11 +00:00
F: test/py/tests/test_efi*
MAINTAINERS: assign test/py/tests/test_efi*/ to EFI PAYLOAD Some UEFI related files are not assigned currently. Add them to the EFI PAYLOAD area. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-22 15:53:34 +00:00
F: test/py/tests/test_efi*/
test: unit tests for Unicode functions Provide unit tests for Unicode functions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-08-31 19:31:28 +00:00
F: test/unicode_ut.c
efi_loader: Add MAINTAINERS entry Now that everything's in place, let's add myself as the maintainer for the efi payload support. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-04 00:10:10 +00:00
F: cmd/bootefi.c
cmd: add efidebug command Currently, there is no easy way to add or modify UEFI variables. In particular, bootmgr supports BootOrder/BootXXXX variables, it is quite hard to define them as u-boot variables because they are represented in a complicated and encoded format. The new command, efidebug, helps address these issues and give us more friendly interfaces: * efidebug boot add: add BootXXXX variable * efidebug boot rm: remove BootXXXX variable * efidebug boot dump: display all BootXXXX variables * efidebug boot next: set BootNext variable * efidebug boot order: set/display a boot order (BootOrder) Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25 06:54:38 +00:00
F: cmd/efidebug.c
cmd: env: add "-e" option for handling UEFI variables "env [print|set] -e" allows for handling uefi variables without knowing details about mapping to corresponding u-boot variables. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25 06:54:36 +00:00
F: cmd/nvedit_efi.c
MAINTAINERS: add tools/efivar.py to EFI PAYLOAD tools/efivar.py allows to prepare a file with UEFI variables to preseed the UEFI variable store. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-20 10:58:25 +00:00
F: tools/efivar.py
tools: provide a tool to convert a binary file to an include For testing EFI disk management we need an in-memory image of a disk. The tool file2include converts a file to a C include. The file is separated into strings of 8 bytes. Only the non-zero strings are written to the include. The output format has been designed to maintain readability. #define EFI_ST_DISK_IMG { 0x00010000, { \ {0x000001b8, "\x94\x37\x69\xfc\x00\x00\x00\x00"}, /* .7i..... */ \ {0x000001c0, "\x02\x00\x83\x02\x02\x00\x01\x00"}, /* ........ */ \ {0x000001c8, "\x00\x00\x7f\x00\x00\x00\x00\x00"}, /* ........ */ \ {0x000001f8, "\x00\x00\x00\x00\x00\x00\x55\xaa"}, /* ......U. */ \ ... {0x00006000, "\x48\x65\x6c\x6c\x6f\x20\x77\x6f"}, /* Hello wo */ \ {0x00006008, "\x72\x6c\x64\x21\x0a\x00\x00\x00"}, /* rld!.... */ \ {0, NULL} } } As the disk image needed for testing contains mostly zeroes a high compression ratio can be attained. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-17 19:16:09 +00:00
F: tools/file2include.c
MAINTAINERS: assign tools/mkeficapsule.c to EFI PAYLOAD tools/mkeficapsule.c is used to prepare test files for testing the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-22 19:26:34 +00:00
F: tools/mkeficapsule.c
efi_loader: Add MAINTAINERS entry Now that everything's in place, let's add myself as the maintainer for the efi payload support. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-04 00:10:10 +00:00
Update MAINTAINERS to include environment files To be maintained by me (Joe) and reviewed by Wolfgang Denk when available. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2019-11-20 22:09:05 +00:00
ENVIRONMENT
M: Joe Hershberger <joe.hershberger@ni.com>
S: Maintained
F: env/
F: include/env*
F: test/env/
F: tools/env*
F: tools/mkenvimage.c
env: Allow U-Boot scripts to be placed in a .env file At present U-Boot environment variables, and thus scripts, are defined by CONFIG_EXTRA_ENV_SETTINGS. It is painful to add large amounts of text to this file and dealing with quoting and newlines is harder than it should be. It would be better if we could just type the script into a text file and have it included by U-Boot. Add a feature that brings in a .env file associated with the board config, if present. To use it, create a file in a board/<vendor> directory, typically called <board>.env and controlled by the CONFIG_ENV_SOURCE_FILE option. The environment variables should be of the form "var=value". Values can extend to multiple lines. See the README under 'Environment Variables:' for more information and an example. In many cases environment variables need access to the U-Boot CONFIG variables to select different options. Enable this so that the environment scripts can be as useful as the ones currently in the board config files. This uses the C preprocessor, means that comments can be included in the environment using /* ... */ Also support += to allow variables to be appended to. This is needed when using the preprocessor. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Tested-by: Marek Behún <marek.behun@nic.cz>
2021-10-22 03:08:46 +00:00
ENVIRONMENT AS TEXT
M: Simon Glass <sjg@chromium.org>
S: Maintained
F: doc/usage/environment.rst
F: scripts/env2string.awk
fs/erofs: add erofs filesystem support This patch mainly deals with uncompressed files. Signed-off-by: Huang Jianan <jnhuang95@gmail.com>
2022-02-26 07:05:47 +00:00
EROFS
M: Huang Jianan <jnhuang95@gmail.com>
L: linux-erofs@lists.ozlabs.org
S: Maintained
fs/erofs: add filesystem commands Add 'ls' and 'load' commands. Signed-off-by: Huang Jianan <jnhuang95@gmail.com>
2022-02-26 07:05:50 +00:00
F: cmd/erofs.c
fs/erofs: add erofs filesystem support This patch mainly deals with uncompressed files. Signed-off-by: Huang Jianan <jnhuang95@gmail.com>
2022-02-26 07:05:47 +00:00
F: fs/erofs/
F: include/erofs.h
test/py: Add tests for the erofs Add Python scripts to test 'ls' and 'load' commands, as well as test related filesystem functions. Signed-off-by: Huang Jianan <jnhuang95@gmail.com>
2022-02-26 07:05:51 +00:00
F: test/py/tests/test_fs/test_erofs.py
fs/erofs: add erofs filesystem support This patch mainly deals with uncompressed files. Signed-off-by: Huang Jianan <jnhuang95@gmail.com>
2022-02-26 07:05:47 +00:00
event: Add basic support for events Add a way to create and dispatch events without needing to allocate memory. Also add a way to 'spy' on events, thus allowing 'hooks' to be created. Use a linker list for static events, which we can use to replace functions like arch_cpu_init_f(). Allow an EVENT_DEBUG option which makes it easier to see what is going on at runtime, but uses more code space. Dynamic events allow the creation of a spy at runtime. This is not always necessary, but can be enabled with EVENT_DYNAMIC if needed. A 'test' event is the only option for now. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-04 15:43:00 +00:00
EVENTS
M: Simon Glass <sjg@chromium.org>
S: Maintained
event: Add a command Add a command to show the available events. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-04 15:43:06 +00:00
F: cmd/event.c
event: Add basic support for events Add a way to create and dispatch events without needing to allocate memory. Also add a way to 'spy' on events, thus allowing 'hooks' to be created. Use a linker list for static events, which we can use to replace functions like arch_cpu_init_f(). Allow an EVENT_DEBUG option which makes it easier to see what is going on at runtime, but uses more code space. Dynamic events allow the creation of a spy at runtime. This is not always necessary, but can be enabled with EVENT_DYNAMIC if needed. A 'test' event is the only option for now. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-04 15:43:00 +00:00
F: common/event.c
F: include/event.h
event: Add a script to decode the event-spy list For debugging and dicoverability it is useful to be able to see a list of each event spy in a U-Boot ELF file. Add a script which shows this, along with the event type and the source location. This makes events a little easier to use than weak functions, for example. Add a basic sandbox test as well. We could provide a test for other boards, but for now, few use events. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-04 15:43:07 +00:00
F: scripts/event_dump.py
event: Add a simple test Add a test for event registration and activation. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-04 15:43:01 +00:00
F: test/common/event.c
event: Add a script to decode the event-spy list For debugging and dicoverability it is useful to be able to see a list of each event spy in a U-Boot ELF file. Add a script which shows this, along with the event type and the source location. This makes events a little easier to use than weak functions, for example. Add a basic sandbox test as well. We could provide a test for other boards, but for now, few use events. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-04 15:43:07 +00:00
F: test/py/tests/test_event_dump.py
event: Add basic support for events Add a way to create and dispatch events without needing to allocate memory. Also add a way to 'spy' on events, thus allowing 'hooks' to be created. Use a linker list for static events, which we can use to replace functions like arch_cpu_init_f(). Allow an EVENT_DEBUG option which makes it easier to see what is going on at runtime, but uses more code space. Dynamic events allow the creation of a spy at runtime. This is not always necessary, but can be enabled with EVENT_DYNAMIC if needed. A 'test' event is the only option for now. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-04 15:43:00 +00:00
fastboot: Add maintainers entry Add an entry in maintainers for fastboot. It is starting off orphaned, but hopefully someone can pick it up. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-11-24 04:33:11 +00:00
FASTBOOT
MAINTAINERS: fastboot: add Mattijs Fastboot has been marked as orphaned since 2021. Since I'm interested in maintaining this, assign myself. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2023-10-05 13:04:26 +00:00
M: Mattijs Korpershoek <mkorpershoek@baylibre.com>
S: Maintained
fastboot: Add maintainers entry Add an entry in maintainers for fastboot. It is starting off orphaned, but hopefully someone can pick it up. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-11-24 04:33:11 +00:00
F: cmd/fastboot.c
F: doc/android/fastboot*.rst
F: include/fastboot.h
F: include/fastboot-internal.h
net: add fastboot TCP support Known limitations are 1. fastboot reboot doesn't work (answering OK but not rebooting) 2. flashing isn't supported (TCP transport only limitation) The command syntax is fastboot tcp Signed-off-by: Dmitrii Merkurev <dimorinny@google.com> Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Simon Glass <sjg@chromium.org> Сс: Joe Hershberger <joe.hershberger@ni.com> Сс: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-12 18:49:30 +00:00
F: include/net/fastboot_tcp.h
F: include/net/fastboot_udp.h
fastboot: Add maintainers entry Add an entry in maintainers for fastboot. It is starting off orphaned, but hopefully someone can pick it up. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-11-24 04:33:11 +00:00
F: drivers/fastboot/
F: drivers/usb/gadget/f_fastboot.c
net: add fastboot TCP support Known limitations are 1. fastboot reboot doesn't work (answering OK but not rebooting) 2. flashing isn't supported (TCP transport only limitation) The command syntax is fastboot tcp Signed-off-by: Dmitrii Merkurev <dimorinny@google.com> Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Simon Glass <sjg@chromium.org> Сс: Joe Hershberger <joe.hershberger@ni.com> Сс: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-12 18:49:30 +00:00
F: net/fastboot_tcp.c
F: net/fastboot_udp.c
fastboot: Add maintainers entry Add an entry in maintainers for fastboot. It is starting off orphaned, but hopefully someone can pick it up. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-11-24 04:33:11 +00:00
F: test/dm/fastboot.c
MAINTAINERS: Add myself as the FPGA maintainer FPGA subsystem requires special care that's why it should be maintained via one tree. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-18 15:03:13 +00:00
FPGA
