Commit Graph

609 Commits

Author SHA1 Message Date
Andreas Färber 0c8ec7c826 Fix spelling of ARM Cortex
It's Cortex-Xn, not Cortex Xn or cortex xn or cortex-xn or CORTEX-Xn
or CortexXn. Further it's Cortex-M0+, not M0plus.

Cf. http://www.arm.com/products/processors/index.php

Consistently write it the official way, so that it stops propagating.
Originally spotted in the documentation, it mainly affects code comments
but also Atmel SAM3/SAM4/SAMV, NiietCM4 and SiM3x flash driver output.

Found via:

  git grep -i "Cortex "
  git grep -i "Cortex-" | grep -v "Cortex-" | grep -v ".cpu"
  git grep -i "CortexM"

Change-Id: Ic7b6ca85253e027f6f0f751c628d1a2a391fe914
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3483
Tested-by: jenkins
Reviewed-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-20 21:38:03 +01:00
Andreas Färber 56a889f4d4 doc: Fix mismerges of fm4, kinetis and kinetis_ke flash drivers
Commit dfc6658cf9 ("Kinetis: flash
driver described in openocd.texi") inserted a kinetis section between
fm3 and lpc2000. Then commit 43ff5acd45
("flash: New Spansion FM4 flash driver") was merged, inserting the fm4
section between kinetis and lpc2000, instead of after fm3. Finally
kinetis_ke was added between kinetis and fm4 in commit
5396ec5dcc ("flash: Added support for
Freescale Kinetis KE family.").

Restore the alphabetical order by moving the fm4 section to before
kinetis.

Change-Id: I77e47c3cd5b2cd8570b62ff2f7be8526aaf57ad0
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3484
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Marc Schink <openocd-dev@marcschink.de>
2016-05-16 21:30:55 +01:00
Rick Foos 060e9c3b36 flash/nor: Add Ambiq Micro Apollo flash driver.
Initial release of Ambiq Micro Apollo flash driver
supporting our sub-threshold (low power) Cortex M4F part,
and Evaluation Kit.

We have been shipping openocd to our customers for about one year.

The EVK boards are SWD only using ftdi. We also use two of the
other COM instances to display debug information.

It takes about 15 seconds to flash 512K, and mass erase is
about 5 seconds.

Tested by internal verification group, FAE's, and customer sites.

Merged commit 'refs/changes/17/3417/1' as suggested. Makefile.am
and drivers.c follow the new format to avoid conflicts.

Removed unused fault_capture command.

Added documentation for flash driver.

Change-Id: Iae92d869369c6827244f0071f9cb522d8d91fed8
Signed-off-by: Rick Foos <rfoos@solengtech.com>
Reviewed-on: http://openocd.zylin.com/3230
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-14 12:18:31 +01:00
Lieven Hollevoet 241a92d0f2 Support for debug interface lock of EFM32 controllers
The capability to lock the debug interface on EFM32
controllers was lacking in OpenOCD.
After receiving some pointers by zapb_ and PaulFertser
on IRC (thanks guys!) I have added this capability.

This works by writing the required bits in the debug
lock word to '0'.

Note: there is currently no way to re-enable the debug
interface from OpenOCD as doing this requires specific
pin wiggling that is currently not implemented yet.

However: having the capability to lock the debug interface
is useful when building a volume programming jig.
You can flash the program code, verify and then
lock the debug interface so that the device cannot
be read when it is deployed in the field.

Change-Id: If2d562dfdb4b95519785a4395f755d9ae3d0cf12
Signed-off-by: Lieven Hollevoet <hollie@lika.be>
Reviewed-on: http://openocd.zylin.com/3389
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-05 22:55:56 +01:00
Matthias Welwarsky 414e4eb40e ftdi: make ftdi_location command depend on libusb1 version
The function libusb_get_port_numbers(), required for the command
ftdi_location, is only available in recent version of libusb1.
Compilation will break if the function is not available. This patch
enables the command only if libusb1 contains the necessary function.

