Commit Graph

698 Commits

Author SHA1 Message Date
Spencer Oliver 8d86633eb7 docs: update OpenOCD url's to openocd.org domain
Change-Id: I8b55c8d12773a1c36f2fd2afeecf20a74e890064
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2698
Tested-by: jenkins
2015-04-16 20:28:21 +01:00
Paul Fertser 68921d2316 tcl/target/stm32f3: fix reset init for stlink
Use mmw to manipulate only selected bits of the word. msb and mwb verify the
memory location and may error on PLLRDY set as a result of PLLON written.

Change-Id: I9a4c1e58f002a1e5e99be1bd34aac27ba65d111d
Reported-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2702
Tested-by: jenkins
2015-04-16 20:26:36 +01:00
Felipe Balbi da7b65a93b board: ti_am43xx_evm: remove xds100v2 interface
GP and EPOS EVMs do not provide xds100v2 on board,
rather they have a pin header which can be used
to attach any debug pod the user might want.

Change-Id: I61678c50900fbe0fab500ea42f85ecde7a490ded
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2618
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-16 20:24:37 +01:00
Tomas Vanek f3b1405fdd AT91SAM4L: handle reset run/halt in SMAP
This is a remake of http://openocd.zylin.com/1966
originally written by Angus Gratton <gus@projectgus.com>

ATSAM4L has a "System Manager Access Port" (SMAP) that holds the CPU
in reset if TCK is low when srst (RESET_N) is deasserted.
Without this change any use of sysresetreq or srst locks the chip
in reset state until power is cycled.

A new function smap_reset_deassert is called as reset-deassert-post event handler.
It optionally prepares reset vector catch and SMAP reset is released then.

Change-Id: Iad736357b0f551725befa2b9e00f3bc54504f3d8
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/2604
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 15:47:43 +01:00
Uwe Bonnes 2175bb149a turtelizer2-revC: Tested with real hardware.
Also some hints around deprecated tcl/interface/turtelizer2.cfg added.

Change-Id: Ifa57b49febffaeddd5d8ff0a48833d3544927b10
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2584
Tested-by: jenkins
Reviewed-by: Harald Kipp
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 12:07:22 +01:00
Andreas Färber 39a7085d36 tcl/board: Add Infineon XMC 2Go config
Tested with "J-Link Lite-XMC4200 Rev.1 compiled Jan 10 2014 20:31:33".

Change-Id: Iefa9185372341d889db2b5f1f93bce126450b535
Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2564
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:53:20 +01:00
Andreas Färber e8aa3524d2 tcl/board: Add Infineon XMC1100 Boot Kit config
Tested with "J-Link Lite-XMC4200 Rev.1 compiled Jul 18 2014 17:28:26".

Change-Id: Icc03172cefe38f2217bf44a73f94f8a6fb93dfba
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2472
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:52:35 +01:00
Andreas Färber a5844ace23 tcl/target: Add Infineon XMC1000 family target config
Basic target config, verified against XMC1100 AA/AB, XMC1200 AA/AB,
XMC1300 AA/AB manuals.

The default adapter_khz was tested with the XMC1100 Boot Kit.

Change-Id: Iff6ed52d875ccb83c0d4ff0d555b90e0f28b860c
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2471
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:52:20 +01:00
Andreas Färber aee1b1d570 tcl/board: Add Spansion SK-FM4-176L-S6E2CC config
Works best after update to firmware v2.3.

Change-Id: Id2d3a0ae28bba014ee5338df9280fe39773c3398
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2570
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:51:32 +01:00
Andreas Färber fd23fb4c6e tcl/target: Add Spansion FM4 config
Assembled by trial-and-error for an S6E2CC.

Change-Id: I317c12d24c9075ce3de286455fa3ee45731c5c81
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2569
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:50:44 +01:00
Ed Beroset 7a7086e644 em357: Corrected EM357 support including errata details
Original submitted code had only been tested with em358, but testing with
actual em357 revealed errors that this patch corrects.