.mailmap: Start to use new amd.com email address Xilinx has been acquired by AMD that's why emails should be also updated. The patch is updating .mailmap file and also MAINTAINERS files as was done by commit 5cd1ecb99490 ("ppc: qemu: Update MAINTAINERS for correct email address"). The rest of my emails are not going to change. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-04-14 13:50:46 +00:00
M: Michal Simek <michal.simek@amd.com>
MAINTAINERS: Add myself as the FPGA maintainer FPGA subsystem requires special care that's why it should be maintained via one tree. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-18 15:03:13 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
MAINTAINERS: Add myself as the FPGA maintainer FPGA subsystem requires special care that's why it should be maintained via one tree. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-18 15:03:13 +00:00
F: drivers/fpga/
F: cmd/fpga.c
F: include/fpga.h
dm: fpga: Introduce new uclass For future DM based FPGA drivers and for now to have a meaningful logging class for old FPGA drivers. Suggested-by: Michal Simek <michal.simek@amd.com> Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Dahl <post@lespocky.de> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/20220930120430.42307-2-post@lespocky.de Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-09-30 12:04:30 +00:00
F: test/dm/fpga.c
MAINTAINERS: Add myself as the FPGA maintainer FPGA subsystem requires special care that's why it should be maintained via one tree. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-18 15:03:13 +00:00
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
FLATTENED DEVICE TREE
M: Simon Glass <sjg@chromium.org>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-fdt.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: lib/fdtdec*
F: lib/libfdt/
F: include/fdt*
MAINTAINERS: FLATTENED DEVICE TREE: correct maintained path Change due to commit b08c8c487083 ("libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-12 22:08:09 +00:00
F: include/linux/libfdt*
MAINTAINERS: Fix syntax and update filename for FDT Let get_maintainers.pl pick up the new cmd/fdt.c. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-26 16:14:00 +00:00
F: cmd/fdt.c
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: common/fdt_support.c
Revert "kbuild: remove unused dtc-version.sh script" We need this to make building dtc optional. It makes no sense to build our own dtc if the system one works correctly. This reverts commit ddb87a0b40262ff99d675e946f57427642303938. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-22 17:34:43 +00:00
F: scripts/dtc-version.sh
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
FREEBSD
M: Rafal Jaworowski <raj@semihalf.com>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-freebsd.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
FREESCALE QORIQ
MAINTAINERS: Change fsl-qoriq, mpc86xx, mpc85xx maintainers Change maintainers to Priyanka Jain for fsl-qoriq, mpc85xx Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Acked-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-09-09 11:25:08 +00:00
M: Priyanka Jain <priyanka.jain@nxp.com>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git
driver: watchdog: add sp805 watchdog support sp805 is watchdog on some NXP layerscape SoCs, adding it's driver. Configs CONFIG_WDT_SP805, CONFIG_WDT, CONFIG_CMD_WDT needs to be enabled to use it. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-07 03:16:09 +00:00
F: drivers/watchdog/sp805_wdt.c
Watchdog: introduce ARM SBSA watchdog driver According to Server Base System Architecture (SBSA) specification, the SBSA Generic Watchdog has two stage timeouts: the first signal (WS0) is for alerting the system by interrupt, the second one (WS1) is a real hardware reset. More details about the hardware specification of this device: ARM DEN0029B - Server Base System Architecture (SBSA) This driver can operate ARM SBSA Generic Watchdog as a single stage In the single stage mode, when the timeout is reached, your system will be reset by WS1. The first signal (WS0) is ignored. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-10 08:55:18 +00:00
F: drivers/watchdog/sbsa_gwdt.c
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
drivers: misc: add Gateworks System Controller driver Add a driver for the Gateworks System Controller used on Gateworks boards which provides a boot watchdog, power control, temperature monitor, and voltage ADCs. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-03-08 00:24:04 +00:00
GATEWORKS_SC
M: Tim Harvey <tharvey@gateworks.com>
S: Maintained
F: drivers/misc/gsc.c
F: include/gsc.h
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
I2C
M: Heiko Schocher <hs@denx.de>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-i2c.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: drivers/i2c/
MAINTAINERS: Add entry for kwbimage / kwboot tools Add entry for these tools with Marek, Pali and Stefan as maintainers. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-08-25 12:49:39 +00:00
KWBIMAGE / KWBOOT TOOLS
M: Pali Rohár <pali@kernel.org>
treewide: Fix Marek's name and change my e-mail address Fix diacritics in some instances of my name and change my e-mail address to kabel@kernel.org. Add corresponding .mailmap entries. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-06-01 15:17:06 +00:00
M: Marek Behún <kabel@kernel.org>
MAINTAINERS: Add entry for kwbimage / kwboot tools Add entry for these tools with Marek, Pali and Stefan as maintainers. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-08-25 12:49:39 +00:00
M: Stefan Roese <sr@denx.de>
S: Maintained
T: git https://source.denx.de/u-boot/custodians/u-boot-marvell.git
F: doc/README.kwbimage
F: doc/kwboot.1
F: tools/kwb*
led: led_pwm: Add a driver for LEDs connected to PWM Add a driver which allows to use of LEDs connected to PWM (Linux compatible). MAINTAINERS: add i.vozvakhov as a maintainer of leds-pwm C(required during new functionality adding). Signed-off-by: Ivan Vozvakhov <i.vozvakhov@corp.mail.ru>
2022-03-12 10:03:14 +00:00
LED
M: Ivan Vozvakhov <i.vozvakhov@vk.team>
S: Supported
F: doc/device-tree-bindings/leds/leds-pwm.txt
F: drivers/led/led_pwm.c
log: Add an implementation of logging Add the logging header file and implementation with some configuration options to control it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-04 20:48:24 +00:00
LOGGING
M: Simon Glass <sjg@chromium.org>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/u-boot.git
log: syslog driver Provide a log driver that broadcasts RFC 3164 messages to syslog servers. rsyslog is one implementation of such a server. The messages are sent to the local broadcast address 255.255.255.255 on port 514. The environment variable log_hostname can be used to provide the HOSTNAME field for the messages. The optional TIMESTAMP field of RFC 3164 is not provided. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-02-26 20:48:16 +00:00
F: common/log*
log: Add an implementation of logging Add the logging header file and implementation with some configuration options to control it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-04 20:48:24 +00:00
F: cmd/log.c
doc: move README.log to HTML documentation Convert README.log to reStructuredText and add it to the generated HTML documentation. Assign doc/develop/logging.rst to the maintainer of LOGGING. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-31 08:46:12 +00:00
F: doc/develop/logging.rst
MAINTAINERS: assign include/log.h include/log.h belongs to LOGGING. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-30 08:08:12 +00:00
F: include/log.h
lib: Add getopt Some commands can get very unweildy if they have too many positional arguments. Adding options makes them easier to read, remember, and understand. This implementation of getopt has been taken from barebox, which has had option support for quite a while. I have made a few modifications to their version, such as the removal of opterr in favor of a separate getopt_silent function. In addition, I have moved all global variables into struct getopt_context. The getopt from barebox also re-orders the arguments passed to it so that non-options are placed last. This allows users to specify options anywhere. For example, `ls -l foo/ -R` would be re-ordered to `ls -l -R foo/` as getopt parsed the options. However, this feature conflicts with the const argv in cmd_tbl->cmd. This was originally added in 54841ab50c ("Make sure that argv[] argument pointers are not modified."). The reason stated in that commit is that hush requires argv to stay unmodified. Has this situation changed? Barebox also uses hush, and does not have this problem. Perhaps we could use their fix? I have assigned maintenance of getopt to Simon Glass, as it is currently only used by the log command. I would also be fine maintaining it. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-27 23:55:36 +00:00
F: lib/getopt.c
test: log functions with CONFIG_LOG=n If CONFIG_LOG=n, we still expect output for log_err(), log_warning(), log_notice(), log_info() and in case of DEBUG=1 also for log_debug(). Provide unit tests verifying this. The tests depend on: CONFIG_CONSOLE_RECORD=y CONFIG_LOG=n CONFIG_UT_LOG=y It may be necessary to increase the value of CONFIG_SYS_MALLOC_F_LEN to accommodate CONFIG_CONSOLE_RECORD=y. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-02-26 20:48:18 +00:00
F: test/log/
log: test: Add a pytest for logging Add a test which tries out various filters and options to make sure that logging works as expected. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-04 20:48:30 +00:00
F: test/py/tests/test_log.py
log: Add an implementation of logging Add the logging header file and implementation with some configuration options to control it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-04 20:48:24 +00:00
video: Add support for Arm's Mali Display Processors Add support for Arm Mali Display Processors DP500, DP550 and DP650. Only one layer is being used to display the console or boot logo, even if more layers are supported in the hardware. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28 12:50:53 +00:00
MALI DISPLAY PROCESSORS
M: Liviu Dudau <liviu.dudau@foss.arm.com>
S: Supported
T: git git://github.com/ARM-software/u-boot.git
F: drivers/video/mali_dp.c
i2c: fix: Add support for the Arm's Versatile Express I2C controller accidentially while fixing merge errors for patch: https://lists.denx.de/pipermail/u-boot/2018-September/342278.html missed to add files: MAINTAINERS drivers/i2c/Kconfig drivers/i2c/Makefile add them with this patch. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-10-11 05:26:33 +00:00
F: drivers/i2c/i2c-versatile.c
video: Add support for Arm's Mali Display Processors Add support for Arm Mali Display Processors DP500, DP550 and DP650. Only one layer is being used to display the console or boot logo, even if more layers are supported in the hardware. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28 12:50:53 +00:00
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
MICROBLAZE
M: Michal Simek <monstr@monstr.eu>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/microblaze/
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: cmd/mfsl.c
F: drivers/gpio/xilinx_gpio.c
F: drivers/net/xilinx_axi_emac.c
F: drivers/net/xilinx_emaclite.c
F: drivers/serial/serial_xuartlite.c
F: drivers/spi/xilinx_spi.c
sysreset: Add support for gpio-restart The Linux kernel has binding for gpio-restart node. This patch is adding basic support without supporting any optional properties. This driver was tested on Microblaze system where gpio is connected to SoC reset logic. Output value is handled via gpios cells values. In gpio_reboot_request() set_value is writing 1 because dm_gpio_set_value() is capable to changing it when it is ACTIVE_LOW. ... if (desc->flags & GPIOD_ACTIVE_LOW) value = !value; ... Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-13 09:04:56 +00:00
F: drivers/sysreset/sysreset_gpio.c