Change-Id: I091e72dafa4ed22eea51692751d43246a8152987
Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com>
Reviewed-on: http://openocd.zylin.com/3396
Tested-by: jenkins
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-05 22:33:41 +01:00
Andreas Färber 44d2c7b416 flash/nor: Add Infineon XMC1000 flash driver
The XMC1000 family uses a very different flash interface from XMC4000.

Tested on XMC 2Go and XMC1100 Boot Kit.

Change-Id: I3edaed420ef1c0fb89fdf221022c8b04163d41b3
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3418
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
2016-05-05 07:50:59 +01:00
Ivan Meleca 5396ec5dcc flash: Added support for Freescale Kinetis KE family.
Tested with MKE04Z8VTG4, MKE02Z64VLC4 and MKE02Z64VLD2.

Change-Id: I606e32a2746a3b96d3e50f3656ba78d40c41c1ea
Signed-off-by: Ivan Meleca <ivan@artekit.eu>
Reviewed-on: http://openocd.zylin.com/3380
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-05-04 22:32:23 +01:00
Matthias Welwarsky 0a97b232b1 ftdi: allow selecting device by usb bus location
This patch adds a 'ftdi_location' command to select an adapter by usb
bus number and port path.

This is helpful if you have a rack full of adapters in a testing or
manufacturing setup where the only constant is the physical usb bus
location of the adapter you want to address. Vid:Pid are not unique,
serial number _may_ be unique (and maybe not with embedded adapters) but
will change when a new target is plugged.

Specifying a location allows to understand instantly which board failed
bringup or testing.

Change-Id: I403c7c6c8e34fe42041b3f967db80f3160a4f1a3
Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com>
Reviewed-on: http://openocd.zylin.com/3351
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-03-24 08:52:14 +00:00
Andreas Färber f0682623ca fm4: Add support for S6E2DH family
Add support for S6E2DH MainFlash. VFlash is not implemented.

Briefly tested with SK-FM4-176L-S6E2DH V110 board.

Change-Id: If7c523d8c75307bc1494bbf4cca3eed0272e8e01
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3158
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29 20:15:52 +00:00
Andreas Färber f2b3a8b0e8 fm4: Add support for MB9BFx64/x65
These appear to be just additional flash size configurations.
Entirely based on manual, untested.

Change-Id: I4460dc1a588335df8fc0a385d24513a4e35b6951
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3157
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29 20:15:41 +00:00
Andreas Färber 43ff5acd45 flash: New Spansion FM4 flash driver
The Spansion FM4 family of microcontrollers does not offer a way to
identify the chip model nor the flash size, except for Dual Flash vs.
regular layout. Therefore the family is passed as argument and
wildcard-matched - MB9BFx6x and S6E2CC families are supported.

Iterations showed that ...
1) Just doing the flash command sequence from SRAM loader code for each
half-word took 20 minutes for an 8 KB block.
2) Doing the busy-wait in the loader merely reduced the time to 19 minutes.
3) Significant performance gains were achieved by looping in loader code
rather than in OpenOCD and by maximizing the batch size across sectors,
getting us down to ~2 seconds for 8 KB and ~2.5 minutes for 1.1 MB.
(Tested with SK-FM4-176L-S6E2CC-ETH v11, CMSIS-DAP v23.)

gcc, objcopy -Obinary and bin2char.sh are used for automating the
integration of hand-written assembler snippets.

Change-Id: I092c81074662534f50b71b91d54eb8e0098fec76
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2190
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29 19:40:20 +00:00
Tomas Vanek dfc6658cf9 Kinetis: flash driver described in openocd.texi
Change-Id: Id3410fc94f73191e3d7810115676046e5c760a0b
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3014
Tested-by: jenkins
2016-02-15 19:47:00 +00:00
Esben Haabendal 32b67ee3c9 cfi: support for 16-bit flash with reversed endianness
This is for targets where flash controller has reverse endianness
compared to target.  For these, the 'bus_swap' parameter can be given to the
CFI driver, which will cause command CFI commands to be written with
bytes swapped.  This is only for x16 CFI flash.