Change-Id: I70cf31210de8ed84e3755a56e76261ad200322bb
Signed-off-by: Ed Beroset <beroset@ieee.org>
Reviewed-on: http://openocd.zylin.com/2581
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:48:50 +01:00
Paul Fertser d06b09595b tcl/interface/parport: default to sane value on non-windows systems
When using ppdev driver 0 is the most appropriate default value as it
corresponds to /dev/parport0. Raw port address is suitable only for
direct access (I think that's parport-giveio on windows).

Reported by danitool on IRC.

Change-Id: I983c22251de6601b433ad31aaf660fb664cee7e9
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2572
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:42:32 +01:00
Jeff Ciesielski 7407046e3d tcl/board: Add Infineon XMC4500 Relax Kit config
Tested with "J-Link Lite-XMC4000 Rev.1 compiled Dec  7 2012 19:23:07"
on XMC4500 Relax Lite Kit V1.

Change-Id: Ib680a444fa4cadbf640afba15d607c0e6bd4ab2c
Signed-off-by: Jeff Ciesielski <jeffciesielski@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2567
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:38:19 +01:00
Jeff Ciesielski 58aee57883 tcl/board: Add Infineon XMC4200 Application Kit config
Change-Id: I3a946ba3745da651d470cd574222ba5c7147ac9d
Signed-off-by: Jeff Ciesielski <jeffciesielski@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2566
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:37:40 +01:00
Andreas Färber df22965783 tcl/board: Add Infineon XMC4500 Application Kit configs
Tested CPU_45A-V2 (General Purpose) with ARM-USB-TINY-H (via SWD) and
with "J-Link Lite-Cortex-M V8 compiled Jul 17 2014 11:40:12" firmware.

Tested CPU_45B-V1-006 (SDRAM) with ARM-USB-TINY-H (via SWD) and
with "J-Link Lite-XMC4200 Rev.1 compiled Jul 18 2014 17:28:26" firmware.

Change-Id: I3451117606551671ec77722f6adf7d7a6a4bd576
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2481
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:36:58 +01:00
Andreas Färber c048d1f7b1 tcl/target: Add Infineon XMC4000 family config
Base config, verified against XMC4500, XMC4400 and XMC4100/XMC4200 manuals.

Change-Id: I10907bdf307bc6d11dc5454bf5391758de49dc30
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2480
Tested-by: jenkins
Reviewed-by: Jeff Ciesielski <jeffciesielski@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:36:04 +01:00
Felipe Balbi b1f3e89970 tcl: icepick: add icepick_d_set_coreid
this is just to avoid open coding that in
icepick_d_tapenable. Cleanup only, no functional
changes.

Change-Id: Iabd20291b7bdd95957afa1c74f52171789201227
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2624
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:23:56 +01:00
Felipe Balbi c32f81f718 target: icepick: call icepick_c_setup
it also works on icepick_d.

Change-Id: I50c0c81286aae673c94ea77e47454ff48eab1668
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2623
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:22:47 +01:00
Felipe Balbi b6cb48c212 target: icepick: switch over to icepick_c_router
Reusing what's already there to ease maintainability.

Change-Id: I2030581669c644e2d9d9f9968075ab6344445d04
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2622
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:22:07 +01:00
Felipe Balbi 1d8c36e16a tcl: target: am437x: pass coreid
This commit is only for the sake of completeness as
default coreid is zero. In any case, coreids 1-4 are
used for the different PRU cores inside the SoC.

Change-Id: I775f2f444b1a908ffaf7bdbc43bcc966f19668c4
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2621
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:21:05 +01:00
Felipe Balbi beb61c6999 target: am437x: use more descriptive names
Use more descriptive names for JRC and DAPs
so they more closely match documentation.

For example there's no Cortex A9 DAP, that's
the DebugSS DAP where Cortex A9 target sits. In
that same DAP we have have ETM, STM and both
dual-PRU subsystems.

Change-Id: I0e66ebb6299763f96606fae3e4c62e5785c804f2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2620
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:19:56 +01:00
Felipe Balbi 0c20f1ff3f target: am437x: fix DebugSS DAP ID
Main DAP (where Cortex A9 sits) ID is actually
0x46b6902f. Fix it.