microblaze: Convert axi timer to DM driver Move axi timer driver from Microblaze to generic location. Origin implementation was irq based with counting down timer. CONFIG_TIMER drivers are designed differently that timer is free running up timer with automatic reload without any interrupt. Information about clock rates are find out in timer_pre_probe() that's why there is no need to get any additional information from DT in the driver itself (only register offset). Signed-off-by: Michal Simek <michal.simek@amd.com> Tested-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/6c12fc86bbc1f17d05c25018862e7b7b03346b36.1654684731.git.michal.simek@amd.com
2022-06-24 12:16:32 +00:00
F: drivers/timer/xilinx-timer.c
MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-13 10:07:25 +00:00
F: drivers/watchdog/xilinx_tb_wdt.c
N: xilinx
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
MIPS
M: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-mips.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/mips/
MAINTAINERS, git-mailrc: cortina: add Custodian for Cortina Access Inc. Assign Alex Nemirovsky as custodian for all Cortina Access (CA) for ARM and MIPS based SoCs. Currently Cortina Access CAxxxx family of SoCs support both ARM and MIPS ISA. Drivers have cross platform support for both architectures. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-01-30 20:34:54 +00:00
MIPS CORTINA ACCESS CAxxxx
M: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
S: Supported
F: board/cortina/common/
F: drivers/gpio/cortina_gpio.c
F: drivers/watchdog/cortina_wdt.c
F: drivers/serial/serial_cortina.c
led: led_cortina: Add CAxxx LED support Add Cortina Access LED controller support for CAxxxx SOCs Signed-off-by: Jway Lin <jway.lin@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Simon Glass <sjg@chromium.org> Add head file fixed link error and remove unused flashing function Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-01 04:08:06 +00:00
F: drivers/led/led_cortina.c
mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs Initial DesignWare based DM support for Cortina Access CAxxxx SoCs. Signed-off-by: Arthur Li <arthur.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-21 02:19:35 +00:00
F: drivers/mmc/ca_dw_mmc.c
spi: ca_sflash: Add CAxxxx SPI Flash Controller Add SPI Flash controller driver for Cortina Access CAxxxx SoCs Signed-off-by: Pengpeng Chen <pengpeng.chen@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Vignesh R <vigneshr@ti.com> CC: Tom Rini <trini@konsulko.com> [jagan: rebase on master] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-30 19:52:45 +00:00
F: drivers/spi/ca_sflash.c
i2c: i2c-cortina: added CAxxxx I2C support Add I2C controller support for Cortina Access CAxxxx SoCs Signed-off-by: Arthur Li <arthur.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> hs: fixed build error, add include log.h
2020-06-01 19:56:31 +00:00
F: drivers/i2c/i2c-cortina.c
F: drivers/i2c/i2c-cortina.h
net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs Add Cortina Access Ethernet device driver for CAxxxx SoCs. This driver supports both legacy and DM_ETH network models. Signed-off-by: Aaron Tseng <aaron.tseng@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> Signed-off-by: Abbie Chang <abbie.chang@cortina-access.com> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Abbie Chang <abbie.chang@Cortina-Access.com> CC: Tom Rini <trini@konsulko.com>
2021-01-14 21:34:11 +00:00
F: drivers/net/cortina_ni.c
F: drivers/net/cortina_ni.h
net: phy: ca_phy: Add driver for CAxxxx SoCs Add phy driver support for MACs embedded inside Cortina Access SoCs Signed-off-by: Abbie Chang <abbie.chang@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Tom Rini <trini@konsulko.com> CC: Aaron Tseng <aaron.tseng@cortina-access.com> Moved out PHY specific code out of Cortina NI Ethernet driver and into a Cortina Access PHY interface driver
2021-01-14 21:34:12 +00:00
F: drivers/net/phy/ca_phy.c
MAINTAINERS, git-mailrc: cortina: add Custodian for Cortina Access Inc. Assign Alex Nemirovsky as custodian for all Cortina Access (CA) for ARM and MIPS based SoCs. Currently Cortina Access CAxxxx family of SoCs support both ARM and MIPS ISA. Drivers have cross platform support for both architectures. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-01-30 20:34:54 +00:00
MAINTAINERS: add maintainer for MediaTek MIPS platform Update maintainer for MediaTek MIPS platform Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-11-12 08:37:19 +00:00
MIPS MEDIATEK
M: Weijie Gao <weijie.gao@mediatek.com>
R: GSS_MTK_Uboot_upstream <GSS_MTK_Uboot_upstream@mediatek.com>
S: Maintained
F: arch/mips/mach-mtmips/
F: arch/mips/dts/mt7620.dtsi
MAINTAINERS: update maintainer for MediaTek MIPS platform Update maintainer for MediaTek MIPS platform Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-05-20 03:24:16 +00:00
F: arch/mips/dts/mt7621.dtsi
MAINTAINERS: add maintainer for MediaTek MIPS platform Update maintainer for MediaTek MIPS platform Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-11-12 08:37:19 +00:00
F: arch/mips/dts/mt7620-u-boot.dtsi
MAINTAINERS: update maintainer for MediaTek MIPS platform Update maintainer for MediaTek MIPS platform Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-05-20 03:24:16 +00:00
F: arch/mips/dts/mt7621-u-boot.dtsi
MAINTAINERS: add maintainer for MediaTek MIPS platform Update maintainer for MediaTek MIPS platform Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-11-12 08:37:19 +00:00
F: include/configs/mt7620.h
MAINTAINERS: update maintainer for MediaTek MIPS platform Update maintainer for MediaTek MIPS platform Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-05-20 03:24:16 +00:00
F: include/configs/mt7621.h
MAINTAINERS: add maintainer for MediaTek MIPS platform Update maintainer for MediaTek MIPS platform Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-11-12 08:37:19 +00:00
F: include/dt-bindings/clock/mt7620-clk.h
MAINTAINERS: update maintainer for MediaTek MIPS platform Update maintainer for MediaTek MIPS platform Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-05-20 03:24:16 +00:00
F: include/dt-bindings/clock/mt7621-clk.h
MAINTAINERS: add maintainer for MediaTek MIPS platform Update maintainer for MediaTek MIPS platform Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-11-12 08:37:19 +00:00
F: include/dt-bindings/clock/mt7628-clk.h
F: include/dt-bindings/reset/mt7620-reset.h
MAINTAINERS: update maintainer for MediaTek MIPS platform Update maintainer for MediaTek MIPS platform Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-05-20 03:24:16 +00:00
F: include/dt-bindings/reset/mt7621-reset.h
MAINTAINERS: add maintainer for MediaTek MIPS platform Update maintainer for MediaTek MIPS platform Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-11-12 08:37:19 +00:00
F: include/dt-bindings/reset/mt7628-reset.h
F: drivers/clk/mtmips/
F: drivers/pinctrl/mtmips/
F: drivers/gpio/mt7620_gpio.c
MAINTAINERS: update maintainer for MediaTek MIPS platform Update maintainer for MediaTek MIPS platform Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-05-20 03:24:16 +00:00
F: drivers/mtd/nand/raw/mt7621_nand.c
F: drivers/mtd/nand/raw/mt7621_nand.h
F: drivers/mtd/nand/raw/mt7621_nand_spl.c
MAINTAINERS: add maintainer for MediaTek MIPS platform Update maintainer for MediaTek MIPS platform Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-11-12 08:37:19 +00:00
F: drivers/net/mt7620-eth.c
F: drivers/phy/mt7620-usb-phy.c
F: drivers/reset/reset-mtmips.c
F: drivers/serial/serial_mt7620.c
F: drivers/spi/mt7620_spi.c
F: drivers/sysreset/sysreset_resetctl.c
F: drivers/watchdog/mt7620_wdt.c
MSCC: add support for Ocelot SoCs This family of SoCs are found in the Microsemi Switches solution and have already a support in the linux kernel. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-14 15:16:47 +00:00
MIPS MSCC
M: Gregory CLEMENT <gregory.clement@bootlin.com>
M: Lars Povlsen <lars.povlsen@microchip.com>
M: Horatiu Vultur <horatiu.vultur@microchip.com>
S: Maintained
F: arch/mips/mach-mscc/
MSCC: add board support for the Luton based evaluation board Adding the support for the Luton boards PCB91 which share common code with the Ocelots boards, including board code, device tree and configuration. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-14 15:16:50 +00:00
F: arch/mips/dts/luton*
MSCC: add board support for the Ocelots based evaluation boards Adding the support for 2 boards sharing common code for Ocelot chip: PCB120 and PCB123 Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-14 15:16:49 +00:00
F: arch/mips/dts/mscc*
F: arch/mips/dts/ocelot*
MSCC: Add device tree for Jaguar2 board Add device tree based on evaluation board pcb110. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-12 17:56:57 +00:00
F: arch/mips/dts/jr2*
MSCC: add device tree for Serval2 board Add device tree based on evaluation board pcb112. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-12 17:56:59 +00:00
F: arch/mips/dts/serval*
MSCC: add board support for the Ocelots based evaluation boards Adding the support for 2 boards sharing common code for Ocelot chip: PCB120 and PCB123 Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-14 15:16:49 +00:00
F: board/mscc/
F: configs/mscc*
mips: mscc_sgpio: Add the MSCC serial GPIO device (SIO) This add support for the the MSCC serial GPIO driver in MSCC VCoreIII-based SOCs. By using a serial interface, the SIO controller significantly extends the number of available GPIOs with a minimum number of additional pins on the device. The primary purpose of the SIO controller is to connect control signals from SFP modules and to act as an LED controller. This adds the base driver. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-02 08:52:21 +00:00
F: drivers/gpio/mscc_sgpio.c
mips: spi: mscc: Add fast bitbang SPI driver This patch add a new SPI driver for MSCC SOCs that does not sport the designware SPI hardware controller. Performance gain: 7.664 seconds vs. 17.633 for 1 Mbyte write. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-08 09:38:33 +00:00
F: drivers/spi/mscc_bb_spi.c
MSCC: add board support for the Ocelots based evaluation boards Adding the support for 2 boards sharing common code for Ocelot chip: PCB120 and PCB123 Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-14 15:16:49 +00:00
F: include/configs/vcoreiii.h
net: mscc: ocelot: Update DTS for Ocelot pcb120. Update device tree for ocelot to add support for ocelot pcb120. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-24 09:27:59 +00:00
F: include/dt-bindings/mscc/
pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family The Jaguar2 SOC family has 63 gpio pins therefore I extended mscc-common to support new numbe of pins and remove any platform dependency from mscc-common. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-12 17:56:55 +00:00
F: drivers/pinctrl/mscc/
net: mscc: Move ocelot_switch to mscc_eswitch folder Move file ocelot_switch to mscc_eswitch to prepare to add new net drivers for other MSCC SoCs. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-31 14:30:33 +00:00
F: drivers/net/mscc_eswitch/
MSCC: add support for Ocelot SoCs This family of SoCs are found in the Microsemi Switches solution and have already a support in the linux kernel. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-14 15:16:47 +00:00
mips: jz47xx: Add JZ4780 SoC support Add initial support for the Ingenic JZ47xx MIPS SoC. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-16 22:25:22 +00:00
MIPS JZ4780
M: Ezequiel Garcia <ezequiel@collabora.com>
S: Maintained
F: arch/mips/mach-jz47xx/
mips: octeon: Initial minimal support for the Marvell Octeon SoC This patch adds very basic support for the Octeon III SoCs. Only CFI parallel NOR flash and UART is supported for now. Please note that the basic Octeon port does not include the DDR3/4 initialization yet. This will be added in some follow-up patches later. To still use U-Boot on with this port, the L2 cache (4MiB on Octeon III CN73xx) is used as RAM. This way, U-Boot can boot to the prompt on such boards. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:56 +00:00
MIPS Octeon
M: Aaron Williams <awilliams@marvell.com>
S: Maintained
F: arch/mips/mach-octeon/
F: arch/mips/include/asm/arch-octeon/
mips: octeon: dts: Add Octeon 3 cn73xx base dtsi file This patch adds the base dtsi file for the Octeon 3 cn73xx SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:57 +00:00