Change-Id: I698b768e92e65d160232e90b0e81a824e3c81a46
Signed-off-by: Esben Haabendal <esben@haabendal.dk>
Reviewed-on: http://openocd.zylin.com/3041
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-13 23:09:40 +00:00
Matthias Welwarsky e026d3ff1b jtag ftdi: sample TDO on falling edge of TCK
Due to signal propagation delays, sampling TDO on rising TCK can become
quite peculiar at fast TCK rates. However, FTDI chips offer a possiblity
to sample TDO on falling edge. With this change, stable operation can be
achieved at 30MHz clock even over 10cm ribbon cable.

Change-Id: Icaf240535dae15512e3c60a944e22a5fbc1b0b06
Signed-off-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-on: http://openocd.zylin.com/3180
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-02-13 23:04:49 +00:00
Matthias Welwarsky 5bee7f5b2c cortex_a: add 'dacrfixup' to cortex-a command group
work around issues with software breakpoints when the text segment
is mapped read-only by the OS. Set DACR to "all-manager" to bypass
TLB permission checks on memory access.

Change-Id: I79fd9b32b04a4d538d489896470ee30b26b72b30
Signed-off-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-on: http://openocd.zylin.com/3107
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-12-29 21:43:45 +00:00
Marc Schink 442f1540d5 Improve J-Link driver and introduce libjaylink.
This patch uses libjaylink which is a library to access J-Link
devices. As other tools which are not in the scope of OpenOCD also
need to access J-Link devices a library is used. A firmware upgrade
tool and an advanced configuration tool for J-Link devices are under
development.

Further versions of libjaylink will support additional features
OpenOCD could benefit from. This includes TCP/IP as additional
possibility to connect to J-Link devices as well as power tracing and
device internal communication. The latter is used to access
peripherals on some development boards (e.g EFM32 STK and DVK).

Integration of libjaylink is realized with a git submodule like
jimtcl. As libjaylink depends on libusb-1.0 only, no additional
dependency is introduced for OpenOCD.

All low-level JTAG and SWD implementations of the current driver are
left untouched and therefore no incompabilities are to be expected.

Improvements of this patch:

 * Support for more USB Product IDs, including those with the new
   scheme (0x10xx). The corresponding udev rules are also updated.
 * Device selection with serial number and USB address.
 * Adaptive clocking is now correctly implemented and only usable for
   devices with the corresponding capability.
 * The target power supply can now be switched without the need for
   changing configuration and power cycling the device.
 * Device configuration is more restrictive and only allowed if the
   required capabilities are available.
 * Device configuration now shows the changes between the current
   configuration of the device and the values that will be applied.
 * Device configuration is verified after it is written to the device
   exactly as the vendor software does.
 * Connection registration is now handled properly and checks if the
   maximum number of connections on a device is reached. This is also
   necessary for devices which are attached via USB to OpenOCD as
   some device models also support connections on TCP/IP.
 * Serial Wire Output (SWO) can now be captured. This feature is not
   documented by SEGGER however it is completely supported by
   libjaylink.

This patch and libjaylink were tested on Ubuntu 14.04 (i386),
Debian 7 (amd64), FreeBSD 10.0 (amd64) and Windows XP SP3 (32-bit)
with the following device and target configurations:

 * JTAG: J-Link v8.0, v9.0 and v9.3 with AT91SAM7S256
 * SWD: SiLabs EFM32 STK 3700 (EFM32GG990F1024)
 * SWD: J-Link v8.0, v9.0 and v9.3 with EFM32GG990F1024
 * SWD: XMC 2Go (XMC1100)
 * SWD: XMC1100 Boot Kit (XMC1100)
 * SWD: IAR Systems / Olimex Eval Board (LPC1343F)
 * SWD: Nordic Semiconductor nRF51 Dongle (nRF51422)
 * SWD: SiLabs EZR32 WSTK 6220A (EZR32WG330FG60G)

Except for Windows XP all builds are tested with Clang in addition to
GCC. This patch and libjaylink are not tested on OSX yet.

Change-Id: I8476c57d37c6091c4b892b183da682c548ca1786
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/2598
Tested-by: jenkins
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-26 12:19:22 +00:00
Bogdan Kolbov ae2142d5a2 niietcm4: support for NIIET's Cortex-M4 microcontrollers
This adds docs, example config, flash driver.
Driver is only supports K1921VK01T model for now.

