Commit Graph

8956 Commits

Author SHA1 Message Date
Antonio Borneo ba4cc258d2 LICENSES: add the GPL-3.0 license for stand-alone code
The stand-alone application "contrib/itmdump.c" is released as
GPL-3.0-or-later.

Add GPL-3.0 license in the licenses list.
Copy in subfolder stand-alone the GPL-3.0 from
	https://www.gnu.org/licenses/gpl-3.0.txt
adding the header required by spdxcheck.py.

Change-Id: I238efc411e07ed6bc1eba23edbc91b3825c3d2c7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5968
Tested-by: jenkins
2021-04-11 20:52:04 +01:00
Antonio Borneo 659e2e9da9 LICENSES: move the GPL-2.0 license as required by checkpatch
The script spdxcheck.py (used by checkpatch.pl) searches for the
license files in a dedicated folder, split in the subfolders:
	"preferred", "dual", "deprecated", "exceptions".

Move the GPL-2.0 license from COPYING to the subfolder preferred,
adding the header required by spdxcheck.py.
The header is copied from equivalent file in the Linux kernel,
made by Thomas Gleixner <tglx@linutronix.de>.
Note: the license in COPYING matches exactly
	https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt

Add a minimalist COPYING in the top directory, as required by
automake, pointing to the files in LICENSES.

Change-Id: I1fd0abc57b554d74f0b00fabd6c8c822b2c4acb5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5967
Tested-by: jenkins
2021-04-11 20:51:57 +01:00
Tomas Vanek 01030fb893 drivers/cmsis-dap: tidy up buffer access
Each one of CMSIS-DAP command handlers was responsible for setting
HID report number, which in case of USB bulk transport was not used
at all. The command had to be filled with 1 byte offset whereas
the response was read without an offset.

Introduce 'command' and 'response' pointers into struct cmsis_dap.
Use them for filling the command and read the response respectively.
CMSIS-DAP command parameter are now at positions as documented in
https://arm-software.github.io/CMSIS_5/DAP/html/group__DAP__Commands__gr.html
Adjust buffer allocation for HID and USB bulk transports.

While on it, use h_u32_to_le() and h_u16_to_le() instead of per-byte
writes.

Change-Id: Ib0808d6826ba0e254c1007ace8b743405536332a
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/6120
Reviewed-by: Adrian M Negreanu <adrian.negreanu@nxp.com>
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-04-10 20:54:43 +01:00
Adrian Negreanu fed42ccfd3 cmsis-dap: don't update the packet size across backends.
The hidapi cmsis-dap backend is using a packet_size of
64+1: 64 is the bMaxPacketSize0 and 1 is the hid Report-Id.

In hidapi::hid_write(), the packet_size is decremented by 1 and
stored for the next transfer.
The packet_size is now valid bMaxPacketSize0=64,
so when hid_read() is called, libusb_bulk_transfer() finishes w/o timeout.

For the libusb bulk backend, the same packet_size of 64+1 is used,
but there's no hid_write() to decrement and store it for the next read.

So the next time a read is done, it will try to read 64+1 bytes.

Fix this by putting the packet logic within each backend.
Use calloc() to allocate the struct cmsis_dap to be on safer side.

Change-Id: I0c450adbc7674d5fcd8208dd23062d5cdd209efd
Signed-off-by: Adrian Negreanu <adrian.negreanu@nxp.com>
Reviewed-on: http://openocd.zylin.com/5920
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-04-10 20:51:30 +01:00
Antonio Borneo 68e50415a1 openocd: drop dependency from libusb0
Now that the old drivers have been converted to libusb1, there is
no need to keep the build dependency from libusb0.

Drop libusb0 from configure and makefiles, remove the libusb0
helper and remove libusb0 and libusb-compat from the README files.

Change-Id: Icc05be74ae5971ba6cbb67d39107c709a4d826e6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5993
Tested-by: jenkins
2021-04-05 23:25:34 +01:00
Antonio Borneo ef41652caf drivers/arm-jtag-ew: switch to libusb1
Convert the driver from libusb0 to libusb1.