F: arch/mips/dts/mrvl,cn73xx.dtsi
mips: octeon: Initial minimal support for the Marvell Octeon SoC This patch adds very basic support for the Octeon III SoCs. Only CFI parallel NOR flash and UART is supported for now. Please note that the basic Octeon port does not include the DDR3/4 initialization yet. This will be added in some follow-up patches later. To still use U-Boot on with this port, the L2 cache (4MiB on Octeon III CN73xx) is used as RAM. This way, U-Boot can boot to the prompt on such boards. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:56 +00:00
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
MMC
MAINTAINERS, git-mailrc: Update the mmc maintainer Update the mmc maintainer from Jaehoon to me. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Marek Vasut <marex@denx.de>
2019-04-24 11:56:58 +00:00
M: Peng Fan <peng.fan@nxp.com>
MAINTAINER, git-mailrc: Update the mmc maintainer Update to me as co-maintainer with Peng. Additionally, update the mmc alias in git-mailrc. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2021-06-14 22:16:36 +00:00
M: Jaehoon Chung <jh80.chung@samsung.com>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-mmc.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: drivers/mmc/
MAINTAINERS: bring sections into alphabetic order NETWORK should be after NAND_FLASH. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-07 03:04:29 +00:00
NETWORK
M: Joe Hershberger <joe.hershberger@ni.com>
MAINTAINERS: Add maintainer to network subsystem Add myself as co maintainer to network subsystem Acked-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2021-01-29 16:18:22 +00:00
M: Ramon Fried <rfried.dev@gmail.com>
MAINTAINERS: bring sections into alphabetic order NETWORK should be after NAND_FLASH. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-07 03:04:29 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-net.git
MAINTAINERS: bring sections into alphabetic order NETWORK should be after NAND_FLASH. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-07 03:04:29 +00:00
F: drivers/net/
net: assign maintainer for include/net.h include/net.h currently has no maintainer. Assign include/net.h to the maintainer of the NET subsystem. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-14 19:55:25 +00:00
F: include/net.h
MAINTAINERS: bring sections into alphabetic order NETWORK should be after NAND_FLASH. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-07 03:04:29 +00:00
F: net/
MAINTAINERS: bring sections into alphabetic order POWER should be after ONENAND Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-05 07:15:51 +00:00
NIOS
M: Thomas Chou <thomas@wytron.com.tw>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-nios.git
MAINTAINERS: bring sections into alphabetic order POWER should be after ONENAND Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-05 07:15:51 +00:00
F: arch/nios2/
MAINTAINERS: Add an entry for NVMe This was missed when NVMe support was initially brought to U-Boot back in 2017. Add an entry for it and list myself as the maintainer. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-06-22 13:16:23 +00:00
NVMe
M: Bin Meng <bmeng.cn@gmail.com>
S: Maintained
F: drivers/nvme/
F: cmd/nvme.c
F: include/nvme.h
F: doc/develop/driver-model/nvme.rst
drivers/mtd/nvmxip: introduce NVM XIP block storage emulation add block storage emulation for NVM XIP flash devices Some paltforms such as Corstone-1000 need to see NVM XIP raw flash as a block storage device with read only capability. Here NVM flash devices are devices with addressable memory (e.g: QSPI NOR flash). The implementation is generic and can be used by different platforms. Two drivers are provided as follows. nvmxip-blk : a generic block driver allowing to read from the XIP flash nvmxip Uclass driver : When a device is described in the DT and associated with UCLASS_NVMXIP, the Uclass creates a block device and binds it with the nvmxip-blk. Platforms can use multiple NVM XIP devices at the same time by defining a DT node for each one of them. Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
2023-04-17 09:11:52 +00:00
NVMXIP
M: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
S: Maintained
F: doc/develop/driver-model/nvmxip.rst
drivers/mtd/nvmxip: introduce QSPI XIP driver add nvmxip_qspi driver under UCLASS_NVMXIP The device associated with this driver is the parent of the blk#<id> device nvmxip_qspi can be reused by other platforms. If the platform has custom settings to apply before using the flash, then the platform can provide its own parent driver belonging to UCLASS_NVMXIP and reuse nvmxip-blk driver. The custom driver can be implemented like nvmxip_qspi in addition to the platform custom settings. Platforms can use multiple NVM XIP devices at the same time by defining a DT node for each one of them. For more details please refer to doc/develop/driver-model/nvmxip_qspi.rst Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
2023-04-17 09:11:53 +00:00
F: doc/device-tree-bindings/nvmxip/nvmxip_qspi.txt
drivers/mtd/nvmxip: introduce NVM XIP block storage emulation add block storage emulation for NVM XIP flash devices Some paltforms such as Corstone-1000 need to see NVM XIP raw flash as a block storage device with read only capability. Here NVM flash devices are devices with addressable memory (e.g: QSPI NOR flash). The implementation is generic and can be used by different platforms. Two drivers are provided as follows. nvmxip-blk : a generic block driver allowing to read from the XIP flash nvmxip Uclass driver : When a device is described in the DT and associated with UCLASS_NVMXIP, the Uclass creates a block device and binds it with the nvmxip-blk. Platforms can use multiple NVM XIP devices at the same time by defining a DT node for each one of them. Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
2023-04-17 09:11:52 +00:00
F: drivers/mtd/nvmxip/
sandbox64: add a test case for UCLASS_NVMXIP provide a test for NVM XIP devices The test case allows to make sure of the following: - The NVM XIP QSPI devices are probed - The DT entries are read correctly - the data read from the flash by the NVMXIP block driver is correct Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
2023-04-17 09:11:58 +00:00
F: test/dm/nvmxip.c
drivers/mtd/nvmxip: introduce NVM XIP block storage emulation add block storage emulation for NVM XIP flash devices Some paltforms such as Corstone-1000 need to see NVM XIP raw flash as a block storage device with read only capability. Here NVM flash devices are devices with addressable memory (e.g: QSPI NOR flash). The implementation is generic and can be used by different platforms. Two drivers are provided as follows. nvmxip-blk : a generic block driver allowing to read from the XIP flash nvmxip Uclass driver : When a device is described in the DT and associated with UCLASS_NVMXIP, the Uclass creates a block device and binds it with the nvmxip-blk. Platforms can use multiple NVM XIP devices at the same time by defining a DT node for each one of them. Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
2023-04-17 09:11:52 +00:00
misc: Add support for nvmem cells This adds support for "nvmem cells" as seen in Linux. The nvmem device class in Linux is used for various assorted ROMs and EEPROMs. In this sense, it is similar to UCLASS_MISC, but also includes UCLASS_I2C_EEPROM, UCLASS_RTC, and UCLASS_MTD. New drivers corresponding to a Linux-style nvmem device should be implemented as one of the previously-mentioned uclasses. The nvmem API acts as a compatibility layer to adapt the (slightly different) APIs of these uclasses. It also handles the lookup of nvmem cells. While nvmem devices can be accessed directly, they are most often used by reading/writing contiguous values called "cells". Cells typically hold information like calibration, versions, or configuration (such as mac addresses). nvmem devices can specify "cells" in their device tree: qfprom: eeprom@700000 { #address-cells = <1>; #size-cells = <1>; reg = <0x00700000 0x100000>; /* ... */ tsens_calibration: calib@404 { reg = <0x404 0x10>; }; }; which can then be referenced like: tsens { /* ... */ nvmem-cells = <&tsens_calibration>; nvmem-cell-names = "calibration"; }; The tsens driver could then read the calibration value like: struct nvmem_cell cal_cell; u8 cal[16]; nvmem_cell_get_by_name(dev, "calibration", &cal_cell); nvmem_cell_read(&cal_cell, cal, sizeof(cal)); Because nvmem devices are not all of the same uclass, supported uclasses must register a nvmem_interface struct. This allows CONFIG_NVMEM to be enabled without depending on specific uclasses. At the moment, nvmem_interface is very bare-bones, and assumes that no initialization is necessary. However, this could be amended in the future. Although I2C_EEPROM and MISC are quite similar (and could likely be unified), they present different read/write function signatures. To abstract over this, NVMEM uses the same read/write signature as Linux. In particular, short read/writes are not allowed, which is allowed by MISC. The functionality implemented by nvmem cells is very similar to that provided by i2c_eeprom_partition. "fixed-partition"s for eeproms does not seem to have made its way into Linux or into any device tree other than sandbox. It is possible that with the introduction of this API it would be possible to remove it. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-05-05 17:11:39 +00:00
NVMEM
M: Sean Anderson <seanga2@gmail.com>
S: Maintained
F: doc/api/nvmem.rst
F: drivers/misc/nvmem.c
reboot-mode: Add NVMEM reboot mode This adds an NVMEM reboot mode driver, similar to Linux's implementation. This allows using the same device tree binding for Linux and U-Boot in most cases. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-02 16:03:53 +00:00
F: drivers/reboot-mode/reboot-mode-nvmem.c
misc: Add support for nvmem cells This adds support for "nvmem cells" as seen in Linux. The nvmem device class in Linux is used for various assorted ROMs and EEPROMs. In this sense, it is similar to UCLASS_MISC, but also includes UCLASS_I2C_EEPROM, UCLASS_RTC, and UCLASS_MTD. New drivers corresponding to a Linux-style nvmem device should be implemented as one of the previously-mentioned uclasses. The nvmem API acts as a compatibility layer to adapt the (slightly different) APIs of these uclasses. It also handles the lookup of nvmem cells. While nvmem devices can be accessed directly, they are most often used by reading/writing contiguous values called "cells". Cells typically hold information like calibration, versions, or configuration (such as mac addresses). nvmem devices can specify "cells" in their device tree: qfprom: eeprom@700000 { #address-cells = <1>; #size-cells = <1>; reg = <0x00700000 0x100000>; /* ... */ tsens_calibration: calib@404 { reg = <0x404 0x10>; }; }; which can then be referenced like: tsens { /* ... */ nvmem-cells = <&tsens_calibration>; nvmem-cell-names = "calibration"; }; The tsens driver could then read the calibration value like: struct nvmem_cell cal_cell; u8 cal[16]; nvmem_cell_get_by_name(dev, "calibration", &cal_cell); nvmem_cell_read(&cal_cell, cal, sizeof(cal)); Because nvmem devices are not all of the same uclass, supported uclasses must register a nvmem_interface struct. This allows CONFIG_NVMEM to be enabled without depending on specific uclasses. At the moment, nvmem_interface is very bare-bones, and assumes that no initialization is necessary. However, this could be amended in the future. Although I2C_EEPROM and MISC are quite similar (and could likely be unified), they present different read/write function signatures. To abstract over this, NVMEM uses the same read/write signature as Linux. In particular, short read/writes are not allowed, which is allowed by MISC. The functionality implemented by nvmem cells is very similar to that provided by i2c_eeprom_partition. "fixed-partition"s for eeproms does not seem to have made its way into Linux or into any device tree other than sandbox. It is possible that with the introduction of this API it would be possible to remove it. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-05-05 17:11:39 +00:00
F: include/nvmem.h