Change-Id: I135259bb055dd2df1a17de99f066e2b24eae1b0f
Signed-off-by: Bogdan Kolbov <kolbov@niiet.ru>
Reviewed-on: http://openocd.zylin.com/3011
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-26 12:17:25 +00:00
Tomas Vanek 751e2454bf at91samd: handle reset run/halt in DSU
Atmel introduced a "Device Service Unit" (DSU) that holds the CPU
in reset if TCK is low when srst (RESET_N) is deasserted.
Function is similar to SMAP in ATSAM4L, see http://openocd.zylin.com/2604

Atmel's EDBG adapter handles DSU reset correctly without this change.

An ordinary SWD adapter leaves TCK in its default state, low.
So without this change any use of sysresetreq or srst
locks the chip in reset state until power is cycled.

A new function dsu_reset_deassert is called as reset-deassert-post event handler.
It optionally prepares reset vector catch and DSU reset is released then.

Additionally SWD clock comment is fixed in at91samdXX.cfg and clock is
lowered a bit to ensure a margin for RC oscillator frequency deviation.
adapter_nsrst_delay 100 is commented out because is no more necessary after
http://openocd.zylin.com/2601

Change-Id: I42e99b1b245f766616c0a0d939f60612c29bd16c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/2778
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-11-20 18:26:05 +00:00
Jeff Ciesielski 33b048d456 flash: New driver for XMC4xxx microcontroller family
This is a complete flash driver for the Infineon XMC4xxx family of
microcontrollers, based on the TMS570 driver by Andrey Yurovsky.
The driver attempts to discover the particular variant of MCU via a
combination of the SCU register (to determine if this is indeed an
XMC4xxx part) and the FLASH0_ID register (to determine the variant).
If this fails, the driver will not load.
The driver has been added to the README and documentation.

Tests:
* Hardware: XMC4500 (XMC4500_relax), XMC4200 (XMC4200 enterprise)
* SWD + JTAG
* Binary: 144k, 1M

Note:
* Flash protect only partly tested. These parts only allow the flash
  protection registers (UCB) to be written 4 times total, and my devkits
  have run out of uses (more on the way)

Future Work:
* User 1/2(permalock) locking support via custom command
* In-memory flash loader bootstrap (flashing is rather slow...)

Change-Id: I1d3345d5255d8de8dc4175cf987eb4a037a8cf7f
Signed-off-by: Jeff Ciesielski <jeffciesielski@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2488
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-11-11 12:08:35 +00:00
Morgan Quigley 42c24acebd flash: driver for Atmel SAMV, SAMS, and SAME
This is a driver for the Atmel Cortex-M7 SAMV, SAMS, and SAME.
I started with the at91sam4.c driver and then restructured it
significantly to try to simplify it and limit the functionality
to just a flash driver, as well as to comply with the style guide.

Change-Id: I5340bf61f067265b8ebabd3adad45be45324b707
Signed-off-by: Morgan Quigley <morgan@osrfoundation.org>
Reviewed-on: http://openocd.zylin.com/2952
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2015-11-10 20:27:09 +00:00
Evan Hunter 987201c6dc Cortex A/R : Allow interrupt disable during single-step
Example usage:
	cortex_a maskisr on
	cortex_a maskisr off
	cortex_r maskisr on
	cortex_r maskisr off

Change-Id: I799288d9b848a06f561ba29ec1eb8e5eeace5685
Signed-off-by: Evan Hunter <ehunter@broadcom.com>
Reviewed-on: http://openocd.zylin.com/2876
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-07 20:36:13 +00:00
Evan Hunter 7ae5b45f75 Documentation : Add missing commands for ARM-v7A & R
Change-Id: I520fed122385d4d666bf91b754b1ac196b51d471
Signed-off-by: Evan Hunter <ehunter@broadcom.com>
Reviewed-on: http://openocd.zylin.com/2875
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
2015-11-07 20:30:30 +00:00
Jonathan Larmour 03e240f3bf helper/options: Use OPENOCD_SCRIPTS dir if set.
This makes it easier to relocate the install tree of OpenOCD from where
it was originally built (for example, if put onto a different machine),
without having to change scripts or add something to the command line
every time.