Change-Id: Idef0b6cf10fab583bc8d13b3b4fadd5cc368c090
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5990
Tested-by: jenkins
2021-04-05 23:25:08 +01:00
Antonio Borneo 5c53e2cd41 drivers/usbprog: switch to libusb1
Convert the driver from libusb0 to libusb1.

Change-Id: I3f334f2d02515d612097955e714910a587169990
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5992
Tested-by: jenkins
2021-04-05 23:25:02 +01:00
Antonio Borneo bc7d36d886 udev rules: add missing Altera USB Blaster devices
All Altera USB Blaster devices require a dedicated line in the
udev rules, but some USB VID/PID present in interface and board
config file is missing in udev rules.

Add the missing Altera USB Blaster devices in udev rules.
While there, fix an incorrect pair VID/PID that are reported
swapped inside a comment.

Change-Id: I2d67e90b10db99ef2638405585859c1393456f65
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6102
Tested-by: jenkins
2021-04-05 23:24:49 +01:00
Antonio Borneo 5df8488902 udev rules: add missing ftdi USB VID/PID
All ftdi devices require a dedicated line in the udev rules, but
some USB VID/PID present in interface and board config file is
missing in udev rules.

Add the missing ftdi devices in udev rules.

Change-Id: I850a4a95a2d4bb63b3fd09be803be8c23c4d6b49
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6101
Tested-by: jenkins
2021-04-05 23:24:44 +01:00
Antonio Borneo 36ae487ed0 jimtcl: add temporary workaround for memory leak in jimtcl 0.80
The API Jim_CreateCommand() in latest version of jimtcl leaks the
memory allocated internally by jimtcl when it converts the string
command-name to a Jim_Obj.
The fix is already merged upstream and would be available in next
jimtcl 0.81, expected in ~6 months, hopefully before the next tag
for OpenOCD v0.12.0.
OpenOCD v0.11.0 is distributed with jimtcl 0.79.
Debian distributes jimtcl as a separate library package and today
it's still on 0.79.

It make sense to keep using jimtcl 0.80 in current development
cycle to test it further. But having this background memory leak
noise hides the eventual new memory leaks that could come from the
development activity.

This patch uses the internal jimtcl API Jim_CreateCommandObj() and
correctly free the internal object, avoiding the memory leak.
Being an internal API, it is not accessible if OpenOCD is linked
with an external jimtcl library. Nevertheless, building jimtcl as
a submodule of OpenOCD makes the trick effective.

The scope of this patch is thus limited at developers that build
OpenOCD with jimtcl submodule and need to control and debug memory
leaks.
This patch is supposed to be removed as soon as jimtcl 0.81 gets
available.

The added code is located, on purpose, in an area of the file that
hopefully will not conflict other patches pending in gerrit.

Change-Id: I4d300ad21bdb6c616c3f0f14b429b4fdf360900d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6130
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Jonathan McDowell <noodles-openocd@earth.li>
2021-04-05 23:24:30 +01:00
Raúl Sánchez Siles a5b5907506 build: Fix out-of-tree with --disable-dependency-tracking configure flag
After bootstrapping build, if we want to do an out-of-tree build (ie: in the
OOT-build dir) we have a build failure because build system relies on
the OOT-build/src directory exists

```sh
./bootstrap
mkdir OOT-build
cd OOT-build
../configure --disable-dependency-tracking --<flag1> --<flag2> ...
make
$ LANG=C make
cat ../src/helper/startup.tcl ../src/jtag/startup.tcl ../src/target/startup.tcl ../src/server/startup.tcl ../src/flash/startup.tcl | ../src/helper/bin2char.sh > src/startup_tcl.inc || { rm -f src/startup_tcl.inc; false; }
/bin/bash: line 1: src/startup_tcl.inc: No such file or directory
make: *** [Makefile:6603: src/startup_tcl.inc] Error 1
```

These kind of errors are fixed indicating relevant directory creation in
Makefile.am before actually relying on it.