Change-Id: Ifa3335186bcf60d264d4ecea477bfe2f5ca10ead
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2619
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:18:48 +01:00
Felipe Balbi c8fe9f6b4c tcl: board: add AM437x IDK support
Add support for Texas Instruments AM437x
Industrial Development Kit support.

Change-Id: I33ed71c7392c3805a86cf2c8adce83c0e8aa323d
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2617
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:17:16 +01:00
Felipe Balbi 5df0dfb7f4 tcl: am437x: add reset-init event handler
this event handler will configure and lock PLLs
and configure DDR so platform is placed in usable
state.

Change-Id: Idd02f4c9789181d69578f8606ac3576ea1dd8a0b
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2616
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:15:57 +01:00
Felipe Balbi d85a0a6a0c tcl: am437x: disable watchdog on reset-end
sometimes, watchdog might be left running and
it could expire in the middle of a debug session,
to prevent that, just make sure to disable watchdog
on reset-end if current state is 'halted'.

Change-Id: Ib4f2a2321cba17cd8c56ca3ae63114a563a6de90
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2615
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:11:52 +01:00
Felipe Balbi 92a01329c9 tcl: am437x: define registers to be used later
a later commit will implement a proper reset-init
handler to lock pll and configure ddr as we should.

Change-Id: I432cf28a5a944bfa83c20aed7298dbd29df30e38
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2614
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:09:41 +01:00
Felipe Balbi f0d10751fa tcl: board: ti_am43xx_evm: follow xds100v2 requirements
xds100v2 asks us to call these three commands to
guarantee proper behavior, so do it.

Change-Id: Iecf9c148ce7c2082ef915b46eeb511ceea395cc3
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2613
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:07:21 +01:00
Felipe Balbi 03a661a52d tcl: board: ti_am437x_evm: select jtag transport
default already is jtag, but this silences a
warning during startup.

Change-Id: I94478327bbb259649500ef74a5b5c10d51e2a517
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2612
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:00:45 +01:00
Felipe Balbi 0baecf9943 tcl: target: am437x: use entire SRAM area
According to AM4379 TRM [1], table 2-1 L3 Memory Map,
we have a total of 256KiB and there's no reason not to
use it all.

[1] http://www.ti.com/lit/ug/spruhl7b/spruhl7b.pdf

Change-Id: I117f2afe721bc4e3f0df304d3542e1a91aa69d12
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2611
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 10:59:47 +01:00
Felipe Balbi 589affe35b tcl: target: am437x.cfg: pass correct dbgbase
Since commit ec9ccaa288 (arm_adi_v5: make dap_lookup_cs_component()
traverse subtables and handle multicore) AM437x devices can't be used
with OpenOCD anymore. The reason is that dbgbase used to be set to zero
before that commit and that just happens to work with AM437x devices.

A more robust solution is to pass correct dbgbase when creating the
target, which this commit does.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Change-Id: Iaf2617804324de8094b25137943e08b84f14c75f
Reviewed-on: http://openocd.zylin.com/2602
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-04-14 10:59:08 +01:00
Uwe Bonnes 2af366259f Add configuration for EFM32 Gecko boards with Segger J-Link.
Tested with Tiny Gecko.

Change-Id: Iddb87170b6aaaf7f15d3c4517c8661dd6394be8f
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2585
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25 21:40:57 +00:00
Angus Gratton d90b86d8e3 transport: make 'transport select' auto-select the first available transport if not set
This should allow most of the existing configurations for older
versions to remain compatible without forcing the user to change his
or her config to explicitly select transport.

Also in some circumstances can remove the need to chain a "-c transport
select X" when building custom configs on the command line, which seems
like a common new user pitfall.

Change-Id: Ic87a38c0b9b88e88fb6d106385efce2f39381d3d
Suggested-by: Petteri Aimonen <jpa@git.mail.kapsi.fi>
Signed-off-by: Angus Gratton <gus@projectgus.com>
Reviewed-on: http://openocd.zylin.com/2551
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25 21:32:49 +00:00
Paul Fertser ef02b69b14 drivers/cmsis-dap: port to common SWD framework
Valgrind-tested.