Change-Id: Ia5edf0eba166f7a999f267bd6a92402dab9b399e
Signed-off-by: Jonathan Larmour <jifl@eCosCentric.com>
Reviewed-on: http://openocd.zylin.com/3004
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-11-03 22:19:36 +00:00
fenugrec 4124e5deb4 docs: added note for increasing gdb remotetimeout when using the "gdb_port pipe" command.
Change-Id: I9c9514a193fd65454890571a17373b9c64d84757
Signed-off-by: fenugrec <fenugrec@users.sourceforge.net>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/3040
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30 13:12:54 +00:00
Andreas Färber 3084de185c doc: Fix sort order of flash drivers
fm3, nrf51, mdr, sim3x were at the end of the section rather than
inserted alphabetically. Fix this before adding further drivers.

Change-Id: Id23e04749cdd3b25d7503ec00fac554742d48c77
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3019
Tested-by: jenkins
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-10-30 13:07:50 +00:00
Austin Morton d28ab08cfa server: tcl_trace command
Implements async target trace output to the tcl server

Change-Id: I0178f6404447337d523782a1d2c317457030da40
Signed-off-by: Austin Morton <austinpmorton@gmail.com>
Reviewed-on: http://openocd.zylin.com/2588
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-09-05 09:19:26 +01:00
Robert Jordens d25355473d flash/nor/jtagspi: add JTAGSPI driver
Many FPGA board speak JTAG and have a SPI flash for their bitstream
attached to them. The SPI flash is programmed by first uploading a
proxy bitstream to the FPGA that connects the JTAG interface to the
SPI interface if the IR contains a certain USER instruction. Then the
SPI flash can be erase, written, read directly through the JTAG DR.

The JTAG and SPI signaling is compatible. Such a proxy bitstream only
needs to connect TDO-MISO, TDI-MOSI, TCK-CLK, and the activate the
chip select when the IR contains the special instruction and the JTAG
state machine is in the DR-SHIFT state.

Change-Id: Ibc21d793a83b36fa37e2704966aa5c837c4dd0d2
Signed-off-by: Robert Jordens <jordens@gmail.com>
Reviewed-on: http://openocd.zylin.com/2844
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06 13:14:08 +01:00
Robert Jordens 3edcb94186 flash/nor/tcl: add read_bank and verify_bank
The only read access to flash chips so is through the target's
memory. Flashes like jtagspi do not expose a memory mapped interface
to the flash. These commands use the flash_driver_read() driver API
directly.

Change-Id: I40b910de650114a3f676507f9f059a234377d862
Signed-off-by: Robert Jordens <jordens@gmail.com>
Reviewed-on: http://openocd.zylin.com/2842
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06 13:14:04 +01:00
Robert Jordens 2d99a0defa cpld/virtex2: allow JSTART to be disabled
This adds an option to disable the use of the JSTART instruction
when loading bitstreams to xilinx fpgas. JSTART apparently prevents
configuration if the startup clock is not set to the jtag clock in
the bitstream.

xc3sprog is omitting JSTART for all devices. Problems with loading a bitstream
that does not have StartupClk:JTAGClk are described here:
http://www.xilinx.com/support/answers/56151.html

Change-Id: I8137c0bae05a8c3c6f8e2611869f70a770d1651d
Signed-off-by: Robert Jordens <jordens@gmail.com>
Reviewed-on: http://openocd.zylin.com/2860
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06 13:14:01 +01:00
Paul Fertser 79fdeb37f4 manual: make it compatible with ancient texinfo versions that lack @raggedright
This is needed to unbreak build on systems that ship texinfo version
4.x.