Change-Id: I8185fd41ef942184597dc4c0092796034572cbe1
Signed-off-by: Raúl Sánchez Siles <rasasi78@gmail.com>
Reviewed-on: http://openocd.zylin.com/6106
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-04-05 23:24:14 +01:00
Tarek BOCHKATI 6405d35f32 flash/stm32l4x: probe tzen and rdp values
introduction of 'enum stm32l4_rdp' enumerating possible RDP levels for
devices with and without TrustZone.

also in 'stm32l4_flash_bank' structure we added and rdp and tzen members
to store read values by the helper 'stm32l4_sync_rdp_tzen'

these new members are used to display security and protection status
while probing the flash.

Change-Id: Icf883189715278a3323fe210d295047678b16592
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5541
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-24 17:18:29 +00:00
Tarek BOCHKATI 88fa831839 flash/stm32l4x: introduce stm32l4_part_info.flags for devices features
instead of adding a new member into stm32l4_part_info for every relevant
feature, .flags serves as container for the devices' features.

identified features: F_HAS_DUAL_BANK, F_USE_ALL_WRPXX, F_HAS_TZ

Change-Id: I3093e54c6509dec33043ebe6f87675198bf1967a
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5540
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-24 17:18:11 +00:00
Tarek BOCHKATI 03e2bc0f3b flash/stm32l4x: enhance protect handler to use efficiently all WRP areas
stm32l4_protect: was using one WRP area per bank, without checking
if it is already protecting some sectors.
protection algo is more complicated than that, before using a WRP area
we should check if it is already used, then either reuse it for extension
(or reduction) or use a free area.

introduce a new command: stm32l4x wrp_info bank_num ['bank1'|'bank2']
this command lists the protected areas using WRP.

Note: for some devices like STM32L4R/S in single bank mode, all 4 WRP areas
are usable for that bank, to manage this case an attribute 'use_all_wrpxx'
was introduced into stm32l4_part_info and used later in protection handlers

example usage:
	$ telnet localhost 4444
	> flash probe 0
	  device idcode = 0x10036470 (STM32L4R/L4Sxx - Rev: Y)
	  flash size = 2048kbytes
	  flash mode : dual-bank
	  flash 'stm32l4x' found at 0x08000000
	> stm32l4x wrp_info 0
	  no protected areas
	> flash protect 0 0 4 on
	  set protection for sectors 0 through 4 on flash bank 0
	> flash protect 0 8 9 on
	  set protection for sectors 8 through 9 on flash bank 0
	> stm32l4x wrp_info 0
	  protected areas: [0,4][8,9]
	> flash protect 0 6 6 on
	  the device WRPxy are not enough to set the requested protection
	  failed setting protection for blocks 6 to 6
	> flash protect 0 3 5 on
	  set protection for sectors 3 through 5 on flash bank 0
	> stm32l4x wrp_info 0
	  protected areas: [0,5][8,9]
	> flash protect 0 6 7 on
	  set protection for sectors 6 through 7 on flash bank 0
	> stm32l4x wrp_info 0
	  protected areas: [0,9]
	> flash protect 0 5 6 off
	  cleared protection for sectors 5 through 6 on flash bank 0
	> stm32l4x wrp_info 0
	  protected areas: [0,4][7,9]

Change-Id: I42bd84fa66edd93406e18c6d89310faa5267ffa7
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6107
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-24 17:18:04 +00:00
Tarek BOCHKATI b8fd9aecb1 stm32l4x: add OTP support for STM32 G0/G4/L4/L4+/L5/WB/WL devices
this is a rework of #5320 started by Andreas then abandoned.