phy: add nxp tja1103 phy driver Add nxp tja1103 phy driver. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-18 18:58:30 +00:00
NXP C45 TJA11XX PHY DRIVER
M: Radu Pirea <radu-nicolae.pirea@oss.nxp.com>
S: Maintained
F: drivers/net/phy/nxp-c45-tja11xx.c
MAINTAINERS: bring sections into alphabetic order POWER should be after ONENAND Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-05 07:15:51 +00:00
ONENAND
#M: Lukasz Majewski <l.majewski@majess.pl>
S: Orphaned (Since 2017-01)
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-onenand.git
MAINTAINERS: bring sections into alphabetic order POWER should be after ONENAND Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-05 07:15:51 +00:00
F: drivers/mtd/onenand/
Add out4.ru O4-iMX-NANO board Board designed for quick prototyping and has one microSD port, 2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO, UART interfaces, and 2 RGB LEDs. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
2021-05-14 21:18:31 +00:00
OUT4-IMX6ULL-NANO BOARD
M: Oleh Kravchenko <oleg@kaa.org.ua>
S: Maintained
T: git https://github.com/Oleh-Kravchenko/u-boot-out4.git
Add EV-iMX280-NANO-X-MB board A simple prototyping board with one microSD port, one Ethernet port, 2 USB ports, I2C, SPI, GPIO, and UART interfaces. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
2021-05-14 21:18:33 +00:00
F: arch/arm/dts/ev-imx280-nano-x-mb.dts
Add out4.ru O4-iMX-NANO board Board designed for quick prototyping and has one microSD port, 2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO, UART interfaces, and 2 RGB LEDs. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
2021-05-14 21:18:31 +00:00
F: arch/arm/dts/o4-imx-nano.dts
F: arch/arm/dts/o4-imx6ull-nano.dtsi
F: board/out4
Add EV-iMX280-NANO-X-MB board A simple prototyping board with one microSD port, one Ethernet port, 2 USB ports, I2C, SPI, GPIO, and UART interfaces. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
2021-05-14 21:18:33 +00:00
F: configs/ev-imx280-nano-x-mb_defconfig
Add out4.ru O4-iMX-NANO board Board designed for quick prototyping and has one microSD port, 2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO, UART interfaces, and 2 RGB LEDs. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
2021-05-14 21:18:31 +00:00
F: configs/o4-imx6ull-nano_defconfig
F: include/configs/o4-imx6ull-nano.h
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
PATMAN
M: Simon Glass <sjg@chromium.org>
S: Maintained
F: tools/patman/
drivers: pci_ep: Introduce UCLASS_PCI_EP uclass Introduce new UCLASS_PCI_EP class for handling PCI endpoint devices, allowing to set various attributes of the PCI endpoint device, such as: * configuration space header * BAR definitions * outband memory mapping * start/stop PCI link Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-27 08:15:21 +00:00
PCI Endpoint
M: Ramon Fried <rfried.dev@gmail.com>
S: Maintained
F: drivers/pci_endpoint/
F: include/pci_ep.h
pci: add DM based mpc85xx driver add DM based PCI Configuration space access support for MPC85xx PCI Bridge. This driver is based on arch/powerpc/cpu/mpc85xx/pci.c In the old driver there is a fix for a hw issue on the TARGET_MPC8555CDS and TARGET_MPC8541CDS boards. As I have no such hardware I did not port this part. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-14 09:29:39 +00:00
PCI MPC85xx
M: Heiko Schocher <hs@denx.de>
S: Maintained
F: drivers/pci/pci_mpc85xx.c
test: Add test for new command pci_mps Adds a test for the new pci_mps command to ensure that it can set the Maximum Payload Size (MPS) of all devices to 256 bytes in the sandbox environment. Enables the pci_mps command in the sandbox environment so that this test can be run. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
2023-03-10 19:07:15 +00:00
PCI MPS
M: Stephen Carlson <stcarlso@linux.microsoft.com>
S: Maintained
F: cmd/pci_mps.c
F: test/cmd/pci_mps.c
MAINTAINERS: bring sections into alphabetic order POWER should be after ONENAND Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-05 07:15:51 +00:00
POWER
M: Jaehoon Chung <jh80.chung@samsung.com>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-pmic.git
MAINTAINERS: bring sections into alphabetic order POWER should be after ONENAND Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-05 07:15:51 +00:00
F: drivers/power/
MAINTAINERS: add include/power/ to POWER Add the related include files to the power MAINTAINERS entry. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-19 12:55:19 +00:00
F: include/power/
MAINTAINERS: bring sections into alphabetic order POWER should be after ONENAND Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-05 07:15:51 +00:00
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
POWERPC
MAINTAINERS: remove Wolfgang Denk Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-23 22:12:47 +00:00
S: Orphan (Since 2022-10-21)
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/powerpc/
POWERPC MPC8XX
MAINTAINERS: POWERPC MPC8XX: Update email address Our email addresses have changed from @c-s.fr to @csgroup.eu Update entry in MAINTAINERS Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2020-05-13 05:30:03 +00:00
M: Christophe Leroy <christophe.leroy@csgroup.eu>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-mpc8xx.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/powerpc/cpu/mpc8xx/
POWERPC MPC83XX
MAINTAINERS: mpc83xx: Add new custodian Add myself as mpc83xx custodian.
2017-06-09 12:50:47 +00:00
M: Mario Six <mario.six@gdsys.cc>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-mpc83xx.git
ram: Add driver for MPC83xx Add a RAM driver for the MPC83xx architecture. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-06 08:23:30 +00:00
F: drivers/ram/mpc83xx_sdram.c
F: include/dt-bindings/memory/mpc83xx-sdram.h
mpc83xx: Add sysreset driver Add a sysreset driver for the MPC83xx platform. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-06 08:23:35 +00:00
F: drivers/sysreset/sysreset_mpc83xx.c
F: drivers/sysreset/sysreset_mpc83xx.h
clk: Add MPC83xx clock driver Add a clock driver for the MPC83xx architecture. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-06 08:23:36 +00:00
F: drivers/clk/mpc83xx_clk.c
F: drivers/clk/mpc83xx_clk.h
F: include/dt-bindings/clk/mpc83xx-clk.h
timer: Add MPC83xx timer driver Add a timer driver for the MPC83xx architecture. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-06 08:23:38 +00:00
F: drivers/timer/mpc83xx_timer.c
cpu: Add MPC83xx CPU driver Add a CPU driver for the MPC83xx architecture. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-06 08:23:45 +00:00
F: drivers/cpu/mpc83xx_cpu.c
F: drivers/cpu/mpc83xx_cpu.h
misc: Add MPC83xx serdes driver Add a driver to configure the SerDes (Serializer/Deserializer) lanes on the MPC83xx architecture. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-06 08:23:46 +00:00
F: drivers/misc/mpc83xx_serdes.c
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/powerpc/cpu/mpc83xx/
F: arch/powerpc/include/asm/arch-mpc83xx/
POWERPC MPC85XX
MAINTAINERS: Change POWERPC MPC85XX maintainer to Marek Behún After a discussion with Tom Rini, we've agreed that I am going to take over custodianship of the MPC85XX platform, since it seems other people do not have necessary interest or time and getting things done over there takes too long. Since I am only working on one MPC85XX board, Turris 1.x, and do not have time to do thorough reviews of patches for this entire platform (other than those concerning Turris 1.x board), for other boards I will only run patches through CI and checkpatch, and then send them via PR upwards to Tom. Signed-off-by: Marek Behún <kabel@kernel.org> Acked-by: Tom Rini <trini@konsulko.com>
2022-07-25 15:06:15 +00:00
M: Marek Behún <kabel@kernel.org>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-mpc85xx.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/powerpc/cpu/mpc85xx/
MAINTAINERS: Rename NAND FLASH to RAW NAND As there are other types of NAND flashes like SPI NAND, let's be more specific. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/all/20230213094626.50957-2-frieder@fris.de/ Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-02-13 09:46:25 +00:00
RAW NAND
M: Dario Binacchi <dario.binacchi@amarulasolutions.com>
M: Michael Trimarchi <michael@amarulasolutions.com>
S: Maintained
T: git https://source.denx.de/u-boot/custodians/u-boot-nand-flash.git
F: drivers/mtd/nand/raw/
riscv: Add Kconfig to support RISC-V Add Kconfig and makefile for RISC-V Also modify MAINTAINERS for it. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:52 +00:00
RISC-V
M: Rick Chen <rick@andestech.com>
MAINTAINERS: Add a co-maintainer for RISC-V Add Leo as co-maintainer for RISC-V. Signed-off-by: Rick Chen <rick@andestech.com>
2021-01-25 06:08:31 +00:00
M: Leo <ycliang@andestech.com>
riscv: Add Kconfig to support RISC-V Add Kconfig and makefile for RISC-V Also modify MAINTAINERS for it. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:52 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-riscv.git
riscv: Add Kconfig to support RISC-V Add Kconfig and makefile for RISC-V Also modify MAINTAINERS for it. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:52 +00:00
F: arch/riscv/
cmd: add exception command The 'exception' command allows to test exception handling. This implementation supports ARM, x86, RISC-V and the following exceptions: * 'breakpoint' - prefetch abort exception (ARM 32bit only) * 'unaligned' - data abort exception (ARM only) * 'undefined' - undefined instruction exception Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-12-26 16:20:35 +00:00
F: cmd/riscv/
doc: arch: Add document for RISC-V architecture This patch adds a brief introduction to the RISC-V architecture and the typical boot process used on a variety of RISC-V platforms. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-02-14 10:18:51 +00:00
F: doc/arch/riscv.rst
doc: document sbi command Add a man-page for the sbi command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-19 18:30:04 +00:00
F: doc/usage/sbi.rst
sysreset: provide SBI based sysreset driver Provide sysreset driver using the SBI system reset extension. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Samuel Holland <samuel@sholland.org>
2021-09-12 19:11:46 +00:00
F: drivers/sysreset/sysreset_sbi.c
riscv: Move Andes PLMT driver to drivers/timer This is a regular timer driver, and should live with the other timer drivers. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com>
2020-10-26 01:46:56 +00:00
F: drivers/timer/andes_plmt_timer.c
riscv: Rename SiFive CLINT to RISC-V ALINT As the RISC-V ACLINT specification is defined to be backward compatible with the SiFive CLINT specification, we rename SiFive CLINT to RISC-V ALINT in the source tree to be future-proof. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Rick Chen <rick@andestech.com>
2023-06-21 15:11:46 +00:00
F: drivers/timer/riscv_aclint_timer.c
riscv: Add Kconfig to support RISC-V Add Kconfig and makefile for RISC-V Also modify MAINTAINERS for it. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:52 +00:00
F: tools/prelink-riscv.c
k210: use the board vendor name rather than the marketing name "kendryte" is the marketing name for the K210 RISC-V SoC produced by Canaan Inc. Rather than "kendryte,k210", use the usual "canaan,k210" vendor,SoC compatibility string format in the device tree files and use the SoC name for file names. With these changes, the device tree files are more in sync with the Linux kernel DTS and drivers, making uboot device tree usable by the kernel. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-03-01 10:35:39 +00:00
RISC-V CANAAN KENDRYTE K210
clk: Add K210 clock support Due to the large number of clocks, I decided to use the CCF. The overall structure is modeled after the imx code. Clocks parameters are stored in several arrays, and are then instantiated at run-time. There are some translation macros (FOOIFY()) which allow for more dense packing. Signed-off-by: Sean Anderson <seanga2@gmail.com> CC: Lukasz Majewski <lukma@denx.de>
2020-06-24 10:41:11 +00:00
M: Sean Anderson <seanga2@gmail.com>
S: Maintained