Change-Id: Ie665d29b02bb65da7e8ed0d48d17fa56e231bd0d
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2781
Tested-by: jenkins
Reviewed-by: David Ung <davidu@nvidia.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Oleksij Rempel
2015-06-30 14:57:55 +01:00
Karl Palsson 218747dbd3 docs: gdb_target_description defaults enabled
This has been the case since c6216201 in 2013

Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Change-Id: I70232a46e29951f05f02dec00e0695d761697aa5
Reviewed-on: http://openocd.zylin.com/2764
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-05-17 21:17:13 +01:00
Paul Fertser 8de17eb65a manual: add missing usb blaster commands
Change-Id: Ie7fbb9f87a811c4add5b7c8f9581d5bbc90fa4f8
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2772
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-05-17 21:15:34 +01:00
Paul Fertser c6ba0a2240 manual: fix usb_blaster_pin command syntax and description
Change-Id: If3fbb2fe4f1842bea3962a6b903fd16aa9e8b545
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2771
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-05-17 21:15:24 +01:00
Paul Fertser 805604058b manual: reorder flash driver info
Put all the individual driver descriptions to where they really
belong, fix sectioning etc.

Change-Id: I94dc09e9a296ec57db4475f8dfb0a7d62a754aa4
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2770
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-05-17 21:14:43 +01:00
Paul Fertser ee5ecb8a29 manual: fix all overfull and underfull hboxes
Change-Id: Id84f16de5a3d1907e196d13007a312593bb6670a
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2769
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-05-17 21:14:11 +01:00
Paul Fertser 98861c54be manual: remove the lists of config files
Directory listings are volatile and serve no purpose in the
manual. Just remove them.

Change-Id: I63d54ba209c29eafb6608cf406b8ce5d8e9ee6c8
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2768
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-05-17 21:13:31 +01:00
Paul Fertser 03b72c367c flash/nor/mdr: add docs, remove memory leak on probe()
This adds the mandatory Info documentation for the driver as well as
the usage field.

As a clean up, this also includes freeing of the allocated memory
which results in a memory leak if probe is invoked multiple times.

Valgrind-tested.

Reported by Dmitry Shpak.

Change-Id: I2b1d9b9e8b069c6665b11d880b40ce19a1b26ce6
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2694
Tested-by: jenkins
Reviewed-by: Дмитрий Шпак <disona@yandex.ru>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-16 20:29:06 +01:00
Spencer Oliver 8d86633eb7 docs: update OpenOCD url's to openocd.org domain
Change-Id: I8b55c8d12773a1c36f2fd2afeecf20a74e890064
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2698
Tested-by: jenkins
2015-04-16 20:28:21 +01:00
Mahavir Jain ebbc9cb86c doc/openocd.texi: fix formatting for mrvlqspi driver documentation
* also included example for flash usage information

Change-Id: Icf9defc25d38bf24567b1708138b83a8de1e0497
Signed-off-by: Mahavir Jain <mjain@marvell.com>
Reviewed-on: http://openocd.zylin.com/2705
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-16 20:26:44 +01:00
Andreas Fritiofson 9dfb58e802 rtos: add instructions and helper code to make FreeRTOS work again
Run-time tested with FreeRTOS V8.1.2 (current version).

For the time being I propose this way of dealing with RTOSes that do
not export necessary information on their own.

I also suggest implementing a similar scheme for ChibiOS, exporting
the necessary struct fields' offsets via an OpenOCD-specific helper.

Change-Id: Iacf8b88004d62206215fe80011fd7592438446a3
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2347
Tested-by: jenkins
2015-04-16 20:23:46 +01:00
Tomas Vanek f3b1405fdd AT91SAM4L: handle reset run/halt in SMAP
This is a remake of http://openocd.zylin.com/1966
originally written by Angus Gratton <gus@projectgus.com>

ATSAM4L has a "System Manager Access Port" (SMAP) that holds the CPU
in reset if TCK is low when srst (RESET_N) is deasserted.
Without this change any use of sysresetreq or srst locks the chip
in reset state until power is cycled.

A new function smap_reset_deassert is called as reset-deassert-post event handler.
It optionally prepares reset vector catch and SMAP reset is released then.

Change-Id: Iad736357b0f551725befa2b9e00f3bc54504f3d8
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/2604
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 15:47:43 +01:00
Paul Fertser 19f219f731 Tcl exception codes cleanup, shutdown command amendments
This patch might influence openocd Tcl commands behaviour in subtle
ways, please give it a nice testing.