same syntax as in stm32f2x driver:

  enable OTP for writing
  > stm32l4x otp 1 enable

  write to OTP
  > flash write_bank 1 foo.bin 0
  > flash filld 0x1FFF7000 0xDeadBeafBaadF00d 1

  read OTP
  > mdw 0x1FFF7000 4

  disable OTP
  > stm32l4x otp 1 disable

Change-Id: Id7d7c163b35d7a3f406dc200d7e2fc293b0675c2
Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com>
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5537
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-24 17:15:38 +00:00
Tomas Vanek f13bb10e26 flash/nor/atsame5: add SAME51G18A and SAME51G19A devices
Change-Id: Icbb49c76594152e9c5da1c7465675de26c86540e
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reported-by: mikewolak@users.sourceforge.net
Fixes: https://sourceforge.net/p/openocd/tickets/288/
Reviewed-on: http://openocd.zylin.com/5984
Tested-by: jenkins
2021-03-24 17:14:56 +00:00
Mischa Studer b588977633 flash/nor/cfi: fix uninitialized write-mem pointer
In flash/nor/cfi.c:835 struct cfi_info is allocated by malloc(). As
write-mem was uninitialized the pointer pointed to an out of range
address, which led to a segmentation fault and crashed openocd.
This happened during flash-command of an external flash-bank, using
cfi.
Use calloc() instead.
While on it check for NULL return and remove unnecessary initialzation.

Change-Id: I0e2ffb90559afe7f090837023428dcc06b2e29f6
Signed-off-by: Mischa Studer <mischa.studer@csa.ch>
Reviewed-on: http://openocd.zylin.com/6070
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-24 17:14:22 +00:00
Andrew Wesie 6448f70e09 tcl/interface/ftdi: Add PLS SPC5 debugger config
Change-Id: I694201db0811beebc94e87822c87fbfc6aecc4c4
Signed-off-by: Andrew Wesie <awesie@gmail.com>
Reviewed-on: http://openocd.zylin.com/6081
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-20 17:42:06 +00:00
Antonio Borneo e15c2e8a8c README: update requested autoconf version 2.69
Commit 4c00f96fc2 ("configure.ac: switch to autoconf 2.69")
changes the required minor version of autoconf.

Update the README file accordingly.

Change-Id: I98b32b888ff531300f03c4ef9ebcbf8110509e52
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6114
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>
2021-03-19 22:02:11 +00:00
Oleksij Rempel f09aa77c0c drivers: USB Blaster II: close file and release USB device if firmware handling failed
In case of some error, the USB device and firmware file are still
claimed. Make sure refcounting is properly accounted for both cases.

Change-Id: I933114f68e59280e58372c0941a0062fe96ab340
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/6115
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-19 22:01:54 +00:00
Oleksij Rempel 08c7b904c3 drivers: USB Blaster II: claim interface before using it
If not, multiple instances of OOCD can concurrently use it.

Change-Id: I48cc9d90521d1dcc7720c6e8bec74f45972d16f7
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4589
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-19 22:01:23 +00:00
Evgeniy Didin eca4f964b4 target/arc: refactor ARC register numbers defines
For Zephyr rtos support it is necessary to define general register
numbers for architecture. There were some already in arc.h file.
Let's define ARC registers numbers as a set instead of separate defines.

Change-Id: I63742b8608f9556c2ec9bd2661a0fd9cf88e9b74
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Reviewed-on: http://openocd.zylin.com/6105
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-19 22:01:00 +00:00
Rene Kita 6db49eb885 build: remove warnings with gcc 11
This removes some warnings which prevent a successful build with -Werror
which is enabled by default. I'm using gcc 11, so maybe others are not
getting this warnings yet.

In src/flash/nor/numicro.c the debug messages were misleadingly indented.
In src/target/arm920t.c the array size where smaller than expected from
the receiving function.

Change-Id: I66f5c6a63beb9f9416e73b726299297476c884d8
Signed-off-by: Rene Kita <git@rkta.de>
Reviewed-on: http://openocd.zylin.com/6104
Reviewed-by: Jonathan McDowell <noodles-openocd@earth.li>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-19 22:00:34 +00:00
Tarek BOCHKATI 84af95bb54 aarch64: handle semihosting in aarch32 state
Change-Id: I0e868d617db126a2b258e27b11979b75b5bb72f5
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5860
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-19 21:59:48 +00:00
Andrew Wesie 7bc687ade5 tcl/interface/ftdi: Add miniWiggler debugger config
Change-Id: I91f73a377cd9525008d09fda7a7c58d498014b74
Signed-off-by: Andrew Wesie <awesie@gmail.com>
Reviewed-on: http://openocd.zylin.com/6111
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-03-19 21:59:24 +00:00
Tarek BOCHKATI 78462af05f telnet: support end and home keys
this will help navigate to the line start and end easily