k210: use the board vendor name rather than the marketing name "kendryte" is the marketing name for the K210 RISC-V SoC produced by Canaan Inc. Rather than "kendryte,k210", use the usual "canaan,k210" vendor,SoC compatibility string format in the device tree files and use the SoC name for file names. With these changes, the device tree files are more in sync with the Linux kernel DTS and drivers, making uboot device tree usable by the kernel. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-03-01 10:35:39 +00:00
F: doc/device-tree-bindings/mfd/canaan,k210-sysctl.txt
F: doc/device-tree-bindings/pinctrl/canaan,k210-fpioa.txt
F: drivers/clk/clk_k210.c
F: drivers/pinctrl/pinctrl-k210.c
F: include/k210/
clk: Add K210 clock support Due to the large number of clocks, I decided to use the CCF. The overall structure is modeled after the imx code. Clocks parameters are stored in several arrays, and are then instantiated at run-time. There are some translation macros (FOOIFY()) which allow for more dense packing. Signed-off-by: Sean Anderson <seanga2@gmail.com> CC: Lukasz Majewski <lukma@denx.de>
2020-06-24 10:41:11 +00:00
MAINTAINERS: Add entry for rng drivers Take up maintainership of random number generator drivers with Heinrich Schuchardt as the reviewer. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-10 10:23:51 +00:00
RNG
M: Sughosh Ganu <sughosh.ganu@linaro.org>
R: Heinrich Schuchardt <xypron.glpk@gmx.de>
S: Maintained
F: cmd/rng.c
doc: random number generation Add random number generation APIs to the HTML documentation. Fix style issues. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-13 10:29:52 +00:00
F: doc/api/rng.rst
MAINTAINERS: Add entry for rng drivers Take up maintainership of random number generator drivers with Heinrich Schuchardt as the reviewer. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-10 10:23:51 +00:00
F: drivers/rng/
F: drivers/virtio/virtio_rng.c
F: include/rng.h
MAINTAINERS: bring sections into alphabetic order POWER should be after ONENAND Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-05 07:15:51 +00:00
ROCKUSB
M: Eddie Cai <eddie.cai.linux@gmail.com>
S: Maintained
F: drivers/usb/gadget/f_rockusb.c
F: cmd/rockusb.c
F: doc/README.rockusb
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
SANDBOX
M: Simon Glass <sjg@chromium.org>
S: Maintained
F: arch/sandbox/
MAINTAINERS: assign doc/arch/sandbox.rst Add doc/arch/sandbox.rst to the scope of SANDBOX. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-19 18:04:57 +00:00
F: doc/arch/sandbox.rst
MAINTAINERS: assign sandbox drivers to SANDBOX Drivers should have a maintainer. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-18 09:38:11 +00:00
F: drivers/*/*sandbox*.c
test: pinmux: Add test for pin muxing This extends the pinctrl-sandbox driver to support pin muxing, and adds a test for that behaviour. The test is done in C and not python (like the existing tests for the pinctrl uclass) because it needs to call pinctrl_select_state. Another option could be to add a command that invokes pinctrl_select_state and then test everything in test/py/tests/test_pinmux.py. The pinctrl-sandbox driver now mimics the way that many pinmux devices work. There are two groups of pins which are muxed together, as well as four pins which are muxed individually. I have tried to test all normal paths. However, very few error cases are explicitly checked for. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-14 15:01:57 +00:00
F: include/dt-bindings/*/sandbox*.h
MAINTAINERS: assign include/os.h os.h is only used by the sandbox. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-05 09:26:38 +00:00
F: include/os.h
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
cmd: Add a SEAMA image load command Add a command to load SEAMA (Seattle Image), a NAND flash on-flash storage format. This type of flash image is found in some D-Link routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and DCH-M225, as well as in WD and NEC routers on the ath79 (MIPS), Broadcom BCM53xx, and RAMIPS platforms. This U-Boot command will read and decode a SEAMA image from raw NAND flash on any platform. As it is always using big endian format for the data decoding is always necessary on platforms such as ARM. The command is needed to read a SEAMA-encoded boot image on the D-Link DIR-890L router for boot from NAND flash in an upcoming port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx) architecture. A basic test and documentation is added as well. The test must be run on a target with NAND flash support and at least one resident SEAMA image in flash. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-01-31 23:16:13 +00:00
SEAMA
M: Linus Walleij <linus.walleij@linaro.org>
S: Maintained
F: cmd/seama.c
F: doc/usage/cmd/seama.rst
F: test/cmd/seama.c
arm: smh: Add semihosting entry to MAINTAINERS These files are spread all over the tree, so just use a regex. Orphaned for now, since this is more of a "one-off" series. Though I'll be happy to review patches. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-03-22 20:59:13 +00:00
SEMIHOSTING
R: Sean Anderson <sean.anderson@seco.com>
S: Orphaned
N: semihosting
cmd: setexpr: add format string handling Add format string handling operator to the setexpr command. It allows to use C or Bash like format string expressions to be evaluated with the result being stored inside the environment variable name. setexpr <name> fmt <format> [value]... The following example setexpr foo fmt "%d, 0x%x" 0x100 ff will result in $foo being set to "256, 0xff". Signed-off-by: Roland Gaudig <roland.gaudig@weidmueller.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-23 12:29:21 +00:00
SETEXPR
M: Roland Gaudig <roland.gaudig@weidmueller.com>
S: Maintained
F: cmd/printf.c
doc: usage: add description for setexpr command Add usage for the setexpr command. It has been added to describe mainly the new setexpr format string operation. Signed-off-by: Roland Gaudig <roland.gaudig@weidmueller.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-23 12:29:22 +00:00
F: doc/usage/setexpr.rst
cmd: setexpr: add format string handling Add format string handling operator to the setexpr command. It allows to use C or Bash like format string expressions to be evaluated with the result being stored inside the environment variable name. setexpr <name> fmt <format> [value]... The following example setexpr foo fmt "%d, 0x%x" 0x100 ff will result in $foo being set to "256, 0xff". Signed-off-by: Roland Gaudig <roland.gaudig@weidmueller.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-23 12:29:21 +00:00
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
SH
sh: Add myself as SH maintainer Add myself as an SH maintainer. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Tom Rini <trini@konsulko.com>
2019-05-16 20:16:54 +00:00
M: Marek Vasut <marek.vasut+renesas@gmail.com>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
M: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-sh.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/sh/
misc: add sl28cpld base driver Add a multi-function device driver which will probe its children and provides methods to access the device. Signed-off-by: Michael Walle <michael@walle.cc> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-25 12:36:24 +00:00
SL28CLPD
M: Michael Walle <michael@walle.cc>
S: Maintained
gpio: add sl28cpld driver The gpio block is part of the sl28cpld sl28cpld management controller. There are three different flavors: the usual input and output where the direction is configurable, but also input only and output only variants. Signed-off-by: Michael Walle <michael@walle.cc> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-25 12:40:24 +00:00
F: drivers/gpio/sl28cpld-gpio.c
misc: add sl28cpld base driver Add a multi-function device driver which will probe its children and provides methods to access the device. Signed-off-by: Michael Walle <michael@walle.cc> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-25 12:36:24 +00:00
F: drivers/misc/sl28cpld.c
watchdog: add sl28cpld watchdog driver The watchdog timer is part of the sl28cpld management controller. The watchdog timer usually supervises the bootloader boot-up and if it bites the failsafe bootloader will be activated. Apart from that it supports the usual board level reset and one SMARC speciality: driving the WDT_TIMEOUT# signal. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-15 22:45:43 +00:00
F: drivers/watchdog/sl28cpld-wdt.c
misc: add sl28cpld base driver Add a multi-function device driver which will probe its children and provides methods to access the device. Signed-off-by: Michael Walle <michael@walle.cc> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-25 12:36:24 +00:00
drivers: rng: add smccc trng driver Adds random number generator driver using Arm SMCCC TRNG interface to get entropy bytes from secure monitor. The driver registers as an Arm SMCCC feature driver to allow PSCI driver to bind a device for when secure monitor exposes RNG support from Arm SMCCC TRNG interface. Cc: Sughosh Ganu <sughosh.ganu@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-06-01 08:27:34 +00:00
SMCCC TRNG
M: Etienne Carriere <etienne.carriere@linaro.org>
S: Maintained
F: drivers/rng/smccc_trng.c
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
SPI
MAINTAINERS: Change Jagan's email address Missed few mails from openedev, since most of the day I look at amarulasolutions mail so update the same. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-12 13:14:34 +00:00
M: Jagan Teki <jagan@amarulasolutions.com>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-spi.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: drivers/spi/
F: include/spi*
MAINTAINERS: Add entry for SPI NAND framework and drivers In [1] Michael agreed on taking patches for SPI NAND through the RAW NAND tree. Add a dedicated entry to the MAINTAINERS file which adds Michael and Dario as maintainers and myself as reviewer. [1] https://lists.denx.de/pipermail/u-boot/2023-February/508571.html Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com> Cc: Michael Nazzareno Trimarchi <michael@amarulasolutions.com> Cc: Tom Rini <trini@konsulko.com> Link: https://lore.kernel.org/all/20230213094626.50957-1-frieder@fris.de/ Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-02-13 09:46:24 +00:00
SPI NAND
M: Dario Binacchi <dario.binacchi@amarulasolutions.com>
M: Michael Trimarchi <michael@amarulasolutions.com>
R: Frieder Schrempf <frieder.schrempf@kontron.de>
S: Maintained
T: git https://source.denx.de/u-boot/custodians/u-boot-nand-flash.git
F: drivers/mtd/nand/spi/
MAINTAINERS: Add an entry for SPI NOR Add myself as co-maintainer for U-Boot SPI NOR subsystem. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jagan@openedev.com> [jagan: drop mtd/spi file from SPI entry] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-02-05 05:59:29 +00:00
SPI-NOR
MAINTAINERS: Change Jagan's email address Missed few mails from openedev, since most of the day I look at amarulasolutions mail so update the same. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-12 13:14:34 +00:00
M: Jagan Teki <jagan@amarulasolutions.com>
MAINTAINERS: Add an entry for SPI NOR Add myself as co-maintainer for U-Boot SPI NOR subsystem. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jagan@openedev.com> [jagan: drop mtd/spi file from SPI entry] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-02-05 05:59:29 +00:00
M: Vignesh R <vigneshr@ti.com>
S: Maintained
F: drivers/mtd/spi/
F: include/spi_flash.h
F: include/linux/mtd/cfi.h
F: include/linux/mtd/spi-nor.h
Add myself as Snapdragon and SPMI maintainer - Update MAINTAINERS - Update git-mailrc Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-31 21:12:34 +00:00
SPMI
M: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
S: Maintained
F: drivers/spmi/
F: include/spmi/
fs/squashfs: new filesystem Add support for SquashFS filesystem. Right now, it does not support compression but support for zlib will be added in a follow-up commit. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-07-30 13:33:47 +00:00
SQUASHFS
MAINTAINERS: Update e-mail address Replace former professional address by my personal e-mail. Signed-off-by: Joao Marcos Costa <jmcosta944@gmail.com>
2022-07-24 15:13:34 +00:00