The idea is that if an OpenOCD Tcl command returns an error, an
exception is raised, and then the return code is propogated all the
way up (or to the "catch" if present). This allows to detect
"shutdown" which is not actually an error but has to raise an
exception to stop execution of the commands that follow it in the
script.

openocd_thread special-cases shutdown because it should then terminate
OpenOCD with a success error code, unless shutdown was called with an
optional "error" argument which means terminate with a non-zero exit
code.

Change-Id: I7b6fa8a2e24c947dc45d8def0008b4b007c478b3
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2600
Tested-by: jenkins
Reviewed-by: Juha Niskanen <juha.niskanen@haltian.com>
Reviewed-by: Jens Bauer <jens@gpio.dk>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2015-04-14 12:11:48 +01:00
Marian Cingel 06707fe159 doc: update RTOS section, add 'mqx' info
Change-Id: I20b93d49d275e6daaf5e39c49b4508c70c6fc56f
Signed-off-by: Marian Cingel <cingel.marian@gmail.com>
Reviewed-on: http://openocd.zylin.com/2592
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25 21:47:16 +00:00
Angus Gratton d90b86d8e3 transport: make 'transport select' auto-select the first available transport if not set
This should allow most of the existing configurations for older
versions to remain compatible without forcing the user to change his
or her config to explicitly select transport.

Also in some circumstances can remove the need to chain a "-c transport
select X" when building custom configs on the command line, which seems
like a common new user pitfall.

Change-Id: Ic87a38c0b9b88e88fb6d106385efce2f39381d3d
Suggested-by: Petteri Aimonen <jpa@git.mail.kapsi.fi>
Signed-off-by: Angus Gratton <gus@projectgus.com>
Reviewed-on: http://openocd.zylin.com/2551
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25 21:32:49 +00:00
Paul Fertser 6819468a78 armv7m_trace, stlink: provide APIs to capture trace with an adapter
Change-Id: I9d193dd5af382912e4fe838bd4f612cffd11b295
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2540
Tested-by: jenkins
2015-03-25 20:46:59 +00:00
Paul Fertser a09a75653d armv7m: add generic trace support (TPIU, ITM, etc.)
This provides support for various trace-related subsystems in a
generic and expandable way.

Change-Id: I3a27fa7b8cfb111753088bb8c3d760dd12d1395f
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2538
Tested-by: jenkins
2015-03-25 20:46:43 +00:00
Paul Fertser 571db89aa1 flash/nor/stellaris: allow to recover a locked device that can't be examined
Change-Id: I28536184053e2d1ba906620e728f7fad6ba39f0a
Reported-by: Ed Beroset <beroset@mindspring.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2552
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Ed Beroset <beroset@ieee.org>
2015-03-09 08:58:16 +00:00
Austin Morton 1d0cf0df37 server: tcl_notifications command
Implements async target notifications to the tcl server

Change-Id: I4d83e9fa209e95426c440030597f99e9f0c3b260
Signed-off-by: Austin Morton <austinpmorton@gmail.com>
Reviewed-on: http://openocd.zylin.com/2336
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-09 06:30:30 +00:00
Nemui Trinomius 199acf668e lpc2000: Add LPC407x/8x flash size auto detection
This patch adds auto flash size detection for LPC407x/8x series.

Tested on below listed chips.
LPC4088
LPC1788(regression test)

Change-Id: I82f62678a04eac9b84658bd6d1cfdf45be64c931
Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-on: http://openocd.zylin.com/2555
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Jens Bauer <jens@gpio.dk>
2015-03-09 06:26:06 +00:00
Robert P. J. Day 41124ea992 Remove long-deprecated "target count" and "target number" commands.
Given that the manual states that these two subcommands are
deprecated and were scheduled to be removed back in 2010,
remove them and the corresponding documentation from the
manual.

Change-Id: Iaac633349d7fcb8b7f964109c7d26dd0cc5fc233
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-on: http://openocd.zylin.com/1860
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22 17:56:16 +00:00