Change-Id: I3f42eb5267df64c59a85ece67de5fce39a8843ec
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6094
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-03-19 21:58:59 +00:00
Tim Newsome 41147e6fcd Implement CRC32 algorithm for RISC-V.
Signed-off-by: Tim Newsome <tim@sifive.com>
Change-Id: Id437f78e74e3d837ff203f84c4eeb996bfad9a01
Reviewed-on: http://openocd.zylin.com/6076
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Marc Schink <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-03-19 21:58:17 +00:00
Christian Hoff 6c0151623c aarch64: add support for "reset halt"
Support halting the CPU directly after a reset. If halt is
requested, the CPU stops directly at the reset vector, before
any code is executed.

This functionality was implemented using the Reset Catch
debug event.

Change-Id: If90d54c088442340376f0b588ba10267ea8e7327
Signed-off-by: Christian Hoff <christian.hoff@advantest.com>
Reviewed-on: http://openocd.zylin.com/5947
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-03-19 21:57:43 +00:00
Antonio Borneo 25218e8935 jtag: remove minidriver code and minidriver-dummy
With zy1000 removed, there is no other implementation that uses
the minidriver, apart from the test/example minidriver-dummy.
While the idea of the minidriver is probably still valid (that is
to intercept jtag primitives before serialization), there is no
current use case, no guarantee it is really working, and the way
it was implemented (by macros and #if conditionals) is really hard
to maintain and test.

Let's let it rip in git history, from where it could eventually be
taken back in a more modern implementation.
The entry points of minidriver API are still in the code with the
original names.

Change-Id: I882e32cb26cf5842f9cba14e3badaf8948e3760d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6091
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-19 21:56:06 +00:00
Antonio Borneo b0fe92dba7 zy1000: drop the code, deprecated in v0.10.0
The code for zy1000 has been marked as deprecated in release
v0.10.0, 4 years ago.

Time to drop it!

Change-Id: I08fca2a2bf8f616f031e15fd37dac3197a40ba50
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6090
Tested-by: jenkins
2021-03-19 21:55:50 +00:00
Antonio Borneo 58b95eac48 ioutil: drop the code, deprecated in v0.10.0
The code for ioutil has been marked as deprecated in release
v0.10.0, 4 years ago.

Time to drop it!

Change-Id: I36dce1669ebe9acada5f9e752835c53e5214e3be
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6089
Tested-by: jenkins
2021-03-19 21:55:23 +00:00
Antonio Borneo 26a57b06cf oocd_trace: drop the code, deprecated in v0.10.0
The code for oocd_trace has been marked as deprecated in release
v0.10.0, 4 years ago.

Time to drop it!

Change-Id: I989f8345dee4ff2369bcf5e2e2ace86bbd5aa6a5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6088
Tested-by: jenkins
2021-03-19 21:55:15 +00:00
Antonio Borneo 113f949ac1 target: remove handling of target's deprecated_name
We do not have anymore any deprecated target name.
Drop the code to handle deprecated target names and the placehold
in struct target_type.

This patch is separated from the patch that drops the remaining
deprecated target names to be ready to revert this if there is any
need in the future.

Change-Id: I96fca7ffa39d8292f81e79f115ea45c4a30035d7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6087
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-19 21:55:02 +00:00
Antonio Borneo 64b486e74f target: remove target names already deprecated in v0.8.0
Some target name were marked as deprecated in release v0.7.0 and
v0.8.0, almost 7 years ago, and replaced with more 'actual' names.
We can reasonably expect that in these 7 years any user of OpenOCD
has already migrated to v0.8.0 or to some newer release, thus has
already updated any local/personal script to get rid of the
deprecated message.

Drop the target names already deprecated in v0.8.0.