Comparison of flashing performance on an FRDM-KL25Z board running mbed
CMSIS-DAP variant, 5MHz clock, old driver:

wrote 28096 bytes from file demo.elf in 26.833590s (1.023 KiB/s)
verified 27264 bytes in 1.754972s (15.171 KiB/s)

this implementation:

wrote 28096 bytes from file demo.elf in 3.691939s (7.432 KiB/s)
verified 27264 bytes in 0.598987s (44.450 KiB/s)

Also tested "Keil ULINK-ME CMSIS-DAP" with an STM32F100 target, 5MHz
clock, results reading from flash, old driver:

dumped 131072 bytes in 98.445305s (1.300 KiB/s)

this implementation:

dumped 131072 bytes in 8.242686s (15.529 KiB/s)

Change-Id: Ic64d3124b1d6cd9dd1016445bb627c71e189ae95
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2356
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25 21:31:09 +00:00
Paul Fertser 1bc6a81138 tcl/board/twr-k60f120m: remove useless flash bank 0 definition
Since the very first flash bank is already defined in target/kx.cfg,
there's no sense in repeating it.

Reported and tested by Richard Braun.

Change-Id: I417b7072b5e6675ddbf824446e7581b8b7da8f4b
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2595
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25 20:48:11 +00:00
Paul Fertser a09a75653d armv7m: add generic trace support (TPIU, ITM, etc.)
This provides support for various trace-related subsystems in a
generic and expandable way.

Change-Id: I3a27fa7b8cfb111753088bb8c3d760dd12d1395f
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2538
Tested-by: jenkins
2015-03-25 20:46:43 +00:00
Uwe Bonnes 3e1dfdcb85 stm32l1.cfg: Add missing dash to fix f7394049d3 commit.
Change-Id: Ifeb2d4fc2b43813edbc6fe2cf08bfd4c55cd1e86
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2590
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Stian Skjelstad <stian@nixia.no>
2015-03-10 07:35:37 +00:00
Andreas Fritiofson 8d80a25410 tcl: Add default hooks for STM32F3x
Keep clocks running in low power modes. Stop watchdogs from interfering
with the debug session. Set up PLL and increase clock at reset init.

Change-Id: I984d2018f7d47a1042f1e12894563154fa7b566c
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2196
Tested-by: jenkins
Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-03-09 09:20:09 +00:00
Matthijs van Duin dab4adb5ec tcl/interface/ftdi/xdsv2: fix and clarify EMU* signals
The signal names are changed for consistency with TI's docs and
sources.

Change-Id: Ic5c5314daa20f6f610be8a848399f951d47aa137
Signed-off-by: Matthijs van Duin <matthijs@rinnic-vaude.nl>
Reviewed-on: http://openocd.zylin.com/2231
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-03-09 06:27:45 +00:00
Uwe Bonnes f7394049d3 stm32l1.cfg: Add ID Code of Cat.2 devices.
Change-Id: I4eb5020858c1896e294d633213f3df3fa45b6250
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2517
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
2015-03-09 06:26:45 +00:00
Uwe Bonnes a20db2d205 stm32f3x.cfg: Remove duplicate item.
Change-Id: I812c36688add73fab2e74fc112c733c5d3c201a6
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2554
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-03-09 06:26:28 +00:00
Nemui Trinomius 199acf668e lpc2000: Add LPC407x/8x flash size auto detection
This patch adds auto flash size detection for LPC407x/8x series.

Tested on below listed chips.
LPC4088
LPC1788(regression test)

Change-Id: I82f62678a04eac9b84658bd6d1cfdf45be64c931
Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-on: http://openocd.zylin.com/2555
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Jens Bauer <jens@gpio.dk>
2015-03-09 06:26:06 +00:00
Arne Wichmann e3b43b77e9 target & board: AT91SAM7A2 and Olimex SAM7-LA2
Initial Support for AT91SAM7A2 on Olimex SAM7-LA2 board.
The board seems not to be able to reset into halted mode, as srst is
connected to NRESET of the cpu (configured srst_pulls_trst).
JTAG RCLK is connected to CLK.
Tested with interface/ftdi/olimex-arm-usb-ocd-h.cfg.