M: Joao Marcos Costa <jmcosta944@gmail.com>
MAINTAINERS: add myself as reviewer for SquashFS As I have followed the development of the SquashFS support in U-Boot as part of Joao Marcos work, it makes sense to get Cc'ed on contributions/bug reports related to the squashfs support. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-09-14 11:52:39 +00:00
R: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
MAINTAINERS: add myself as reviewer for SquashFS I also followed the development of the SquashFS support in U-Boot as part of Joao Marcos internship, so I would also appreciate receiving new contributions and bug reports related to this topic. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-09-14 15:44:36 +00:00
R: Miquel Raynal <miquel.raynal@bootlin.com>
fs/squashfs: new filesystem Add support for SquashFS filesystem. Right now, it does not support compression but support for zlib will be added in a follow-up commit. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-07-30 13:33:47 +00:00
S: Maintained
F: fs/squashfs/
F: include/sqfs.h
fs/squashfs: add filesystem commands Add 'ls' and 'load' commands. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-07-30 13:33:48 +00:00
F: cmd/sqfs.c
test/py: Add tests for the SquashFS commands Add Python scripts to test 'ls' and 'load' commands. The scripts generate a SquashFS image and clean the directory after the assertions, or if an exception is raised. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-07-30 13:33:52 +00:00
F: test/py/tests/test_fs/test_squashfs/
fs/squashfs: new filesystem Add support for SquashFS filesystem. Right now, it does not support compression but support for zlib will be added in a follow-up commit. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-07-30 13:33:47 +00:00
Add support for stack-protector Add support for stack protector for UBOOT, SPL, and TPL as well as new pytest for stackprotector Signed-off-by: Joel Peshkin <joel.peshkin@broadcom.com> Adjust UEFI build flags. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-11 09:21:58 +00:00
STACKPROTECTOR
M: Joel Peshkin <joel.peshkin@broadcom.com>
S: Maintained
F: common/stackprot.c
F: cmd/stackprot_test.c
F: test/py/tests/test_stackprotector.py
MAINTAINERS: update maintainers for broadcom ns3 platform Update MAINTAINERS for broadcom ns3 platform (TARGET_NS3). Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-15 17:19:09 +00:00
TARGET_BCMNS3
M: Bharat Gooty <bharat.gooty@broadcom.com>
M: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
S: Maintained
F: board/broadcom/bcmns3/
F: doc/README.bcmns3
F: configs/bcm_ns3_defconfig
F: include/configs/bcm_ns3.h
F: include/dt-bindings/memory/bcm-ns3-mc.h
F: arch/arm/Kconfig
F: arch/arm/dts/ns3-board.dts
F: arch/arm/dts/ns3.dtsi
F: arch/arm/cpu/armv8/bcmns3
F: arch/arm/include/asm/arch-bcmns3/
MAINTAINERS: update maintainers file for new files Update MAINTAINERS file for new files. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-20 15:11:08 +00:00
F: cmd/broadcom/Makefile
F: cmd/broadcom/chimp_boot.c
F: cmd/broadcom/nitro_image_load.c
F: cmd/broadcom/chimp_handshake.c
MAINTAINERS: update maintainers for broadcom ns3 platform Update MAINTAINERS for broadcom ns3 platform (TARGET_NS3). Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-15 17:19:09 +00:00
video: Add support for NXP's TDA19988 HDMI encoder Add support for the NXP TDA19988 HDMI encoder as used on the Juno development board from Arm. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28 12:49:31 +00:00
TDA19988 HDMI ENCODER
M: Liviu Dudau <liviu.dudau@foss.arm.com>
S: Maintained
F: drivers/video/tda19988.c
MAINTAINERS: Add maintainer for TI security related files Changes involving High-Security boards should be CC'd for additional assessment of the security implications. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-01-11 17:09:27 +00:00
TI SYSTEM SECURITY
M: Andrew F. Davis <afd@ti.com>
S: Supported
F: arch/arm/mach-omap2/omap5/sec_entry_cpu1.S
F: arch/arm/mach-omap2/sec-common.c
F: arch/arm/mach-omap2/config_secure.mk
arm: mach-k3: Add secure device support K3 devices have High Security (HS) variants along with the non-HS already supported. Like the previous generation devices (OMAP/Keystone2) K3 supports boot chain-of-trust by authenticating and optionally decrypting images as they are unpacked from FIT images. Add support for this here. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>
2019-04-12 16:54:45 +00:00
F: arch/arm/mach-k3/security.c
defconfig: Add a config for AM335x High Security EVM Add a new defconfig file for the AM335x High Security EVM. This config is specific for the case of memory device booting. Memory device booting is handled separatly from peripheral booting on HS devices as the load address changes. This defconfig is the same as for the non-secure part, except for: CONFIG_TI_SECURE_DEVICE option set to 'y' CONFIG_ISW_ENTRY_ADDR updated for secure images. CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y' CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y' CONFIG_USE_TINY_PRINTF option set to 'y' to reduce SPL size CONFIG_SPL_SYS_MALLOC_SIMPLE set to 'y' to reduce SPL size Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-27 16:39:20 +00:00
F: configs/am335x_hs_evm_defconfig
defconfigs: Add a config for AM335x High Security EVM with UART Boot support Add a new defconfig file for the AM335x High Security EVM. This config is specific for the case of UART booting Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-09-20 19:33:51 +00:00
F: configs/am335x_hs_evm_uart_defconfig
MAINTAINERS: Add maintainer for TI security related files Changes involving High-Security boards should be CC'd for additional assessment of the security implications. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-01-11 17:09:27 +00:00
F: configs/am43xx_hs_evm_defconfig
defconfigs: Add a config for AM43xx HS EVM with QSPI Boot support On AM43xx HS devices, QSPI boot is XIP and we use a single stage bootloader. Add a defconfig for this. Signed-off-by: Andrew Davis <afd@ti.com>
2022-07-15 15:58:49 +00:00
F: configs/am43xx_hs_evm_qspi_defconfig
MAINTAINERS: Add maintainer for TI security related files Changes involving High-Security boards should be CC'd for additional assessment of the security implications. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-01-11 17:09:27 +00:00
F: configs/am57xx_hs_evm_defconfig
defconfigs: Add config for AM57xx High Security EVM with USB/UART Boot support Add a new defconfig file for the AM57xx High Security EVM. This config is specific for the case of USB/UART booting. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-28 17:43:25 +00:00
F: configs/am57xx_hs_evm_usb_defconfig
MAINTAINERS: Add maintainer for TI security related files Changes involving High-Security boards should be CC'd for additional assessment of the security implications. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-01-11 17:09:27 +00:00
F: configs/dra7xx_hs_evm_defconfig
defconfigs: Add config for DRA7xx High Security EVM with USB Boot support Add a new defconfig file for the DRA7xx High Security EVM. This config is specific for the case of USB booting. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-28 17:43:24 +00:00
F: configs/dra7xx_hs_evm_usb_defconfig
MAINTAINERS: Update for Keystone2 secure devices Update Keystone2 secure device configs under "TI SYSTEM SECURITY". Without this buildman keeps complaining about the status of these boards. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Andrew F. Davis <afd@ti.com>
2017-04-26 06:05:19 +00:00
F: configs/k2hk_hs_evm_defconfig
F: configs/k2e_hs_evm_defconfig
F: configs/k2g_hs_evm_defconfig
defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfig Adds a dedicated defconfig to build TI K2L secure devices and updates MAINTAINERS. k2l_hs_evm_defconfig is created from the k2l_evm_defconfig and removes support for SPL, as SPL is not supported on K2 HS devices. Corrects SYS_TEXT_BASE for HS devices. Also adds TI_SECURE_DEVICE and FIT_IMAGE_POST_PROCESS to include support for secure image creation and authentication Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Andrew F. Davis <afd@ti.com>
2018-03-06 16:10:10 +00:00
F: configs/k2l_hs_evm_defconfig
MAINTAINERS: Add maintainer for TI security related files Changes involving High-Security boards should be CC'd for additional assessment of the security implications. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-01-11 17:09:27 +00:00
MAINTAINERS: Add entry for TPM drivers TPM drivers have currently no maintainers. Add myself since I contributed the TIS implementation. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-09 07:02:22 +00:00
TPM DRIVERS
M: Ilias Apalodimas <ilias.apalodimas@linaro.org>
S: Maintained
MAINTAINERS: add a new entry on TEE MAINTAINERS Since I do have a look on TEE patches regardless and Jens doesn't have his own tree, add myself as a co-maintainer. I'll be carrying over the TEE related patches from now on. While at it add the maintenance tree for TPM Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-01-19 15:10:57 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-tpm.git
MAINTAINERS: assign include/tpm*, cmd/tpm* The files include/tpm* are an integral part of the TPM drivers. The tpm* commands are used to access TPM devices. Both should be managed by the TPM DRIVERS maintainer. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-04-02 04:51:01 +00:00
F: cmd/tpm*
MAINTAINERS: Add entry for TPM drivers TPM drivers have currently no maintainers. Add myself since I contributed the TIS implementation. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-09 07:02:22 +00:00
F: drivers/tpm/
MAINTAINERS: assign include/tpm*, cmd/tpm* The files include/tpm* are an integral part of the TPM drivers. The tpm* commands are used to access TPM devices. Both should be managed by the TPM DRIVERS maintainer. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-04-02 04:51:01 +00:00
F: include/tpm*
MAINTAINERS: Add entry for TPM drivers TPM drivers have currently no maintainers. Add myself since I contributed the TIS implementation. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-09 07:02:22 +00:00
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
TQ GROUP
MAINTAINERS: Update no longer valid maintainers' status The following maintainers' email addresses are no longer valid. vipin.kumar@st.com martin.krause@tq-systems.de kim.phillips@freescale.com fgretief@spaceteq.co.za Update status of the components they used to maintain to be: S: Orphaned (Since 2016-02) Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2016-02-22 03:54:41 +00:00
#M: Martin Krause <martin.krause@tq-systems.de>
S: Orphaned (Since 2016-02)
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
T: git git://git.denx.de/u-boot-tq-group.git
Add UCLASS_TEE for Trusted Execution Environment Adds a uclass to interface with a TEE (Trusted Execution Environment). A TEE driver is a driver that interfaces with a trusted OS running in some secure environment, for example, TrustZone on ARM cpus, or a separate secure co-processor etc. The TEE subsystem can serve a TEE driver for a Global Platform compliant TEE, but it's not limited to only Global Platform TEEs. The over all design is based on the TEE subsystem in the Linux kernel, tailored for U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-09-25 14:40:09 +00:00
TEE
M: Jens Wiklander <jens.wiklander@linaro.org>
MAINTAINERS: add a new entry on TEE MAINTAINERS Since I do have a look on TEE patches regardless and Jens doesn't have his own tree, add myself as a co-maintainer. I'll be carrying over the TEE related patches from now on. While at it add the maintenance tree for TPM Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-01-19 15:10:57 +00:00
M: Ilias Apalodimas <ilias.apalodimas@linaro.org>
T: git https://source.denx.de/u-boot/custodians/u-boot-tpm.git
Add UCLASS_TEE for Trusted Execution Environment Adds a uclass to interface with a TEE (Trusted Execution Environment). A TEE driver is a driver that interfaces with a trusted OS running in some secure environment, for example, TrustZone on ARM cpus, or a separate secure co-processor etc. The TEE subsystem can serve a TEE driver for a Global Platform compliant TEE, but it's not limited to only Global Platform TEEs. The over all design is based on the TEE subsystem in the Linux kernel, tailored for U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-09-25 14:40:09 +00:00