Change-Id: I7c7491496db1b302b4eb1e9fc6090b58d4acf05a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6086
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-19 21:54:57 +00:00
Antonio Borneo 70ead8ff5d startup.tcl: remove commands already deprecated in v0.7.0
Some command were already marked as deprecated in release v0.7.0,
more then 7 years ago, and for some of them the depredation date
is even earlier.
We can reasonably expect that in these 7 years any user of OpenOCD
has already migrated to v0.7.0 or to some following intermediate
build, thus has already updated any local/personal script to get
rid of the deprecated message.

Drop the commands already deprecated in v0.7.0.

Change-Id: I81cdc415ab855ebf30980ef5199f9780c5d7f932
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6085
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-19 21:54:51 +00:00
Antonio Borneo d02e29daba openocd: remove command line flag -p/--pipe deprecated in v0.5.0
The OpenOCD command line flag -p/--pipe was marked as deprecated
in release v0.5.0, more than 9 years ago.
We can reasonably expect that in these 9 years any user of OpenOCD
has already migrated to v0.5.0 or to some newer release, thus has
already updated any local/personal script to get rid of the
deprecated message.

Drop the command line flag already deprecated in v0.5.0.

Change-Id: I2faeb592ed2c2f67c2d3227f118093e39fcf4a8c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6084
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-19 21:54:46 +00:00
Antonio Borneo cda7bc9a4c target/arm920t: remove command 'arm920t cp15i' deprecated in v0.4.0
The command 'arm920t cp15i' was marked as deprecated in release
v0.4.0, almost 11 years ago.
We can reasonably expect that in these years any user of OpenOCD
has already migrated to v0.4.0 or to some newer release, thus has
already updated any local/personal script.
There is no run-time warning about the deprecation, but it is
reported in the help and in the documentation.

Drop the command already deprecated in v0.4.0.

Change-Id: I755c4283e13e125558fcd73b15fe20498eae95ca
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6083
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-19 21:54:41 +00:00
Antonio Borneo ab0def0f38 target/arm720t: remove command 'arm720t cp15' deprecated in v0.4.0
The command 'arm720t cp15' was marked as deprecated in release
v0.4.0, almost 11 years ago.
We can reasonably expect that in these years any user of OpenOCD
has already migrated to v0.4.0 or to some newer release, thus has
already updated any local/personal script.
There is no run-time warning about the deprecation, but it is
reported in the help and in the documentation.

Drop the command already deprecated in v0.4.0.

Change-Id: I2b325d0312d96ca5e5f0f1bad13bb162b3b75c52
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6082
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-19 21:54:32 +00:00
Raúl Sanchez Siles 8d6f7c9223 flash/stm32l4x: zero init stm32l4_flash_bank struct on flash bank initialization
This is specially needed when, in the probe routine, device is not
found among the stm32l4_parts. In this case, the stm32l4_flash_bank->part_info
is undefined and inadvertentanly used afterwards:
part_info = stm32l4_info->part_info;

If the stm32l4_flash_bank is zero init, the probe routine checks for
the validity of the part_info field in the previous struct and correctly
detects the unsupported (or not found) condition, raising an error
rather than a SIGSEGV

Change-Id: I7d9d669fb3fa7f8f0903acd60046966b4acb0031
Signed-off-by: Raúl Sánchez Siles <rasasi78@gmail.com>
Reviewed-on: http://openocd.zylin.com/6103
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-16 08:51:37 +00:00
Antonio Borneo 4c00f96fc2 configure.ac: switch to autoconf 2.69
OpenOCD file configure.ac requires autoconf equal or newer then
2.64, which is quite old.
These are the release dates so far:
- autoconf-2.64 2009-07-26
- autoconf-2.65 2009-11-21
- autoconf-2.66 2010-07-02
- autoconf-2.67 2010-08-02
- autoconf-2.68 2010-09-22
- autoconf-2.69 2012-04-24
- autoconf-2.70 2020-12-08

Switch to autoconf 2.69, which is old enough to be the standard in
current systems.
This should reduce the effort on configure.ac compatibility.