Change-Id: I2bdd67e3683e45f1119c5850bad294aa107891d8
Signed-off-by: Arne Wichmann <arne.wichmann@gmail.com>
Reviewed-on: http://openocd.zylin.com/2318
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-03-09 06:25:03 +00:00
Paul Fertser 40d6e88268 cfg: add board and target configs for TI SimpleLink Wi-Fi CC3200 LaunchPad
Change-Id: I4396ee737c1dad380aa23894bbd1faf75f26d072
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2465
Tested-by: jenkins
2015-02-22 19:00:34 +00:00
Uwe Bonnes be97da76ab Provide genuine F3 nucleo config and source it for STM32F334 Discovery board.
The F334 disco board has a stlink V.2-1 as F3 nucleo boards. Normal F3 disco
boards use stlink v2 and can't ne used.

Change-Id: I77ebef93b184592f25ff18bb2da776d636f60ff0
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2434
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22 17:59:55 +00:00
Oleksij Rempel 2b0beed4b1 tcl/target|board: add configs for Alphascale asm9260t
This adds configs for Alphascale asm9260t ARM based SoC and
Evaluation Kit based on this chip.

Change-Id: Id8d3a1ef204e3ae84540c2693e3d62650ba82f73
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/2515
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22 17:57:02 +00:00
Andreas Fritiofson 10331d2007 cfg: Fix Kinetis kwikstik/kx config
The flash definition belongs in the target cfg. Add some working area
and suitable reset_config.

Make kx.cfg more similar to klx.cfg.

Disable rclk as it is dead slow and a fixed 1MHz clock seems to work.

Change-Id: I8328f179c3a33be64403da93616abb48651bdfe6
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2227
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22 16:23:48 +00:00
Anton Kuzmin abdd5680cd tcl/interface/ftdi: correct LED config for BusBlaster KT-Link
Configure the LED to be off by default, blink on activity.

Change-Id: I8515ee66c49bddf866268b85811be15c2dbc086c
Signed-off-by: Anton Kuzmin <anton.kuzmin@cs.fau.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2539
Tested-by: jenkins
2015-02-11 22:05:39 +00:00
Andreas Bomholtz bdbe78f131 sim3x: new flash driver for Silabs SiM3 microcontroller family
This is a new driver for Silicon Laboratories SiM3 microcontroller
family, based on the work of Ladislav Bábel. The driver will try to
detect the type of MCU from the device id register, and if this
fails it will use the flash size from the flash bank command.
Driver added to the documentation and to the README.
TCL script added.

Tests:
* Hardware: SiM3C166 (pre-production) and SiM3U167
* Binary: 4kb, 197kb, 256kb
* Flash protect not tested

Change-Id: I701e0cf505ca8ad99be7f83543fe5055b2f65dcc
Signed-off-by: Andreas Bomholtz <andreas@seluxit.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2078
Tested-by: jenkins
2015-02-11 22:05:22 +00:00
Angus Gratton 233f8859c0 nrf51 - Add async loader. Performance on nrf51822QAA/stlink-v2 from ~3.5KiB/s to ~19.5KiB/s.
Change-Id: Ib0bf41a0cec85f0bd5728551f8ad7f6255e4ea04
Signed-off-by: Angus Gratton <gus@projectgus.com>
[spamjunkeater@gmail.com: Cleanup buffer allocation, detect -1 for unknown pages]
Signed-off-by: Erdem U. Altunyurt <spamjunkeater@gmail.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2204
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-02-11 22:00:46 +00:00
Joerg Fischer fb9277191b J-Link serial number config option
Add serial option to jlink config commands, handy when there is more than one
adapter connected.

To select adapter 0123456 for OpenOCD, use

jlink serial 0123456

Change-Id: Ib29ce3f0c4975e1169211721a4531bf4db61f1ee
Signed-off-by: Joerg Fischer <turboj@gmx.de>
Reviewed-on: http://openocd.zylin.com/2521
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11 16:18:25 +00:00