S: Maintained
F: drivers/tee/
F: include/tee.h
tee: optee: support AVB trusted application Adds configuration option OPTEE_TA_AVB and a header file describing the interface to the Android Verified Boot 2.0 (AVB) trusted application provided by OP-TEE. Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-25 14:40:15 +00:00
F: include/tee/
Add UCLASS_TEE for Trusted Execution Environment Adds a uclass to interface with a TEE (Trusted Execution Environment). A TEE driver is a driver that interfaces with a trusted OS running in some secure environment, for example, TrustZone on ARM cpus, or a separate secure co-processor etc. The TEE subsystem can serve a TEE driver for a Global Platform compliant TEE, but it's not limited to only Global Platform TEEs. The over all design is based on the TEE subsystem in the Linux kernel, tailored for U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-09-25 14:40:09 +00:00
MAINTAINERS: Update lib/optee with my details Commit 32ce6179fb99 ("optee: Add lib entries for sharing OPTEE code across ports") adds code into lib/optee but neglects to update MAINTAINERS to make me buggable for questions and maintenance. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Suggested-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-05-04 00:08:26 +00:00
TEE-lib
M: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
S: Maintained
F: lib/optee
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
UBI
M: Kyungmin Park <kmpark@infradead.org>
MAINTAINERS: add me as a maintainer of UBI Add me for UBI custodian. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-11-18 08:08:45 +00:00
M: Heiko Schocher <hs@denx.de>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-ubi.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: drivers/mtd/ubi/
ufs: Add Initial Support for UFS subsystem Add Support for UFS Host Controller Interface (UFSHCI) for communicating with Universal Flash Storage (UFS) devices. The steps to initialize the host controller interface are the following: - Initiate the Host Controller Initialization process by writing to the Host controller enable register. - Configure the Host Controller base address registers by allocating a host memory space and related data structures. - Unipro link startup procedure - Check for connected device - Configure UFS host controller to process requests Also register this host controller as a SCSI host controller. Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported to U-boot. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-15 12:54:36 +00:00
UFS
MAINTAINERS: ufs: Change Bhupesh's email address Set my current personal email in the MAINTAINERS file. Signed-off-by: Bhupesh Sharma <bhupesh.linux@gmail.com>
2023-09-15 18:14:41 +00:00
M: Bhupesh Sharma <bhupesh.linux@gmail.com>
MAINTAINERS: Update UFS maintainer Dropping Faiz Abbas from the UFS maintainer list as his e-mail ID is no longer valid. Adding Bhupesh Sharma who has been using this framework working on Qualcomm Snapdragon SoCs as well as sending out fixes. Adding myself as well to support in reviewing and testing patches. Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Acked-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-08-17 12:09:14 +00:00
M: Neha Malcom Francis <n-francis@ti.com>
ufs: Add Initial Support for UFS subsystem Add Support for UFS Host Controller Interface (UFSHCI) for communicating with Universal Flash Storage (UFS) devices. The steps to initialize the host controller interface are the following: - Initiate the Host Controller Initialization process by writing to the Host controller enable register. - Configure the Host Controller base address registers by allocating a host memory space and related data structures. - Unipro link startup procedure - Check for connected device - Configure UFS host controller to process requests Also register this host controller as a SCSI host controller. Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported to U-boot. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-15 12:54:36 +00:00
S: Maintained
F: drivers/ufs/
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
USB
M: Marek Vasut <marex@denx.de>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-usb.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: drivers/usb/
MAINTAINERS: assign usb.c and and usb_kbd.c Marek is already maintaining USB. Assign files common/usb.c and common/usb_kbd.c to him. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-17 09:37:19 +00:00
F: common/usb.c
F: common/usb_kbd.c
MAINTAINERS: Move usb_storage from DFU to USB The usb_storage.c is the host-side USB mass storage device support, it is not the DFU/UMS gadget-side implementation. Fix the entry. Signed-off-by: Marek Vasut <marex@denx.de>
2022-11-04 11:28:07 +00:00
F: common/usb_storage.c
MAINTAINERS: Add usb.h entry to usb Add usb.h file into the USB list. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
2020-03-25 20:35:53 +00:00
F: include/usb.h
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
MAINTAINERS: Update maintainer for USB xHCI As discussed with Marek, this adds myself as the maintainer to offload the USB xHCI part. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-11-06 15:39:01 +00:00
USB xHCI
M: Bin Meng <bmeng.cn@gmail.com>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-usb.git topic-xhci
MAINTAINERS: Update maintainer for USB xHCI As discussed with Marek, this adds myself as the maintainer to offload the USB xHCI part. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-11-06 15:39:01 +00:00
F: drivers/usb/host/xhci*
usb: xhci: move xhci.h to include usb The xhci.h header file is currently located under drivers/usb/xhci Move it to the include/usb folder to make it available to drivers that are not under drivers/usb/xhci Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-09-11 09:33:46 +00:00
F: include/usb/xhci.h
MAINTAINERS: Update maintainer for USB xHCI As discussed with Marek, this adds myself as the maintainer to offload the USB xHCI part. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-11-06 15:39:01 +00:00
lib: uuid: introduce testcase for uuid_str_to_le_bin provide a test case Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2023-08-04 13:33:39 +00:00
UUID testing
M: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
S: Maintained
F: test/lib/uuid.c
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
VIDEO
M: Anatolij Gustschin <agust@denx.de>
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-video.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: drivers/video/
MAINTAINERS: assign include/video*.h The include/video*.h files are part of the drivers in drivers/video. So it makes sense to assign them to the same maintainer. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-19 18:16:32 +00:00
F: include/video*.h
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
MAINTAINERS: Add an entry for VirtIO This was missed when VirtIO support was initially brought to U-Boot back in 2018. Add an entry for it and list myself as the maintainer. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-29 09:40:08 +00:00
VirtIO
M: Bin Meng <bmeng.cn@gmail.com>
S: Maintained
F: drivers/virtio/
F: cmd/virtio.c
F: include/config/virtio/
F: include/config/virtio.h
F: include/config/cmd/virtio.h
F: include/virtio*.h
F: test/dm/virtio.c
F: doc/develop/driver-model/virtio.rst
MAINTAINERS: Add watchdog maintainers entry I've been handling "inofficially" the watchdog related patches for a few years now. Let's make this official and add a tree for it and also add myself here in the MAINTAINERS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Harald Seiler <hws@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-01-13 15:57:31 +00:00
WATCHDOG
M: Stefan Roese <sr@denx.de>
S: Maintained
T: git https://source.denx.de/u-boot/custodians/u-boot-watchdog.git
F: cmd/wdt.c
F: drivers/watchdog/
F: include/watchdog*.h
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
X86
M: Simon Glass <sjg@chromium.org>
MAINTAINERS: Update maintainer for x86 This adds myself as one of the x86 maintainers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-23 14:36:33 +00:00
M: Bin Meng <bmeng.cn@gmail.com>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/custodians/u-boot-x86.git
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: arch/x86/
cmd: add exception command The 'exception' command allows to test exception handling. This implementation supports ARM, x86, RISC-V and the following exceptions: * 'breakpoint' - prefetch abort exception (ARM 32bit only) * 'unaligned' - data abort exception (ARM only) * 'undefined' - undefined instruction exception Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-12-26 16:20:35 +00:00
F: cmd/x86/
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
MAINTAINERS: Add maintainers to XEN section Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-21 09:10:01 +00:00
XEN
MAINTAINERS: Update e-mail in Xen maintainership Changing e-mail because of leaving EPAM. Signed-off-by: Anastasiia Lukianenko <vicooodin@gmail.com> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2022-01-19 20:49:21 +00:00
M: Anastasiia Lukianenko <vicooodin@gmail.com>
MAINTAINERS: Add maintainers to XEN section Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-21 09:10:01 +00:00
M: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
S: Maintained
F: arch/arm/cpu/armv8/xen/
F: arch/arm/include/asm/xen.h
F: arch/arm/include/asm/xen/
F: cmd/pvblock.c
F: drivers/serial/serial_xen.c
F: drivers/xen/
F: include/pvblock.h
F: include/xen/
F: include/xen.h
F: lib/sscanf.c
F: test/lib/sscanf.c
xtensa: add support for the xtensa processor architecture [1/2] The Xtensa processor architecture is a configurable, extensible, and synthesizable 32-bit RISC processor core provided by Cadence. This is the first part of the basic architecture port with changes to common files. The 'arch/xtensa' directory, and boards and additional drivers will be in separate commits. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-10 15:36:43 +00:00
XTENSA
M: Max Filippov <jcmvbkbc@gmail.com>
S: Maintained
F: arch/xtensa/
cmd: xxd: add new command Add xxd command to print file content as hexdump to standard out Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Roger Knecht <rknecht@pm.me>
2022-09-03 13:15:04 +00:00
XXD
M: Roger Knecht <rknecht@pm.me>
S: Maintained
F: cmd/xxd.c
F: doc/usage/cmd/xxd.rst
F: test/py/tests/test_xxd/
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
THE REST
MAINTAINERS, git-mailrc: Update my email address Signed-off-by: Tom Rini <trini@konsulko.com>
2015-03-02 13:37:50 +00:00
M: Tom Rini <trini@konsulko.com>
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
L: u-boot@lists.denx.de
Q: http://patchwork.ozlabs.org/project/uboot/list/
S: Maintained
Correct U-Boot upstream repository The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24 12:19:04 +00:00
T: git https://source.denx.de/u-boot/u-boot.git
tools: add a generic config for native tools building The motivation for this is to allow distributions to distribute all possible tools in a generic way, avoiding the need of specific tools building for each machine. Especially on OpenEmbedded / Yocto Project ecosystem, it is very common each BSP to end providing their specific tools when they need to generate images for some SoC (e.g MX23 / MX28 in meta-freescale case). Using this, we can package the tools doing: $: make tools-only_defconfig $: make tools-only Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> [trini: Add MAINTAINERS entry for myself, add to .travis.yml, make U-Boot itself buildable to not trip up other frameworks] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-08 00:00:41 +00:00
F: configs/tools-only_defconfig
MAINTAINERS: add initial version MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-01 00:24:08 +00:00
F: *
F: */
Reference in New Issue Copy Permalink