Change-Id: Ia7c78d2fa34c50ed5ccf4fb66ad3484369cf3b4a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6008
Tested-by: jenkins
2021-03-10 21:47:48 +00:00
Antonio Borneo 266a945ad3 jimtcl: update to version 0.80 (2020-10-29)
Update jimtcl to version 0.80.
Add a workaround in Makefile.am to allow 'make distcheck' with the
new jimtcl. A fix is already merged upstream but will be part of
the future release 0.81 of jimtcl.

Change-Id: I1cebfb9c17179114960dc771e0b31836b4b9b058
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5949
Tested-by: jenkins
2021-03-10 21:37:27 +00:00
Tarek BOCHKATI 06990a1a9e tcl/target: add BCM2711 configuration file
The Broadcom BCM2711 used in Raspberry Pi 4
No documentation was found on Broadcom website
Partial information is available in raspberry pi website:
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711/

Change-Id: I3db6c9af520af8ab4c21ad35ff0f2db28efc0325
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6066
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10 21:36:59 +00:00
Tarek BOCHKATI 77e1841f64 tcl/target: add BCM2837 configuration file
This is the Broadcom chip used in the Raspberry Pi 3,
and in later models of the Raspberry Pi 2.

Partial information is available in raspberry pi website:
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837b0

Change-Id: I1188a7866304c59f670a543809aca3927174786e
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6069
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10 21:36:54 +00:00
Tarek BOCHKATI f9b5e34e39 tcl/target: add BCM2836 configuration file
The Broadcom chip used in the Raspberry Pi 2 Model B

Partial information is available in raspberry pi website:
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2836

Change-Id: I50b040db213c5b72f63d5f5534c552426c7376f9
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6068
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10 21:36:50 +00:00
Tarek BOCHKATI a909df7088 tcl/target: add BCM2835 configuration file
This is the Broadcom chip used in the Raspberry Pi Model A, B, B+,
the Compute Module, and the Raspberry Pi Zero.

Partial information is available in raspberry pi website:
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2835

Change-Id: Ifeb012952473d624327e8c010ac5c886d9473aa0
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6067
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10 21:36:45 +00:00
Marc Schink 210b7d2d16 flash/nor/stmqspi: Replace macros with static inline functions
There is no good reason to use macros instead of static inline functions. The
current code is hard maintain. For example, it changes variables outside of the
macro scope. Also, it is conflicting with the C coding style.

Change-Id: I5ac9d2ae076ef73c176d4e32b2e7e0a99fa875ab
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6046
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10 21:36:20 +00:00
Antonio Borneo 8132b77d61 stlink: swo: use completely the available buffer
The buffer passed to stlink_usb_trace_read() is allocated of size
*size and does not need to be zero-terminated. There is no reason
to not fill its last byte.

When checking the bytes available on swo, limit the retrieved byte
length to *size.

Change-Id: Iade0f8963118695931f13a8a3f1ab204911236b6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Adrian Negreanu <adrian.negreanu@nxp.com>
Reviewed-on: http://openocd.zylin.com/6061
Tested-by: jenkins
Reviewed-by: Adrian M Negreanu <adrian.negreanu@nxp.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-03-10 21:36:01 +00:00
Antonio Borneo a256943838 jtag/nulink: add a space after PRIx32
Missing the space cause the hex value to be printed together with
the following field.

Add a space after PRIx32.

Change-Id: I95824a9a8b8c0ad911d6c31f732d926cb3e0c068
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6060
Tested-by: jenkins
Reviewed-by: Jonathan McDowell <noodles-openocd@earth.li>
2021-03-10 21:35:46 +00:00
Tarek BOCHKATI bc0c9907d6 cortex_m: avoid reading and writing non-existent registers
Change-Id: Iedc24352c8d3444372da06d00fcec9603540f950
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6059
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10 21:35:31 +00:00
Felipe Balbi 5e57090203 Add configuration file for Olimex H405
Change-Id: I34a030f65ebe041408655ea9792346b146bd1092
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Reviewed-on: http://openocd.zylin.com/6049
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10 21:34:32 +00:00